ASSR-1530

ASSR-1510 BOARDCOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 17

Technical content

Features

 Compact solid-state bidirectional signal switch  Single and dual channel normally-off Single-Pole- Single-Throw (SPST) relay  60V output withstand voltage  1.0A or 2.0A current rating (See schematic for ASSR- 1511 connections A and B.)  Low input current: CMOS compatibility  Low on-resistance: 0.12Ω typical for DC-only, 0.35Ω typical for AC/DC  High speed switching: 0.25 ms (Ton), 0.02 ms (Toff) typical  High transient immunity: >1 kV/μs  High input-to-output insulation voltage (safety and regulatory approvals) – 3750 Vrms for 1 min per UL1577 – CSA component acceptance

Applications

 Industrial controls  Factory automation  Data acquisition system  Measuring instrument  Medical system  Security system  EMR/Reed Relay replacement ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω)

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Functional Diagram Truth Table Opto-isolation Turn-off Circuit Single Channel, SPST Relay,

1 Form A in 4-Pin SO Package

Ordering Information

ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5. To order see attached table, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ASSR-1511-501E to order product of 300-mil DIP-6 Gull Wing Surface Mount package in Tape and Reel packaging and RoHS Compliant. Example 2: ASSR-1520-002E to order product of 300-mil DIP-8 package in tube packaging and RoHS Compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Part Number Option Package Surface Mount Gull Wing Tape & Reel QuantityRoHS Compliant ASSR-1510 -003E SO-4 X 10 0 units per tube -503E X X 1500 units per reel ASSR-1511 -001E 300 mil DIP-6 50 units per tube -301E X X 50 units per tube -501E X X X 1000 units per reel ASSR-1520 -002E 300 mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel ASSR-1530 -005E SO-8 X 50 units per tube -505E X X 1000 units per reel

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Schematic ASSR-1510 ASSR-1511 Connection A ASSR-1511 Connection B Opto-isolation Equivalent Relay Diagram Opto-isolation Circuit Turn-o Opto-isolation 3 4 Opto-isolation Equivalent Relay DiagramVo Circuit Turn-o 4 and 6 Vo Circuit Turn-o Opto-isolation Opto-isolation Equivalent Relay Diagram

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) ASSR-1520 and ASSR-1530 Package Outline Drawings ASSR-1510 4-Pin Small Outline Package Opto-isolation Equivalent Opto-isolation Circuit Relay Diagram Turn-o Circuit Turn-o DIMENSIONS IN MILLIMETERS AND (INCHES) OPTION NUMBER 500 AND UL RECOGNITION NOT MARKED TYPE NUMBER DATE CODE LEAD FREE xxxx LAND PATTERN RECOMMENDATION YWW 2.54 (0.100) 6.8 ± 0.016 (0.268 ± 0.016) 4.40 ± 0.20 (0.173 ± 0.008 ) 4.3 ± 0.2 (0.169 ± 0.008 ) 0.375 (0.015) 0.41 (0.016) 0.20 (0.008) 0.5 (0.02) 2.0 ± 0.2 (0.079 ± 0.009 ) 0.102 ± 0.102 (0.004 ± 0.004 ) 0.5 (0.02) 0.46 (0.018) 4.80 (0.189) 2.540 (0.10) 0.80 (0.031) 1.20 (0.047)

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) ASSR-1511 6-Pin DIP Package ASSR-1511 6-Pin DIP Package with Gull Wing Surface Mount Option 300 9.40 (0.370) 9.90 (0.390) PIN ONE DOT A XXXX YYWW TYPE NUMBER DATE CODE 2.16 (0.085) 2.80 (0.110) (0.020) (0.040) 0.45 (0.018) 0.65 (0.025) 4.70 (0.185) MAX. 2.66 (0.105) MIN. 6.10 (0.240) 6.60 (0.260) 0.20 (0.008) 0.33 (0.013) 5 ° TYP. 7.36 (0.290) 7.88 (0.310) DIMENSIONS IN MILLIMETERS AND (INCHES). 321 1.78 (0.070) MAX. RU UL RECOGNITION LEAD FREE 4.19 (0.165) 2.29 (0.090) 2.54 (0.100) TYP. 0.635 ± 0.130 (0.025 ± 0.005) 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 0.635 ± 0.25 (0.025 ± 0.010) 12 ° NOM. 0.20 (0.008) 0.30 (0.013) 1.78 (0.070) MAX. 9.65 ± 0.25 (0.380 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 1.27 (0.050) 10.9 (0.430) MAX. 2.0 (0.080) NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. LAND PATTERN RECOMMENDATION

