AT0402BRD07 YAGEO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

0.1% TO 1%, TC 25 TO TC50 sizes 0402/0603/0805/1206 RoHS compliant Product specification – December 11, 2015 V.3

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206 ORDERING INFORMATION - GLOBAL PART NUMBER Part number is identified by the serie s name , size, tolerance, packaging type , temper ature coefficient, t aping reel and resistance value. SCOPE This specification describes AT0402 to AT1206 high precision-high stability chip resistors with lead-free terminations made by thin film process.

APPLICATIONS

 Automotive electronics  Industrial and medical equipments  Test an d measuring equipments  Telecommunications

FEATURES

 AEC-Q200 qualified  Superior resistance against sulfur containing atmosphere  Moisture sensitivity level: MSL 1  Products with lead free terminations meet RoHS requirements  Reducing environmentally hazardous wastes  High component and equipment reliability  Non-forbidden materials used in products/production  Halogen free epoxy ORDERING EXAMPLE The ordering code of a AT0402 chip resistor, TC 25 value 56Ω with ± 0.5% tolerance, supplied in 7 -inch tape reel is: AT0402DRD0756RL. NOTE 1. All our Rchip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed. GLOBAL PART NUMBER A T XXXX X X X XX XXXXX L (1) SIZE 0402 / 0603 / 0805 / 1206 (2) TOLERANCE B = ±0.1% C = ±0.25% D = ±0.5% F = ±1% (3) PACKAGING TYPE R = Paper taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE D = 25 ppm/°C E = 50 ppm/°C (5) TAPING REEL 07 = 7 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point Example: 100R = 100Ω 1K = 1,000Ω (7) DEFAULT CODE Letter L is the system default code for ordering only. (NOTE)

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206 MARKING AT0402 No marking AT0603 E-96 series: including values 10/11/13/15/20/75 of E -24 series, 3 digits E-24 series: exception values 10/11/13/15/20/75 of E -24 series, one short bar under marking letter AT0805 / AT1206 Both E -24 and E -96 se ries: 4 digits First three digits for significant figure and 3rd digit for number of zeros NOTE For further marking information, please see special data sheet “ Chip resistors marking ” . Fig. 5 Value = 10 KΩ Fig. 1 CONSTRUCTION A metal film layer is deposited on a high grade ceramic body (aluminium oxide). This resistive layer is trimmed to its nominal value and on both ends a contact is made which will guarantee optimum solderability. This is achieved by applying several layers and for ease of soldering the outer layer consists of Ni/matte tin. The resistive layer is covered with a protective coating. Fig. 6 Chip resistor outlines OOUUTTLLIINNEESS Fig. 3 Value = 12.4 Ω Fig. 4 Value = 56 KΩ

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) Table 1 DIMENSIONS TYPE Operating Temperature Range Power Rating Max. Working Voltage Max. Overload Voltage Dielectric Withstanding Voltage Resistance Range (E-24/E-96 series)(Ω) & Tolerance AT0402 –55 °C to +155 °C 1/16W 50 V 100 V 100 V ±25 ±50 10~100K AT0603 1/10W 75V 150 V 100 V 10~330K AT0805 1/8W 150 V 300 V 300 V 10~1M AT1206 1/4W 200 V 400 V 500 V

ELECTRICAL CHARACTERISTICS

PRODUCT TYPE PATKING STYLE REEL DIMENSION QUANTITY PER REEL AT0402 Paper taping reel 7" (178 mm) 10,000 Units AT0603 Paper taping reel 7" (178 mm) 5,000 Units AT0805 Paper taping reel 7" (178 mm) 5,000 Units AT1206 Paper taping reel 7" (178 mm) 5,000 Units NOTE: for paper tape and reel specification/dimensions, please see the special data sheet “packing” document. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE PT040

100 MΩ TO 910 MΩ

100 mΩ to 910 mΩ ± 200 ppm/°C PT060 3 ± 200 ppm/°C PT080 5 ± 200 ppm/°C PT120 6 100 mΩ > 100 mΩ PT201 0 ± 100 ppm/°C ± 75 ppm/°C PT251 2 ± 100 ppm/°C ± 75 ppm/°C

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206 Fig. 10 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb) FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGG TTEEMMPPEERRAATTUURREE RRAANNGGEE Range: –55 °C to +155 °C PPOOWWEERR RRAATTIINNGG Each type rated power at 7 0 °C: AT0402=1/16 W AT0603 =1/10 W AT0805 =1/8 W AT1206 =1/4 W RATED VOLTAGE The DC or AT (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = )xR (P Or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (v) P=Rated power R=Resistance value (Ω)

