MMRF1012N NXP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
Features
Characterized with Series Equivalent Large- -Signal Impedance Parameters Qualified Up to a Maximum of 50 V DD Operation Integrated ESD Protection 225C Capable Plastic Package In Tape and Reel. R1 Suffix = 500 Units, 24 mm Tape Width, 13- -inch Reel. Table 1. Maximum Ratings Table 2. Thermal Characteristics
- Continuous use at maximum temperature will affect MTTF.
- MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access
MTTF calculators by product. Select Documentation/Application Notes - - AN1955. the source terminal for the transistor. Figure 1. Pin Connections Freescale Semiconductor, Inc., 2014.All rights reserved.
Freescale Semiconductor, Inc. Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics(TA =2 5C unless otherwise noted) mounting) PRIOR TO STARTING SYSTEM DESIGNto ensure proper mounting of this device.
Freescale Semiconductor, Inc. Figure 2. MMRF1012NR1 Test Circuit Schematic Table 6. MMRF1012NR1 Test Circuit Component Designations and Values
Freescale Semiconductor, Inc. Figure 3. MMRF1012NR1 Test Circuit Component Layout
Freescale Semiconductor, Inc. Figure 15. Series Equivalent Source and Load Impedance
Freescale Semiconductor, Inc. Figure 16. MMRF1012NR1 Test Circuit Component Layout — 130 MHz Table 7. MMRF1012NR1 Test Circuit Component Designations and Values — 130 MHz
Freescale Semiconductor, Inc. Figure 17. MMRF1012NR1 Test Circuit Component Layout — 450 MHz Table 8. MMRF1012NR1 Test Circuit Component Designations and Values — 450 MHz
Freescale Semiconductor, Inc. Figure 18. MMRF1012NR1 Test Circuit Component Layout — 64 MHz Table 9. MMRF1012NR1 Test Circuit Component Designations and Values — 64 MHz
Freescale Semiconductor, Inc. Figure 19. Series Equivalent Source and Load Impedance
Freescale Semiconductor, Inc.
50 OHM TYPICAL CHARACTERISTICS
Table 10. Common Source S- -Parameters(VDD =5 0V ,IDQ =3 0m A ,TA =2 5C, 50 Ohm System)
Freescale Semiconductor, Inc. Table 10. Common Source S- -Parameters(VDD =5 0V ,IDQ =3 0m A ,TA =2 5C, 50 Ohm System)(continued)
Freescale Semiconductor, Inc. MMRF1012NR1 PACKAGE DIMENSIONS
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc. MMRF1012NR1
Freescale Semiconductor, Inc. PRODUCT DOCUMENTATION AND SOFTWARE Refer to the following resources to aid your design process. Application Notes AN1907: Solder Reflow Attach Method for High Power RF Devices in Plastic Packages AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins EB212: Using Data Sheet Impedances for RF LDMOS Devices Software Electromigration MTTF Calculator For Software, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool.
REVISION HISTORY
The following table summarizes revisions to this document. Revision Date Description
0 July 2014 Initial Release of Data Sheet
Freescale Semiconductor, Inc. MMRF1012NR1 Information in this document is provided solely to enablesystem and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particularpurpose, nor does Freescale assume any liability arisingout of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., respective owners. E 2014 Freescale Semiconductor, Inc. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Document Number: MMRF1012N Rev. 0, 7/2014