ASX00031 ARDUINO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
Arduino® Portenta Breakout Board 1 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Product Reference Manual SKU: ASX00031
Description
The Arduino® Portenta Breakout board is designed to assist developers with their prototypes by exposing the high- density connectors of the Portenta family on both sides of the breakout carrier, providing total flexibility for measuring and controlling signals - developing your own hardware, testing the design and measuring the input and output signals out of the high-density connectors. Target areas: Prototyping
Arduino® Portenta Breakout Board 2 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024
Features
RJ45 Ethernet up to 1Gb/s; speed depending on installed board Micro SD card MIPI 20T JTAG with trace capability Power CR2032 RTC Lithium Battery backup External power terminal block I/O Break out all Portenta high-density connector signals (see pinout table below) Male/female HD connectors allow interposing breakout between Portenta and shield to debug signals Compatibility Standard Portenta high-density connector pinout Safety information Class A
Arduino® Portenta Breakout Board 3 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024
Contents
1 The Board
1.1 Application Examples
1.2 Accessories (Not Included)
1.3 Related Products
1.4 Solution Overview
2 Ratings
2.1 Absolute Maximum Ratings
2.2 Recommended Operating Conditions
3 Functional Overview
3.1 Board Topology
3.2 DIP Switch
3.3 RJ-45 Connector
4 Board Operation
4.1 Getting Started - IDE
4.2 Getting Started - Arduino Cloud Editor
4.3 Getting Started - Arduino Cloud
4.4 Sample Sketches
4.5 Online Resources
4.6 Board Recovery
5 Connector Pinouts
5.1 GPIO
5.2 I2C
5.3 CAN0/CAN1
5.4 ANALOG/PWM
5.5 Display
5.6 UART1/UART0
5.7 SPI1/SPI0
5.8 PCIe
5.9 UART3/UART2
5.10 I2S/SAI
5.11 CAMERA: DCMI/CSI
5.12 PDM/SPDIF
5.13 J8 Power IN
Arduino® Portenta Breakout Board 4 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024
6 Mechanical Information
6.1 Board Outline
7 Certifications
7.1 Declaration of Conformity CE DoC (EU)
7.2 Declaration of Conformity to EU RoHS & REACH 211 01/19/2021
7.3 Conflict Minerals Declaration
8 Company Information
9 Reference Documentation
10 Change Log
Arduino® Portenta Breakout Board 5 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 This product is designed to work alongside the Portenta family. Please check the Getting Started guide of your Portenta board. Product Development: The Portenta Breakout board reduces development time for industrial-grade solution automation based on the Portenta line. Technical Education: The Portenta Breakout board can act as a first point of entry for technician education in industrial-grade control and embedded systems. 8-, 10-, 12- and 22-pin headers/connectors with 2.54 mm pitch 20 pin JTAG programmer Arduino Portenta H7 (SKU: ABX00042) Arduino Portenta H7 Lite (SKU: ABX00045) Arduino Portenta H7 Lite Connected (SKU: ABX00046) Arduino Portenta X8 (SKU: ABX00049)
Arduino® Portenta Breakout Board 6 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Example of a typical installation for a solution including Portenta H7. A Portenta board must be connected for operation of the Portenta Breakout Board. Symbol Description Min Typ Max Unit TMax Maximum thermal limit -40 20 85 °C 5VMax Maximum input voltage from 5V input 4.0 5 5.5 V PMax Maximum Power Consumption - - 5000 mW Symbol Description Min Typ Max Unit T Conservative thermal limits -15 20 60 °C 5V Input voltage from 5V input 4.8 5 5.2 V Ref. Description Ref. Description J1 DF40HC(3.5)-80DS-0.4V(51) High Density connectorJ5 Micro SD card J2 DF40HC(3.5)-80DS-0.4V(51) High Density connectorJ6 20 mm coin battery retainer
Arduino® Portenta Breakout Board 7 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Ref. Description Ref. Description J3 USB type A connector J7 Ethernet adaptor J4 Cam connector J8 Power terminal block SW1 Boot mode selection PB1 Power ON button U1 USBA power switch IC Back view Bottom view - connectors Ref. Description Ref. Description J15 DF40C-80DP-0.4V(51) High Density connectorJ16 DF40C-80DP-0.4V(51) High Density connector The DIP switch allows for boot mode configuration: BOOT SEL: When set to ON, keeps the Portenta in Boot mode. BOOT: When set to ON enables the embedded bootloader. Firmware can be uploaded via the USB port on the breakout board (DFU). USB-A to USB-A (non-crossover) cable required. The Portenta H7 has to be powered through the USB-C® connector or VIN.
