AT65-0283-TB

AT65-0283 MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

n Attenuation: 0.5 dB Steps to 15.5 dB n Low DC Power Consumption n Plastic SOIC, Wide Body, SMT Package n Integral TTL Driver n 50 ohm Impedance n Test Boards are Available n Tape and Reel Packaging Available

Description

M/A-COM's AT65 -0283 is a GaAs FET 5 -bit digital attenuator with integral TTL driver. Step size is 0.5 dB providing a 15.5 dB total attenuation range. This device is in a SOIC -16 plastic surface mount package. The AT65-0283 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required. Package outline conforms to JEDEC standard MS-013AA. Parameter Test Conditions Frequency Units Min Typical Max Insertion Loss — DC - 1.0 GHz DC - 2.0 GHz dB dB 2.0 2.3 2.5 2.7 Attenuation Accuracy Any Bit Any Combination of Bits DC - 2.0 GHz DC -2.0 GHz dB dB ±(.3 +4% of atten) ± (.3 +6% of atten) VSWR Full Range DC - 2.0 GHz Ratio — 1.5:1 1.8:1 Switching Speed 1 50% Cntl to 90%/10% RF 10% to 90% or 90% to 10% nS nS 150 1 dB Compression —

50 MHz

0.5 - 2.0 GHz dBm dBm +21 +29 Input IP3 Two-tone inputs up to +5 dBm 50 MHz 0.5-2.0 GHz dB dB +35 +48 Vcc -Vee V V 4.75 -8.0 5.0 -5.0 5.25 -4.75 Logic “0” Sink Current is 20 µA max. — V 0.0 — 0.8 Logic “1” Source Current is 20 µA max. — V 2.0 — 5.0 Icc Vcc min to max, Logic “0” or “1” — mA — 0.2 6 -Iee -Iee min to max, Logic “0” or “1” — mA — -0.2 -1 1. Decoupling capacitors (.01 µF) are required on power supply lines.

Digital Attenuator, 15.5 dB, 5-Bit, TTL Driver, DC - 2.0 GHz AT65-0283 Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 6.00 Pin Configuration Pin # Function Pin # Function

1 RF 9 C8

2 GND 10 Vcc

3 GND 11 Vee

4 GND 12 C4

5 GND 13 C2

6 GND 14 C1

7 GND 15 C0.5

8 RF 16 GND

Absolute Maximum Ratings 2 Parameter Absolute Maximum Max. Input Power

0.05 GHz

0.5 - 2.0 GHz +27 dBm +34 dBm +Vcc +5.5V -Vee -8.5V Logic Voltages 3 -0.5 to Vcc + 0.5V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 2. Operation of this device above any one of these parameters may cause permanent damange. 3. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Truth Table C8 C4 C2 C1 C0.5 Attenuation 0 0 0 0 0 Loss, Reference 0 0 0 0 1 0.5 dB 0 0 0 1 0 1.0 dB 0 0 1 0 0 2.0 dB 0 1 0 0 0 4.0 dB 1 0 0 0 0 8.0 dB 1 1 1 1 1 15.5 dB 0 = TTL Low; 1 = TTL High Typical Performance Curves Attenuation Accuracy Attenuation Accuracy Insertion Loss 1.00 1.50 2.00 2.50 0 500 1000 1500 2000 Frequency (MHz) Insertion Loss (dB) -0.2 -0.1 0.0 0.1 0.2 0.3 0.4 0 500 1000 1500 2000 Frequency (MHz) Deviation (dB) 4 dB Bit0.5, 1, 2 dB Bits -0.2 0.0 0.2 0.4 0.6 0.8 1.0 0 500 1000 1500 2000 Frequency (MHz) Deviation (dB) Max. Attenuation8 dB

Digital Attenuator, 15.5 dB, 5-Bit, TTL Driver, DC - 2.0 GHz AT65-0283 Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 6.00 Typical Performance Curves VSWR RFout, 0.5, 1, 2 & 4 dB Bits VSWR @ Insertion Loss VSWR RFin, 0.5, 1, 2, 4, 8 dB Bits and Max Attenuation VSWR RFout, 8 dB Bit & Max Attenuation

Ordering Information

AT65-0283TR Tape and Reel (1K Reel) AT65-0283-TB Units Mounted on Test Board 1.1 1.2 1.3 1.4 1.5 0 500 1000 1500 2000 Frequency (MHz) VSWR 1.1 1.2 1.3 1.4 1.5 0 500 1000 1500 2000 Frequency (MHz) VSWR 1.1 1.2 1.3 1.4 1.5 0 500 1000 1500 2000 Frequency (MHz) VSWR 1.2 1.4 1.6 0 500 1000 1500 2000 Frequency (MHz) VSWR RFin RFout