AT06-2S-LED1224VX-OMC ASS | Alldatasheet

Document overview

  • PDF pages: 1

Technical content

NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL: HOUSING: NATURAL POLYCARBONATE SEAL: SILICONE RUBBER 2. MODIFICATIONS: LIGHT EMITTING DIODE (GREEN), REVERSE VOLTAGE PROTECTION CIRCUIT (RVPC), OVERMOLD-COMPATIBLE. 3. CONNECTOR SPECIFICATIONS:

3.1 CURRENT RATING: 13 AMPS

3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2

MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.3 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C.

3.4 MOISTURE RESISTANCE:

IP68 ( IM OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION ) IP69K ( MATED CONDITION )

3.5 MATING CYCLE DURABILITY: 100 CYCLES

3.6 ROHS COMPLIANT

3.7 OPERATING TEMPERATURE: -40°C TO +85°C

  1. LED SPECI FICATIONS:

4.1 FORWARD CURRENT: 30 MILLIAMPS TYPICAL;

4.2 REVERSE CURRENT: 50 MICROAMPS MAXIMUM

4.3 POWER DISSIPATION: 120 MILLIWATTS MAXIMUM

4.4 FORWARD VOLTAGE: 4 VOLTS MAXIMUM

4.5 REVERSE VOLTAGE: 5 VOLTS MAXIMUM

  1. RESISTOR SPECIFICATIONS:

5.1 RESISTANCE VALUE: 680 OHMS;

5.2 POWER RATING: 18 WATTS

5.3 MAX.WORKING VOLTAGE: 150 VOLTS 6. RECTI FIER DIODE SPECIFICATIONS:

6.1 PEAK REVERSE VALUE: 1000 VOLTS;

6.2 FORWARD VOLTAGE: <1.1V @ I = 1A 7. M ATING PART: AT04-2P* RECEPTACLE ( * = MODIFICATIONS AND COLORS ) ALL DIMENSIONS ARE FOR REFERENCE USE ONLY.

9 CONTACT SIZE AND REAR SEAL WIRE RANGE:

REDUCED DIAMETER SEAL: CONTACT SIZE MIN. INSUL O.D. TYPICAL WIRE RANGE MAX. INSUL O.D. 16 2.24 mm (.088 in) 14 - 20 AWG (2.0-0.5mm²) 3.68 mm (.145 in) REQUIRES BLACK CONTACT RETENTION WEDGE: AW2S-LED ( SOLD SEPARATELY ) LED CONNECTOR DIAGRAM CONNECTOR BODY - CLEAR OF:SH:REV:DWG NO:TITLE: REV DESCRIPTION DATE REVISIONS ECO APPRBY 11A1AT06-2S-LED1224VX-OMCSTRUCTURE+ AT SERIES,2-POS,PLUG,LED,12V OR 24V,CLEAR BODY,RVP CIRCUIT SEE PART NUMBER CHART

44724 Morley Drive

Clinton Township, MI 48036 Sine Systems - www.amphenol-sine.com Amphenol MATERIALS LIST SIZE PROCESS SPECIFICATIONS: MATERIAL SPECIFICATIONS: UNLESS OTHERWISE SPECIFIED 3 PL DEC ±0.08 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 2 PL DEC ±0.15 QUANTITY SIGNATURES Fractions ±1/64 Angles ±1° APPROVAL: ENGINEER: CHECKED: DRAWN: SCALE: DATE PART NUMBER REVISIONDWG NO: TYPE SHEET OF ITEMDESCRIPTION THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL MANUFACTURING VARIATIONS. CUSTOMER: NEXT ASS'Y: X3) Note reference = STRUCTURE+ AT SERIES, 2-POS, PLUG, LED, 12V OR 24V, CLEAR BODY, RVP CIRCUIT B AT06-2S-LED1224VX-OMC A1 MILO.DONG 06JUN22 SULLEN.ZHANG 07JUN22 TOMMY.XIE 08JUN22 NONE RELEASE DRAWING 06JUN22 MILOA1 - TOMMY PART NUMBER CHART AT06-2S-LED1224V-OMC PART NUMBER AT06-2S-LED1224VR-OMC STANDARD SEAL REDUCED DIAMETER STANDARD SEAL: CONTACT SIZE MIN. INSUL O.D. TYPICAL WIRE RANGE MAX. INSUL O.D. 16 1.35 mm (.053 in) 14 - 20 AWG (2.0-0.5mm²) 3.05 mm (.120 in) 13.8 LASER ENGRAVE POLARITY, CONTACT NUMBER, SEAL TYPE, SPECIAL CIRCUIT TYPE (RVPC), AND LED COLOR CODE AS SHOWN IN THIS AREA. 18.7 43.7 SEE PART NUMBER CHART BELOW. XX = SEAL CODE. RD IF REDUCED DIA., BLANK IF STANDARD SEAL. -+ 2 1 RVPC GRN XX GREEN LED -24VDC AND -12VDC +24VDC AND +12VDC RESISTOR (3X) RECTIFIER DIODE SMD RECTIFIER DIODE: 1000V, 1A, S1M SMD LED: KPA-1606ZGC-G RESISTOR: TYPE 0805, R680Ω, 1/8W COMPONENT TYPES: R R R WEIGHT:5.55g