ASR70 APMICRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 500W peak pulse power (8/20μs)
  • Operating voltage: 70V
  • Low capacitance for high-speed data line
  • Low clamping voltage
  • Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-5 (Lightning) 25A (8/20μs)
  • RoHS Compliant ASR70 Low Capacitance TVS Diode Array Part Number Packaging Reel Size ASR70 3000/Tape & Reel 7 inch Circuit Diagram Circuit Diagram and Pin Schematic Mechanical Characteristics
  • Package: SOT-143
  • Lead Finish: Matte Tin
  • Case Material: “Green” Molding Compound.
  • Moisture Sensitivity: Level 3 per J-STD-020
  • Terminal Connections: See Diagram Below
  • Marking Information: See Below

Applications

  • ADSL Lines
  • Video Line Protection
  • I2C Bus Protection
  • LAN/WAN equipment
  • Portable Electronics
  • ISDN S/T Interface Marking Information

Ordering Information

All d ata sheet.com

Revision 2 2 of 4 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Current (8/20µs) IPP 25 A Rectifier Repetitive Peak Reverse Voltage VRRM 70 V ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±30 ±30 kV Operating Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 70 V Breakdown Voltage VBR 85 V IT = 50μA Reverse Leakage Current IR 5 μA VRWM = 70V Forward Clamping Voltage VC 1.5 V IPP = 1A (8 x 20µs pulse) Forward Clamping Voltage VC 5 V IPP = 10A (8 x 20µs pulse) Forward Clamping Voltage VC 10 V IPP = 25A (8 x 20µs pulse) Junction Capacitance CJ 5 10 pF VR = 0V, f = 1MHz, between I/O pins and GND Junction Capacitance CJ 3 pF VR = 0V, f = 1MHz, between I/O pins ASR70 All d ata sheet.com

Revision 2 3 of 4 www.appliedpowermicro.com ASR70 Typical Performance Characteristics (TA=25°C unless otherwise Specified) Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current Power Derating Curve

8 X 20μs Pulse Waveform

All d ata sheet.com

Revision 2 4 of 4 www.appliedpowermicro.com Suggested Land Pattern Contact Information Applied Power Microelectronics Co., Ltd. Website: http://www.appliedpowermicro.com Email: sales@appliedpowermicro.com Phone: +86 (0519) 8399 3606 SYM DIMENSIONS MILLIMETERS INCHES C 2.20 0.087 E1 1.92 0.076 E2 1.72 0.068 G 0.80 0.031 X1 1.00 0.039 X2 1.20 0.047 Y 1.40 0.055 Z 3.60 0.141 A e 1 2 4 3 e /2 e1 bxN bbb C A B B aaa C A B S IDE VIEW S EE DETAIL A H 0.25C S EATING PLANE GAUGE PLANE 0 c L DETAIL A D E A C S EATING PLANE ccc C4X INCHES .114 E D b e c .011 .003 .082 DIM A MIN .000 .031 0.51 0.20 2.64 0.30 0.08 2.10 (.021) .075 .093 .020 .008 .104 (0.54)

1.92 B S C

2.37 2.90 MILLIMETERS MAX 0.15 1.22 MIN DIMENS IONS 0.013 MAXNOM - .006 .048 NOM 0.80 3.042.80.110 .120 e1 .008 0.20 BS C E1 .051 1.30 0.940.76.037.029 1.401.20 N 4 4 0 - 8°0°8°0° - .055.047 aaa .006 0.15 bbb .008 0.20 ccc .004 0.10 C Y Y GZ X1 X1 Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. ASR70 All d ata sheet.com