Arduino® Portenta Breakout Board 8 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 The RJ-45 Connector allows to plug in an ethernet cable and connect to your network. By default it is compatible with the Arduino Portenta H7 as the jumper pads are joint with copper. To allow compatibility with the Arduino Portenta X8 it is needed to cut 2 jumper pads, located on top of the the RJ- 45 Connector, below the SD holder, on the left side of the Carrier as shown in the following picture. Ethernet Jumper pads Note: This board is intended to operate together with Portenta H7 (see section 1.4 Solution Overview). If you want to program your Portenta H7 with the Breakout Board while offline you need to install the Arduino Desktop IDE [1]. To connect your Portenta H7 with the Portenta Breakout Board to your computer, you will need a Type-C USB cable. This also provides power to both the Portenta H7 as well as the Portenta Breakout Board. Alternatively, in order to provide power to the USB connectors and the 5V pins, a 5V source must be applied to J8. This will also provide power to the Portenta H7.
Arduino® Portenta Breakout Board 9 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 All Arduino boards, including this one, work out-of-the-box on the Arduino Cloud Editor [2], by just installing a simple plugin. The Arduino Cloud Editor is hosted online, therefore it will always be up-to-date with the latest features and support for all boards. Follow [3] to start coding on the browser and upload your sketches onto your board. All Arduino IoT-enabled products are supported on Arduino Cloud which allows you to log, graph and analyze sensor data, trigger events, and automate your home or business. Sample sketches can be found either in the “Examples” menu in the Arduino IDE or in the “Documentation” section of the Arduino Pro website [4] Now that you have gone through the basics of what you can do with the board you can explore the endless possibilities it provides by checking exciting projects on ProjectHub [5], the Arduino Library Reference [6] and the online store [7] where you will be able to complement your board with sensors, actuators and more In case a sketch locks up the processor and the board is not reachable anymore via USB it is possible to enter bootloader mode by double-tapping the reset button right after powering it up. The Portenta Breakout Board provides easy access to the pins on the high-density connector of the Portenta family. The Portenta Breakout Board is shipped in a headerless configuration to provide flexibility in using 2.54mm compatible connectors to meet their specific application.
Arduino® Portenta Breakout Board 10 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Pinouts In cases where multiple channels are on a single header, the first channel is on the bottom part of the header and the section channel is on the top part of the header. The order of the channel is determined by the silkscreen markings.