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206 TEST TEST METHOD PROCEDURE REQUIREMENTS Short Time Overload IEC60115-1 4.13 2.5 times of rated voltage or maximum overload voltage, the less of the above, for 5 sec at room temperature ± (0.05%+0.05Ω) High Temperature Exposure AEC-Q200 Test 3 MIL-STD-202 Method 108 1,000 hours at Tamb = 125 °C, unpowered ± (0.1%+0.05Ω) 1,000 hours at Tamb = 155 °C, unpowered ± (0.3%+0.05Ω) Moisture Resistance AEC-Q200 Test 6 MIL-STD-202 Method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts ± (0.1%+0.05Ω) Biased Humidity AEC-Q200 Test 7 MIL-STD-202 Method 103 1,000 hours; 85 °C / 85% RH 10% of operating power Measurement at 24± 4 hours after test conclusion ± (0.1%+0.05Ω) Operational Life AEC-Q200 Test 8 MIL-STD-202 Method 108 1,000 hours at 70± 5 °C, RCWV applied for 1.5 hours on, 0.5 hour off, still air required ± (0.1%+0.05Ω) 1,000 hours at 125 °C, derated voltage applied for 1.5 hours on, 0.5 hour off, still air required ± (0.3%+0.05Ω) Resistance to Soldering Heat AEC-Q200 Test 15 MIL-STD-202 Method 210 Condition B, no pre-heat of samples Lead-free solder, 260± 5 °C, 10± 1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ± (0.05%+0.05Ω) Thermal Shock AEC-Q200 Test 16 MIL-STD-202 Method 107 -55/+125 °C Number of cycles is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ± (0.1%+0.05Ω) No visible damage Solderability - Wetting AEC-Q200 Test 18 J-STD-002 Electrical Test not required Magnification 50X SMD conditions: (a) Method B, aging 4 hours at 155 °C dry heat, dipping at 235± 3 °C for 5± 0.5 seconds. (b) Method B, steam aging 8 hours, dipping at 215± 3 °C for 5± 0.5 seconds. (c) Method D, steam aging 8 hours, dipping at 260± 3 °C for 7± 0.5 seconds Well tinned (>95% covered) No visible damage Table 4 Test condition, procedure and requirements TESTS AND REQUIREMENTS

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206 Board Flex / Bending AEC-Q200 Test 21 AEC-Q200-005 Chips mounted on a 90mm glass epoxy resin PCB (FR4) Bending for 0402: 5 mm 0603/0805: 3 mm 1206: 2mm Holding time: minimum 60 second ± (0.1%+0.05Ω) Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8 At +25/–55 °C and +25/+125°C Formula: R2–R1 T.C.R= )1t2t R1( R1-R2 × 106(ppm/°C) Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Refer to table 2 Flower of Sulfur ASTM-B-809-95 Sulfur (saturated vapor) 1000 hours, 90± 2°C, unpowered ± (0.1%+0.05Ω) ASTM-B-809-95* * Modified Sulfur 750 hours, 105°C, unpowered. ± (4.0%+0.05Ω)

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 3 Dec. 11, 2015 - - Modify Outline Version 2 May 11, 2015 - - Modify FOS test Version 1 Jun. 18, 2014 - - Modify FOS test Version 0 May 07, 2014 - - First issue of this specification

Chip Resistor Surface Mount www.yageo.com Dec. 11, 2015 V3 Product specification SERIES AT 0402 to 1206 LEGAL DISCLAIMER Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any pr oduct related information, including but not limited to product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or improvements to product related information at any time and without notice. Yageo makes no r epresentation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infring ement and merchantability. Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s knowledge of typical operating conditions for such types of applications in a generic nature. Such statements are nei ther binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a specific customer application or use. They are intended for use only by customers with requisite knowledge and experience for determining whether Yage o products are the correct products for their application or use. In addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or use of Yageo products which requires higher degree of reliability or saf ety, shall employ additional protective safeguard measures to ensure that product failure would not result in personal injury or property damage. Yageo products are not designed for application or use in medical, life -saving, or life -sustaining devices o r for any other application or use in which the failure of Yageo products could result in personal injury or death. Customers using or selling Yageo products not expressly indicated for above -mentioned purposes shall do so at their own risk and agree to fu lly indemnify Yageo and hold Yageo harmless. Information provided here is intend ed to indicate product specifications only. Yageo reserves all the rights for revising this content without further notification, as long as products are unchanged. Any produc t change will be announced by PCN.