AT90-1283 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Attenuation: 0.5 dB Steps to 15.5 dB
  • Single Positive Supply
  • Contains Internal DC to DC Converter
  • Low DC Power Consumption
  • Small Footprint, JEDEC Package
  • Integral TTL Driver
  • 50 ohm Impedance
  • CSP-1 Package

Description

M/A-COM's AT90-1283 is a GaAs FET 5-bit digital attenuator with integral TTL driver. Step size is 0.5 dB providing a 15.5 dB total attenuation range. This device is in an PQFN plastic surface mount package. The AT90-1283 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required. For dual supply designs without switching noise, use AT90- 0283.

Ordering Information

AT90-1283TR 1000 piece reel AT90-1283-TB Sample Test Board Note: Reference Application Note M513 for reel size information. Schematic with Off-Chip Components Pin Configuration3 Pin No. Function Pin No. Function

1 GND 17 NC

2 C8 18 NC

3 C4 19 Vcc

4 C2 20 NC

5 C1 21 Cp

6 C0.5 22 NC

7 GND 23 Cp

8 NC 24 NC

9 NC 25 VEE

10 NC1 26 GND

11 GND 27 RF2

12 RF1 28 GND

13 GND 29 NC1

14 NC 30 VEE

15 NC 31 NC

16 NC 32 Vcc

  1. Pins 10 and 29 must be isolated. 2. V EE is produced internally and requires a .1 µF cap to GND. Generated noise is typical of switching DC-DC Converters. 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages)

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC-3.5 GHz Rev. V11 AT90-1283 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = +25°C Parameter Frequency Units Min Typ Max Insertion Loss DC - 3.5 GHz dB — 2.8 3.2 Attenuation Accuracy DC - 3.5 GHz DC - 3.5 GHz DC - 3.5 GHz dB dB dB ±(.3 +5% of atten setting) ±(.4 +10% of atten setting) ±(.5 +7% of atten setting) VSWR DC - 3.5 GHz Ratio — 1.6:1 1.8:1 Switching Speed — ns ns 150 1 dB Compression 50 MHz 0.5 - 3.5 GHz dBm dBm +21 +29 Input IP3 50 MHz 0.5-3.5 GHz dB dB +35 +48 Vcc — V 4.75 5.0 5.25 VIL VIH V V 0.0 2.0 0.8 5.0 lin (Input Leakage Current) — uA -1.0 — 1.0 Test Conditions Individual Bits 0.5-1-4-8 dB Individual Bit 2 dB Any Combination of Bits 1 to 15.5 dB Full Range 50% Cntl to 90%/10% RF 10% to 90% or 90% to 10% Two-tone inputs up to +5 dBm LOW-level input voltage HIGH-level input voltage Vin = VCC or GND Icc4 Vcc min to max, Logic “0” or “1” — mA — 6 10 Turn-on Current5 For guaranteed start-up — mA — — 125 Switching Noise Generated from DC-DC Converter with recommended capacitors

3.5 MHz dBm — -93 —

Thermal Resistance θjc — — °C/W — 15 — ΔIcc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V — mA — — 1.0 4. During turn-on, the device requires an initial start up current (Icc) specified as “Turn-on Current”. Once operational, Icc will drop to the specified levels. 5. The DC-DC converter is guaranteed to start in 100 µs as long as the power supplies have the maximum turn-on current available for start-up. Absolute Maximum Ratings 6,7 Parameter Absolute Maximum Max. Input Power

0.05 GHz

0.5 - 3.5 GHz +27 dBm +34 dBm VCC -0.5V ≤ VCC ≤ +6.0V Vin8 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. 8. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electric ity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC-3.5 GHz Rev. V11 AT90-1283 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. VSWR @ Insertion Loss Typical Performance Curves Insertion Loss Recommended PCB Configuration9 9. Application Note C2083 is available on line at www.macom.com Truth Table (Digital Attenuator) C8 C4 C2 C1 C0.5 Attenuation 0 0 0 0 0 Loss, Reference 0 0 0 0 1 0.5 dB 0 0 0 1 0 1.0 dB 0 0 1 0 0 2.0 dB 0 1 0 0 0 4.0 dB 1 0 0 0 0 8.0 dB 1 1 1 1 1 15.5 dB 0 = TTL Low; 1 = TTL High 1. 0 1. 5 2.0 2.5 3.0 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) Loss (dB) 1. 0 0 1. 2 5 1. 50 1. 75 0 500 1 000 1 500 2000 2500 3000 3500 F requency (M Hz) VSWR Ratio Input Output

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC-3.5 GHz Rev. V11 AT90-1283 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Attenuation Error, 1 dB Bit Attenuation Error, 2 dB Bit Attenuation Error, 4 dB Bit Typical Performance Curves Attenuation Error, 8 dB Bit Attenuation Error, Max. Attenuation Attenuation Error, 0.5 dB Bit -1 .0 -0.5 0.0 0.5 1. 0 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) Error (dB) -1 .0 -0.5 0.0 0.5 1. 0 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) Error (dB) -1 .0 -0.5 0.0 0.5 1. 0 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) Error (dB) -0.5 0.0 0.5 1. 0 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) Error (dB) -0.5 0.0 0.5 1. 0 0 500 1 000 1 500 2000 25 00 3000 3500 Fre qu e n cy (MHz ) Error (dB) -1 .0 0.0 1. 0 2.0 3.0 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) Error (dB)

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC-3.5 GHz Rev. V11 AT90-1283 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. VSWR, 1 dB Bit VSWR, 2 dB Bit VSWR, 4 dB Bit Typical Performance Curves VSWR, 8 dB Bit VSWR, Maximum Attenuation VSWR, 0.5 dB Bit 1. 0 1. 2 1. 4 1. 6 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) VSWR Ratio Input Output 1. 0 1. 2 1. 4 1. 6 0 500 1 000 1 500 2000 2500 3000 3500 F requency (MHz) VSWR Ratio Input Output 1. 0 1. 2 1. 4 1. 6 1. 8 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) VSWR Ratio Input Output 1. 0 1. 2 1. 4 1. 6 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) VSWR Ratio Input Output 1. 0 1. 2 1. 4 1. 6 0 500 1 000 1 500 2000 2500 3000 3500 F requency (MHz) VSWR Ratio In pu t Ou tpu t 1. 0 1. 2 1. 4 1. 6 1. 8 0 500 1 000 1 500 2000 2500 3000 3500 Fre qu e n cy (MHz ) VSWR Ratio Input Output

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC-3.5 GHz Rev. V11 AT90-1283 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. CSP-1, 4 x 6 mm, 32-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations.