ASSR-4111

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

Features

 Compact solid-state bidirectional signal switch  Single and dual channel normally-off Single-Pole- Single-Throw (SPST) relay  400V output withstand voltage  0.12A or 0.24A current rating (See schematic for ASSR-4111 connections A and B.)  Low input current: CMOS compatibility  Low on-resistance: – 5.5Ω typical for DC-only – 8Ω typical for AC/DC  High speed switching: – 0.1 ms (T ON), 0.02 ms (TOFF) typical  High transient immunity: >1 kV/μs  High input-to-output insulation voltage (safety and regulatory approvals) – 3750 Vrms for 1 min per UL1577 – CSA component acceptance

Applications

 Telecommunication switching  Data communications  Industrial controls  Medical  Security  EMR/Reed Relay replacement ASSR-4110, ASSR-4111, ASSR-4120 General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω)

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Functional Diagram Truth Table Opto-isolation Turn-off Circuit Single Channel, SPST Relay,

1 Form A in 4-Pin SO Package

Ordering Information

ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5. To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ASSR-4111-501E to order product of 300-mil DIP-6 Gull Wing Surface Mount package in Tape and Reel packaging and RoHS Compliant. Example 2: ASSR-4120-002E to order product of 300-mil DIP-8 package in tube packaging and RoHS Compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Part Number Option Package Surface Mount Gull Wing Tape & Reel QuantityRoHS Compliant ASSR-4110 -003E SO-4 X 10 0 units per tube -503E X X 1500 units per reel ASSR-4111 -001E 300-mil DIP-6 50 units per tube -301E X X 50 units per tube -501E X X X 1000 units per reel ASSR-4120 -002E 300-mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Schematic ASSR-4110 ASSR-4111 Connection A ASSR-4111 Connection B Turn-off Circuit Opto-isolation Turn-off Circuit Equivalent Relay Diagram Opto-isolation Opto -isolation Turn -off Circuit 3 4 Opto -isolation Equivalent Relay DiagramVo Opto -isolation Turn -off Circuit 3 4 Opto -isolation Equivalent Relay DiagramVo Opto -isolation Turn -off Circuit Opto -isolation 4 and 6 Equivalent Relay Diagram Vo

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) ASSR-4120 Package Outline Drawings ASSR-4110 4-Pin Small Outline Package Opto-isolation Equivalent Opto-isolation Circuit Relay Diagram Turn-off Circuit Turn-off xxxx YWW LAND PATTERN RECOMMENDATION2.54 (0.100) 0.80 (0.031) 4.80 (0.189) 1.20 (0.047) 2.540 (0.10)0.41 (0.016) 0.375 (0.015) 4.40±0.20 (0.173±0.008) 4.3±0.2 (0.169±0.008) 6.8±0.4 (0.268±0.016) LEAD FREE TYPE NUMBER DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES) OPTION NUMBER 500 AND UL RECOGNITION NOT MARKED 0.20 (0.008) 0.5 (0.02) 0.46 (0.018) 0.5 (0.02) 0.102±0.102 (0.004±0.004) 2.0±0.2 (0.079±0.009)

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) ASSR-4111 6-Pin DIP Package ASSR-4111 6-Pin DIP Package with Gull Wing Surface Mount Option 300 9.40 (0.370) 9.90 (0.390) PIN ONE DOT A XXXX YYWW TYPE NUMBER DATE CODE 2.16 (0.085) 2.80 (0.110) (0.020) (0.040) 0.45 (0.018) 0.65 (0.025) 4.70 (0.185) MAX. 2.66 (0.105) MIN. 6.10 (0.240) 6.60 (0.260) 0.20 (0.008) 0.33 (0.013) 5° TYP. 7.36 (0.290) 7.88 (0.310) DIMENSIONS IN MILLIMETERS AND (INCHES). 321 1.78 (0.070) MAX. RU UL RECOGNITION LEAD FREE 4.19 (0.165) 2.29 (0.090) 2.54 (0.100) TYP. 0.635 ± 0.130 (0.025 ± 0.005) 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. 0.20 (0.008) 0.30 (0.013) 1.78 (0.070) MAX. 9.65 ± 0.25 (0.380 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 1.27 (0.050) 10.9 (0.430) MAX. 2.0 (0.080) NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. LAND PATTERN RECOMMENDATION