Arduino® Portenta Breakout Board 11 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Pin Function Type Description 1 3V3 Power +3.3V power rail
2 GPIO 0 Digital GPIO 0
3 GPIO 1 Digital GPIO 1
4 GPIO 2 Digital GPIO 2
5 GPIO 3 Digital GPIO 3
6 GPIO 4 Digital GPIO 4
7 GPIO 5 Digital GPIO 5
8 GPIO 6 Digital GPIO 6
9 GND Power Ground
10 GND Power Ground
Pin Function Type Description 1 3V3 Power +3.3V power rail
2 GND Power Ground
3 SDA1 Digital Serial Data Line 1
4 SCL1 Digital Serial Clock Line 1
5 3v3 Power +3.3V power rail
6 GND Power Ground
7 SDA0 Digital Serial Data Line 0
8 SCL0 Digital Serial Clock Line 0
9 3V3 Power +3.3V power rail
11 SDA2 Digital Serial Data Line 2
12 SCL2 Digital Serial Clock Line 2
Arduino® Portenta Breakout Board 12 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Pins closer to the edge of the board are CAN0. Pins close to the center are CAN1. Please Note When used with Arduino Portenta H7, only CAN1 is available. Pin Function Type Description 1 5V Power +5.0V power rail
2 TX Differential CAN Bus Transmission Line
3 RX Differential CAN Bus Receive Line
4 GND Power Ground
Pin Function Type Description
1 A0 Analog Analog Input 0
2 A1 Analog Analog Input 1
3 A2 Analog Analog Input 2
4 A3 Analog Analog Input 3
5 A4 Analog Analog Input 4
6 A5 Analog Analog Input 5
7 A6 Analog Analog Input 6
8 A7 Analog Analog Input 7
9 REFP Analog Analog Reference Positive
10 REFN Analog Analog Reference Negative
11 GND Analog Ground
1 PWM0 Digital PWM output 0
2 PWM1 Digital PWM output 1
3 PWM2 Digital PWM output 2
4 PWM3 Digital PWM output 3
5 PWM4 Digital PWM output 4
6 PWM5 Digital PWM output 5
7 PWM6 Digital PWM output 6
8 PWM7 Digital PWM output 7
9 PWM8 Digital PWM output 8
10 PWM9 Digital PWM output 9
11 GND Digital Ground
Arduino® Portenta Breakout Board 13 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Pin Function Type Description
1 D3P Differential Differential DSI Data Line 3 Positive
2 D2P Differential Differential DSI Data Line 2 Positive
3 D1P Differential Differential DSI Data Line 1 Positive
4 D0P Differential Differential DSI Data Line 0 Positive
5 CLKP Differential Differential DSI Clock Positive
7 D3N Differential Differential DSI Data Line 3 Negative
8 D2N Differential Differential DSI Data Line 2 Negative
9 D1N Differential Differential DSI Data Line 1 Negative
10 D0N Differential Differential DSI Data Line 0 Negative
11 CLKN Differential Differential DSI Clock Negative
12 GND Power Ground
Pins closer to the edge of the board are UART1. Pins closer to the center are UART0. Pin Function Type Description 1 3V3 Power +3.3 V power rail
2 TX Digital UART Transmission Signal
3 RX Digital UART Receive Signal
4 RTS Digital Request to send
5 CTS Digital Clear to send
Pins closer to the edge of the board are SPI0. Pins closer to the center are SPI1. Pin Function Type Description 1 3V3 Power +3.3 V power rail
2 CS Digital Chip Select
3 CK Digital Serial Clock
4 MISO Digital Main In Secondary Out
5 MOSI Digital Main Out Secondary In
Arduino® Portenta Breakout Board 14 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Pin Function Type Description
1 TXN Differential Differential PCIe Transmission Line Negative
2 RXN Differential Differential PCIe Receive Line Negative
3 CKN Differential Differential PCIe Clock Line Negative
1 TXP Differential Differential PCIe Transmission Line Positive
2 RXP Differential Differential PCIe Receive Line Positive
3 CKP Differential Differential PCIe Clock Line Positive
4 RST Digital Reset Signal
Pins closer to the edge of the board are UART2. Pins closer to the center are UART3. Pin Function Type Description 1 3V3 Power +3.3 V power rail Pin Function Type Description 1 3V3 Power +3.3 V power rail
2 CK Digital I2S Clock
3 WS Digital I2S Word Select
4 SD1 Digital I2S Right Channel
5 SD0 Digital I2S Left Channel
1 3V3 Power +3.3 V power rail
2 SCK Digital SAI Clock
3 FS Digital SAI Frame Synchronization
4 D0 Digital SAI Data Line 0
5 D1 Digital SAI Data Line 1
Arduino® Portenta Breakout Board 15 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Pin Function Type Description
1 GND Power Ground
2 HS Digital DCMI HSYNC
3 CKN Digita DCMI_CLK / CSI CKN
4 CKP Digital DCMI VSYNC / CSI CKP
5 D3N Digital DCMI D6 / CSI D3P
6 D3P Digital DCMI D7 / CSI D3P
7 D2N Digital DCMI D4 / CSI D2N
8 D2P Digital DCMI D5 / CSI D2P
9 D1N Digital DCMI D2 / CSI D1N
10 D1P Digital DCMI D3 / CSI D1P
11 D0N Digital DCMI D0 / CSI D0N
12 D0P Digital DCMI D1 / CSI D0P
Pin Function Type Description
1 CK Digital PDM Clock
2 D0 Digital PDM Data Line 0
3 D1 Digital PDM Data Line 1
1 TX Digital SPDIF Transmission Signal
2 RX Digital SPDIF Receive Signal
3 GND Power Ground
Pin FunctionType Description 1 5V Power Supplies power to the CAN bus directly. VIN for the Portenta board and also provides the VUSB voltage through the NCP383
Arduino® Portenta Breakout Board 16 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Board outline and screw holes
7 Certifications
We declare under our sole responsibility that the products above are in conformity with the essential requirements of the following EU Directives and therefore qualify for free movement within markets comprising the European Union (EU) and European Economic Area (EEA).
