ASRV05-4 APMICRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • Low capacitance: 1.5pF typical (I/O to I/O)
  • Ultra low leakage: nA level
  • Low operating voltage: 5V
  • Low clamping voltage
  • Up to 4 lines and one power line protects
  • Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-5 (Lightning) 25A (8/20μs)
  • RoHS Compliant ASRV05-4 4-Line Low Capacitance TVS Diode Array Part Number Packaging Reel Size ASRV05-4 3000/Tape & Reel 7 inch SRV05 = Device Marking Code Dot denotes Pin1 Circuit and Pin Schematic Dimensions and Pin Configuration Mechanical Characteristics
  • Package: SOT23-6
  • Lead Finish: Matte Tin
  • Case Material: “Green” Molding Compound
  • Moisture Sensitivity: Level 3 per J-STD-020
  • Terminal Connections: See Diagram Below
  • Marking Information: See Below

Applications

  • USB 2.0 power and data line
  • Monitors and flat panel displays
  • Set-top box and digital TV
  • Video graphics cards
  • Digital visual interface (DVI)
  • Notebook Computers
  • SIM Ports
  • 10/100 Ethernet
  • IEEE 1394 firewire ports Marking Information

Ordering Information

All d ata sheet.com

Revision 2 2 of 8 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power (8/20µs) Ppk 500 W Peak Pulse Current (8/20µs) IPP 25 A ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±30 ±30 kV Operating Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 5 V Breakdown Voltage VBR 6 V IT = 1mA, Pin 5 to Pin 2 Reverse Leakage Current IR 1 µA VRWM = 5V, Pin 5 to Pin 2 Forward Voltage VF 1.2 V IF = 15mA Clamping Voltage VC 12 V IPP = 1A (8 x 20µs pulse), any I/O pin to ground Clamping Voltage VC 20 V IPP = 25A (8 x 20µs pulse), any I/ O pin to ground Junction Capacitance CJ 1.5 pF VR = 0V, f = 1MHz, between I/O pins Junction Capacitance CJ 3.0 5.0 pF VR = 0V, f = 1MHz, any I/O pin to ground ASRV05-4 Note 1: I/O pins are Pin 1, 3, 4 and 6 All d ata sheet.com

Revision 2 3 of 8 www.appliedpowermicro.com Typical Performance Characteristics (TA=25°C unless otherwise Specified) ASRV05-4 Junction Capacitance vs. Reverse Voltage Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current Power Derating Curve

8 X 20μs Pulse Waveform ESD Clamping Voltage

8 kV Contact per IEC61000−4−2 100 120 0 25 50 75 100 125 150 % of Rated Power Ambient Temperature_Ta(℃) 100 0 20 40 60 80 % of Peak Pulse Current Time_t(uS) 0.01 0.1 0.1 1 10 100 1000 Peak Pulse Power_Ppp (W) Pulse Duration_tp (us) 0 1 2 3 4 5 Junction Capacitance_Cj (pF) Reverse Voltage_VR (V) Line to GND Line to Line All d ata sheet.com

Revision 2 4 of 8 www.appliedpowermicro.com Typical Application The ASRV05-4 is designed to protect four data lines from transient over-voltages by clamping them to fixed refer- ence. When the voltage on the protected line exceeds the reference voltage (plus diode VF) the steering diodes are forward biased, conducting the transient current away from the sensitive circuitry. Data lines are connected at pins 1, 3, 4 and 6. The negative reference (REF1) is connected at pin 2. This pin should be connected directly to a ground plane on the board for best results. The path length is kept as short as possible to minimize parasitic inductance. The positive reference (REF2) is connected at pin 5. ASRV05-4 123 654 I/O 1 I/O 2 I/O 3 I/O 4 To Protected IC To Protected IC VCC ASRV05-4 on Video Interface Application 1 2 3 6 5 4 1 2 3 6 5 4 VCC VCC All d ata sheet.com

Revision 2 5 of 8 www.appliedpowermicro.com ASRV05-4 on USB Port Application ASRV05-4 ASRV05-4 on SIM Port Application 1 2 3 6 5 4 Vbus Vbus GND Vbus GND USB Controller USB Port USB Port 1 2 3 6 5 4 I/O Clock Vcc GND SIMReset All d ata sheet.com

Revision 2 6 of 8 www.appliedpowermicro.com ASRV05-4 on Digital Visual Interface (DVI) Application ASRV05-4 ASRV05-4 on Ethernet 10/100 (Differential mode) Application 123 654 TX+ TX- RX+ RX- VCC GND Coupling Transformer TX+ TX- RX+ RX- RJ45 Connector 123 654 123 654 123 654 123 654 VGA TX0- TX0+ TX1- TX1+ TX2- TX2+ TC- TC+ RX0+ RX1- RX2- RC- RC+ RX0- RX1+ RX2+ LCD PC Graphics Card Flat Panel Display DM Transmitter TMDS Receiver All d ata sheet.com

Revision 2 7 of 8 www.appliedpowermicro.com ASRV05-4 on T1/E1 Interface Application ASRV05-4 1 2 3 6 5 4 VCC RTIP RRING TTIP TRING T1/E1 Tranceiver All d ata sheet.com

Revision 2 8 of 8 www.appliedpowermicro.com Suggested Land Pattern Contact Information Applied Power Microelectronics Co., Ltd. Room 5A11, Chuangjie Building, 178 South Yulong Road, Changzhou, Jiangsu 21300, P. R. China Phone: +86 (0519) 8375 8618, Fax: +86 (0519) 8375 6618 ASRV05-4 Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. SYM DIMENSIONS MILLIMETERS INCHES MIN NOM MAX MIN NOM MAX A 0.90 1.45 0.035 0.057 A1 0.00 0.15 0.000 0.006 b 0.25 0.50 0.010 0.020 c 0.08 0.22 0.003 0.009 E 2.80 BSC 0.110 BSC e 0.95 BSC 0.037 BSC e1 1.90 BSC 0.075 BSC N 6 6 aaa 0.10 0.004 ccc 0.20 0.008 A E E/2 e B ccc C 2X N/2 TIPS X C P G Y Z SYM DIMENSIONS MILLIMETERS INCHES C 2.50 0.098 G 1.40 0.055 P 0.95 0.037 X 0.60 0.024 Y 1.10 0.043 Z 3.60 0.141 A D bxN aaa C All d ata sheet.com