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) ASSR-1520 8-Pin DIP Package ASSR-1520 8-Pin DIP Package with Gull Wing Surface Mount Option 300 1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.92 (0.115) MIN. 5° TYP. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002) 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 9.65 ± 0.25 (0.380 ± 0.010) A XXXX YYWW DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES). 5678 4321 OPTION CODE* UL RECOGNITION UR TYPE NUMBER OPTION NUMBERS 300 AND 500 NOT MARKED. 3.56 ± 0.13 (0.140 ± 0.005) LEAD FREE 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. 9.65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 9.65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.780 (0.070) MAX.1.19 (0.047) MAX. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002)

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) ASSR-1530 8-Pin Surface Mount Package Lead Free IR Profile 4.40 ± 0.20 0.173 ± 0.008 0.41 0.016 6.81 ± 0.40 0.268 ± 0.016 0.375 [0.015] 2.54

0.100 TYPE NUMBER

A 9.4 ± 0.2 0.369 ± 0.008 0.51 0.020 0.20 0.008 0.46 0.018 2 ± 0.2 0.079 ± 0.008 0.102 ± 0.102 0.004 ± 0.004 DIMENSIONS IN MILLIMETERS AND [INCHES] 0.80 0.0311.20 0.047 2.54 0.100 4.80 0.189 LAND PATTERN RECOMMENDATION 217°C RAMP-DOWN 6°C/SEC. MAX. RAMP-UP 3°C/SEC. MAX. 150 - 200°C 260 +0/-5°C t 25°C to PEAK 60 to 150 SEC. 20-40 SEC. TIME WITHIN 5°C of ACTUAL PEAK TEMPERATUREtp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME (SECONDS) TEMPERATURE (°C) NOTES: THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200°C, Tsmin = 150°C Non-halide flux should be used.

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Regulatory Information The ASSR-1510, ASSR-1511, ASSR-1520 and ASSR-1530 are approved by the following organizations: UL Approved under UL 1577, component recognition program up to VISO = 3750 Vrms. CSA Approved under CSA Component Acceptance Notice #5. Insulation and Safety Related Specifications Absolute Maximum Ratings Parameter Symbol ASSR-1510 ASSR-1511 ASSR-1520 ASSR-

1530 Unit Conditions

(Clearance) L(101) 4.9 7.1 4.9 mm Measured fro m input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 4.9 7.4 4.8 mm Measured fro m input terminals to output terminals, shortest distance path along body. Minimum Internal Plastic Gap (Internal Clearance) 0.08 0.08 0.08 mm Through insulat ion distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. Tracking Resistance (Comparative Tracking Index) CTI 175 175 175 V DIN IEC 112/VDE 0303 Part 1. Isolation Group (DIN VDE0109) IIIa IIIa IIIa Material Gr oup (DIN VDE 0109). Parameter Symbol Min. Max. Unit Note Storage Temperature T S –55 125 °C Operating Temperature T A –40 85 °C Junction Temperature T J —1 2 5 °C Lead Soldering Cycle Temperature — 260 °C Time — 10 s Input Current Average I F —2 5 m A Surge — 50 Transient — 1000 Reversed Input Voltage V R —5V Input Power Dissipation ASSR-1510 P IN —4 0 m W ASSR-1511 P IN —4 0 m W ASSR-1520 ASSR-1530 PIN —8 0 m W

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Recommended Operating Conditions Package Characteristics Unless otherwise specified, TA = 25°C. Output Power Dissipation ASSR-1510 P O —5 0 0 m W ASSR-1511 P O —8 0 0 m W ASSR-1520 ASSR-1530 PO —7 0 0 m W Average Output Current (TA = 25°C, TC ≤ 100°C) IO —1 . 0A a ASSR-1511 Connection B IO —2 . 0A Output Voltage (TA = 25°C) V O –60 60 V b ASSR-1511 Connection B VO 06 0V b Solder Reflow Temperature Profile See Lead Free IR Profile. a. For derating, refer to Figure 1, Figure 2, Figure 3, and Figure 4. b. The voltage across the output terminals of the relay should not exceed this rated withstand voltage. Overvoltage protection circuits should be added in some applications to protect against overvoltage transients. Parameter Symbol Min. Max. Unit Note Input Current (ON) I F(ON) 32 0 m A a a. Threshold to switch device is IF ≥ 0.5 mA; however, for qualified device performance over temperature range, it is recommended to operate at IF = 5 mA. Input Voltage (OFF) V F(OFF) 00 . 8V Operating Temperature T A –40 +85 °C Parameter Sym. Min. Typ. Max. Unit Conditions Note Input-Output Momentary Withstand Voltage VISO 3750 — — Vrms RH ≤ 50%, t = 1 min a, b a. Device is considered a two-terminal device: ASSR-1510 — pin 1, 2 short ed and pin 3, 4 shorted. ASSR-1511 — pin 1, 2, 3 shorted and pin 4, 5, 6 shorted. ASSR-1520 and ASSR-1530 — pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted. b. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For the continuous voltage rating, refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your equipment level safety specification, or Broadcom Application Note 1074, Optocoupler Input-Output Endurance Voltage. Input-Output Resistance R I-O — 1012 —Ω V I-O = 500 Vdc Input-Output Capacitance a ASSR-1510 C I-O — 0.4 — pF f = 1 MHz; V I-O = 0 Vdc ASSR-1511 C I-O — 0.5 — pF f = 1 MHz; V I-O = 0 Vdc ASSR-1520 ASSR-1530 CI-O — 0.8 — pF f = 1 MHz; V I-O = 0 Vdc Parameter Symbol Min. Max. Unit Note