Arduino® Portenta Breakout Board 17 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Arduino boards are in compliance with RoHS 2 Directive 2011/65/EU of the European Parliament and RoHS 3 Directive 2015/863/EU of the Council of 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Substance Maximum Limit (ppm) Lead (Pb) 1000 Cadmium (Cd) 100 Mercury (Hg) 1000 Hexavalent Chromium (Cr6+) 1000 Poly Brominated Biphenyls (PBB) 1000 Poly Brominated Diphenyl ethers (PBDE) 1000 Bis(2-Ethylhexyl} phthalate (DEHP) 1000 Benzyl butyl phthalate (BBP) 1000 Dibutyl phthalate (DBP) 1000 Diisobutyl phthalate (DIBP) 1000 Exemptions : No exemptions are claimed. Arduino Boards are fully compliant with the related requirements of European Union Regulation (EC) 1907 /2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). We declare none of the SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), the Candidate List of Substances of Very High Concern for authorization currently released by ECHA, is present in all products (and also package) in quantities totaling in a concentration equal or above 0.1%. To the best of our knowledge, we also declare that our products do not contain any of the substances listed on the "Authorization List" (Annex XIV of the REACH regulations) and Substances of Very High Concern (SVHC) in any significant amounts as specified by the Annex XVII of Candidate list published by ECHA (European Chemical Agency) 1907 /2006/EC.
7.3 Conflict Minerals Declaration
As a global supplier of electronic and electrical components, Arduino is aware of our obligations with regards to laws and regulations regarding Conflict Minerals, specifically the Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. Arduino does not directly source or process conflict minerals such as Tin, Tantalum, Tungsten, or Gold. Conflict minerals are contained in our products in the form of solder, or as a component in metal alloys. As part of our reasonable due diligence Arduino has contacted component suppliers within our supply chain to verify their continued compliance with the regulations. Based on the information received thus far we declare that our products contain Conflict Minerals sourced from conflict-free areas.F
Arduino® Portenta Breakout Board 18 / 18 Arduino® Portenta Breakout Board Modified: 15/11/2024 Company name Arduino S.r.l. Company Address Via Andrea Appiani, 25 - 20900 MONZA (Italy) (Desktop) https://www.arduino.cc/en/Main/Software Arduino IDE (Cloud)https://create.arduino.cc/editor Cloud IDE Getting Started https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web- editor-4b3e4a Arduino Pro Websitehttps://www.arduino.cc/pro Project Hub https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending Library Reference https://www.arduino.cc/reference/en/ Online Store https://store.arduino.cc/ 03/09/2024 5 Cloud Editor updated from Web Editor 05/12/2023 4 Accessories section updated and small fixes 23/08/2022 3 Add RJ-45 jumpers information 14/12/2021 2 Clarified Camera compatibility 05/05/2021 1 First Release