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) ASSR-4120 8-Pin DIP Package 1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.92 (0.115) MIN. 5qTYP. 0.254 + 0.076 - 0.051 (0.010+ 0.003) - 0.002) 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 9.65 ± 0.25 (0.380 ± 0.010) A XXXX YYWW DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES). 5678 4321 OPTION CODE* UL RECOGNITION UR TYPE NUMBER OPTION NUMBERS 300 AND 500 NOT MARKED. 3.56 ± 0.13 (0.140 ± 0.005) LEAD FREE

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) ASSR-4120 8-Pin DIP Package with Gull Wing Surface Mount Option 300 0.635 ± 0.25 (0.025 ± 0.010) 12qNOM. 9.65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 9.65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.780 (0.070) MAX.1.19 (0.047) MAX. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002)

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Lead Free IR Profile Non-halide flux should be used. Regulatory Information The ASSR-4110, ASSR-4111, and ASSR-4120 are approved by the following organizations: UL Approved under UL 1577, component recognition program up to VISO = 3750 Vrms. CSA Approved under CSA Component Acceptance Notice #5. Insulation and Safety Related Specifications Parameter Symbol ASSR-4110 ASSR-4111 ASSR-4120 Unit Conditions Minimum External Air Gap (Clearance) L(101) 4.9 7.1 mm Measured from input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 4.9 7.4 mm Measured from input terminals to output terminals, shortest distance path along body. Minimum Internal Plastic Gap (Internal Clearance) 0.08 0.08 mm Through insulati on distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. Tracking Resistance (Comparative Tracking Index) CTI 175 175 V DIN IEC 112/VDE 0303 Part 1. Isolation Group (DIN VDE0109) IIIa IIIa Material Group (DIN VDE 0109). 217qC RAMP-DOWN 6qC/SEC. MAX. RAMP-UP 3qC/SEC. MAX. 150 - 200qC 260 +0/-5qC t 25qC to PEAK 60 to 150 SEC. 20-40 SEC. TIME WITHIN 5qC of ACTUAL PEAK TEMPERATUREtp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME (SECONDS) TEMPERATURE (qC) NOTES: THE TIME FROM 25qC to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200qC, Tsmin = 150qC

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Absolute Maximum Ratings Recommended Operating Conditions Parameter Symbol Min. Max. Unit Note Storage Temperature T S –55 125 °C Operating Temperature T A –40 85 °C Junction Temperature T J —1 2 5 °C Lead Soldering Cycle Temperature — 260 °C Time — 10 s Input Current Average I F —2 5 m A Surge — 50 Transient — 1000 Reversed Input Voltage V R —5V Input Power Dissipation ASSR-4110 P IN —4 0 m W ASSR-4111 P IN —4 0 m W ASSR-4120 P IN 80 mW Output Power Dissipation ASSR-4110 P O —3 6 0 m W ASSR-4111 P O —4 9 0 m W ASSR-4120 P O 720 mW Average Output Current (TA = 25°C, TC ≤ 100°C) IO —0 . 1 2A a a. For derating, refer to Figure 1, Figure 2, Figure 3, and Figure 4. ASSR-4111 Connection B —0 . 2 4A Output Voltage (TA = 25°C) V O –400 400 V b b. The voltage across the output terminals of the relay should not exceed this rated withstand voltage. Overvoltage protection circuits should be added in some applications to protect against overvoltage transients. ASSR-4111 Connection B 04 0 0V b Solder Reflow Temperature Profile See Lead Free IR Profile. Parameter Symbol Min. Max. Unit Note Input Current (ON) I F(ON) 32 0 m A a a. Threshold to switch device is IF ≥ 0.5 mA; however, for qualified device performance over temperature range, it is recommended to operate at IF = 5 mA. Input Voltage (OFF) V F(OFF) 00 . 8V Operating Temperature T A –40 +85 °C

