ATF-10136 HP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Low Noise Figure: 0.5 dB Typical at 4 GHz
  • Low Bias: VDS = 2 V, IDS␣ =␣ 20 mA
  • High Associated Gain: 13.0 dB Typical at 4 GHz
  • High Output Power: 20.0 dBm Typical P1 dB at 4 GHz
  • Cost Effective Ceramic Microstrip Package
  • Tape-and Reel Packaging Option Available [1] ATF-10136 36 micro-X Package Electrical Specifications, TA = 25°C Symbol Parameters and Test Conditions Units Min. Typ. Max. NFO Optimum Noise Figure: VDS = 2 V, IDS = 25 mA f = 2.0 GHz dB 0.4 f = 4.0 GHz dB 0.5 0.6 f = 6.0 GHz dB 0.8 GA Gain @ NFO; VDS = 2 V, IDS = 25 mA f = 2.0 GHz dB 16.5 f = 4.0 GHz dB 12.0 13.0 f = 6.0 GHz dB 11.0 P1 dB Power Output @ 1 dB Gain Compression f = 4.0 GHz dBm 20.0 VDS = 4 V, IDS = 70 mA G1 dB 1 dB Compressed Gain: VDS = 4 V, IDS = 70 mA f = 4.0 GHz dB 12.0 gm Transconductance: VDS = 2 V, VGS = 0 V mmho 70 140 IDSS Saturated Drain Current: VDS = 2 V, VGS = 0 V m A 70 130 180 VP Pinchoff Voltage: VDS = 2 V, IDS = 1 mA V -4.0 -1.3 -0.5 Note: 1. Refer to PACKAGING section “Tape-and-Reel Packaging for Surface Mount Semiconductors.”

Description

The ATF-10136 is a high performance gallium arsenide Schottky-barrier- gate field effect transistor housed in a cost effective microstrip package. Its premium noise figure makes this device appropriate for use in the first stage of low noise amplifiers operat- ing in the 0.5-12 GHz frequency range. This GaAs FET device has a nominal 0.3 micron gate length using airbridge interconnects between drain fingers. Total gate periphery is 500 microns. Proven gold based metallization systems and nitride passivation assure a rugged, reliable device. 5965-8701E

Typical Scattering Parameters, Common Source, ZO = 50 Ω , TA =2 5°C, VDS =2 V , IDS␣=␣ 25 mA Freq. S 11 S21 S12 S22 36 micro-X Package Dimensions 1 3 SOURCE SOURCE DRAIN GATE 2.15 (0.085) 2.11 (0.083) DIA. 0.508 (0.020) 2.54 (0.100) 4.57 – 0.25 0.180 – 0.010 0.15 – 0.05 (0.006 – 0.002) Notes: 1. Dimensions are in millimeters (inches) 2. Tolerances: in .xxx = – 0.005 mm .xx = – 0.13 0.56 (0.022) 1.45 – 0.25 (0.057 – 0.010) 101