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Electrical Specifications (DC) Over recommended operating TA = –40°C to 85°C, IF = 5 mA to 10 mA, unless otherwise specified. Switching Specifications (AC) Over recommended operating TA = –40°C to 85°C, IF = 5 mA to 10 mA, unless otherwise specified. Output Withstand Voltage |VO(OFF)|6 06 5— V V F = 0.8V, IO = 250 μA, TA = 25°C 55 — — V V F = 0.8V, IO = 250 μA 5 Output Leakage Current I O(OFF) —0 . 5 1 0 0 n A V F = 0.8V, VO = 60V, TA = 25°C —— 1μ A V F = 0.8V, VO = 60V 6 Output Offset Voltage |V (OS)|— 1 — μ V I F = 5 mA, IO = 0 mA Input Reverse Breakdown Voltage VR 5— —V I R = 10 μA Input Forward Voltage V F 1.1 1.3 1.65 V I F = 5 mA 8, 9 Output On-Resistance R (ON) —0 . 3 5 0 . 5 Ω I F = 5 mA, IO = 1A, Pulse ≤ 30 ms, TA = 25°C 10, 11 a a. During the pulsed R(ON) measurement (IO duration ≤ 30 ms), ambient (TA) and case temperature (TC) are equal. ASSR-1511 Connection B R(ON) —0 . 1 2 0 . 2 Ω I F = 5 mA, IO = 2A, Pulse ≤ 30 ms, TA = 25°C Turn On Time T ON —0 . 51 . 0m s I F = 5 mA, IO = 1A, TA = 25°C 12, 16 ——2 . 0m s I F = 5 mA, IO = 1A 13 — 0.25 0.5 ms I F = 10 mA, IO= 1A, TA = 25°C ——1 . 0m s I F = 10 mA, IO = 1A Turn Off Time T OFF — 0.03 0.2 ms I F = 5 mA, IO= 1A, TA = 25°C 14, 16 ——0 . 5m s I F = 5 mA, IO = 1A 15 —0 . 0 2 0 . 1 5m s I F = 10 mA, IO = 1A, TA = 25°C ——0 . 2m s I F = 10 mA, IO = 1A Output Transient Rejection dV O/dt 1 7 — kV/μs ΔV O = 60V, TA = 25°C 17 Input-Output Transient Rejection dVI-O/dt 1 ≥10 — kV/μs ΔV I-O= 1000V, TA = 25°C 18

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Figure 16: Switching Test Circuit for tON, tOFF INPUT IF OUTPUT Vo 10% tON PULSE GEN. Zo = 50 Ω tf = tr = 5ns INPUT MONITORING NODE OUTPUT Vo MONITORING NODE IF C L * R L ( *C L IS APPROXIMATELY 25pF WHICH INCLUDES PROBE AND STRAY WIRING CAPACITANCE) V DD R 200ohm tOFF 90% 50%50% P.W. = 15 ms ASSR-15xx

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Figure 17: Output Transient Rejection Test Circuit PULSE GEN. Zo = 50 Ω ASSR-15xx OUTPUT Vo MONITORING NODE C M R M C M INCLUDES PROBE AND FIXTURE CAPACITANCE R M INCLUDES PROBE AND FIXTURE RESISTANCE V PEAK tR V PEAK 90% 10% tF 90% 10% INPUT OPEN V M (MAX) < 3V F PEAK R PEAK t OR tdt dV (0.8)V0 = OVERSHOOT ON VPEAK IS TO BE < 10%_ (0.8)V

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5Ω) Figure 18: Input-Output Transient Rejection Test Circuit IF PULSE GEN. Zo = 50 Ω V FF A B SWITCH AT POSITION "B": IF = 5 mA ASSR-15xx OUTPUT Vo MONITORING NODE CL* RL = 1 k o h m ( *C L IS APPROXIMATELY 25pF WHICH INCLUDES PROBE AND STRAY WIRING CAPACITANCE) V DD = 5V V I-O tR V I-O(PEAK) 90% 10% tF 90% 10% SWITCH AT POSITION "A": IF = 0 mA V O(OFF) (min.) > 4V V O(OFF) V O(ON) V O(ON) (max.) < 0.8V

Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries and/or the EU. Copyright © 2005-2017 by Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.