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Package Characteristics Unless otherwise specified, TA = 25°C. Electrical Specifications (DC) Over recommended operating TA = –40°C to 85°C, IF = 5 mA to 10 mA, unless otherwise specified. Parameter Sym. Min. Typ. Max. Unit Conditions Note Input-Output Momentary Withstand Voltage VISO 3750 — — Vrms RH ≤ 50%, t = 1 min. a, b a. Device is considered a two-terminal device: ASSR-4110 — pin 1, 2 short ed and pin 3, 4 shorted. ASSR-4111 — pin 1, 2, 3 shorted and pin 4, 5, 6 shorted. ASSR-4120 — pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted. b. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For the continuous voltage rating, refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your equipment level safety specification, or Broadcom Application Note 1074, Optocoupler Input-Output Endurance Voltage. Input-Output Resistance R I-O — 1012 —Ω V I-O = 500 Vdc Input-Output Capacitance a ASSR-4110 C I-O — 0.4 — pF f = 1 MHz; V I-O = 0 Vdc ASSR-4111 C I-O — 0.5 — pF f = 1 MHz; V I-O = 0 Vdc ASSR-4120 C I-O — 0.8 — pF f = 1 MHz; V I-O = 0 Vdc Parameter Sym. Min. Typ. Max. Unit Conditions Figure Note Output Withstand Voltage |VO(OFF)|4 0 0 4 5 0— V V F = 0.8V, IO = 250 μA, TA = 25°C 360 — — V V F = 0.8V, IO = 250 μA 5 Output Leakage Current I O(OFF) —0 . 5 1 0 0 n A V F = 0.8V, VO = 400V, TA = 25°C —— 1μ A V F = 0.8V, VO = 400V 6 Output Offset Voltage |V (OS)|— 1 — μ V I F = 5 mA, IO = 0 mA Input Reverse Breakdown Voltage VR 5— —V I R = 10 μA Input Forward Voltage V F 1.1 1.3 1.65 V I F = 5 mA 7, 8 Output On-Resistance R (ON) —1 62 5Ω I F = 5 mA, IO = 120 mA, Pulse ≤ 30 ms, TA = 25°C 9, 10 a a. During the pulsed R(ON) measurement (IO duration ≤ 30 ms), ambient (TA) and case temperature (TC) are equal. ASSR-4111 Connection B R(ON) —5 . 5 8 . 5Ω I F = 5 mA, IO = 240 mA, Pulse ≤ 30 ms, TA = 25°C a

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Figure 16: Switching Test Circuit for tON, tOFF INPUT IF OUTPUT Vo 10% tON PULSE GEN. Zo = 50 : tf = tr = 5ns INPUT MONITORING NODE OUTPUT Vo MONITORING NODE IF C L * R L ( *C L IS APPROXIMATELY 25pF WHICH INCLUDES PROBE AND STRAY WIRING CAPACITANCE) V DD R 200ohm tOFF 90% 50%50% P.W. = 15 ms ASSR-4120

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Figure 17: Output Transient Rejection Test Circuit PULSE GEN. Zo = 50 : ASSR-4120 OUTPUT Vo MONITORING NODE C M R M C M INCLUDES PROBE AND FIXTURE CAPACITANCE R M INCLUDES PROBE AND FIXTURE RESISTANCE V PEAK tR V PEAK 90% 10% tF 90% 10% INPUT OPEN V M (MAX) < 4V F PEAK R PEAK t OR tdt dV (0.8)V0 OVERSHOOT ON VPEAK IS TO BE < 10%_ (0.8)V

ASSR-4110, ASSR-4111, ASSR-4120 Data Sheet General-Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25Ω) Figure 18: Input-Output Transient Rejection Test Circuit IF PULSE GEN. Zo = 50 : V FF A B SWITCH AT POSITION "B": IF = 5 mA ASSR-4120 OUTPUT Vo MONITORING NODE CL* RL = 1 k o h m ( *C L IS APPROXIMATELY 25pF WHICH INCLUDES PROBE AND STRAY WIRING CAPACITANCE) V DD = 5V V I-O tR V I-O(PEAK) 90% 10% tF 90% 10% SWITCH AT POSITION "A": IF = 0 mA V O(OFF) (min.) > 4V V O(OFF) V O(ON) V O(ON) (max.) < 0.8V

Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries and/or the EU. Copyright © 2012–2017 by Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.