ASR01_14 P-DUKE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

1 www.PDUKE.com 2014/04/30 ASR01-SERIES DC-DC CONVERTER UP TO 15Watts FEATURES APPLICATIONS

  • PIN-OUT COMPATIBLE WITH LM79XX LINEAR REGULATORS
  • SMALL SIZE AND LOW PROFILE : 0.46 X 0.30 X 0.65 INCH
  • LOW STANDBY POWER
  • OVER-CURRENT PROTECTION
  • SHORT CIRCUIT PROTECTION
  • OVER-TEMPERATURE PROTECTION
  • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1
  • CE MARKED
  • COMPLIANT TO RoHS II & REACH
  • WIRELESS NETWORK
  • TELECOM/DATACOM
  • INDUSTRY CONTROL SYSTEM
  • DISTRIBUTED POWER ARCHITECTURES
  • SEMICONDUCTOR EQUIPMENT NON IOSOLATION LOW STANDBY POWER OCP SCP OTP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 otherwise noted℃ Output Current Efficiency Input Range Output Voltage @Min.Load @FullLoad Input Current @ No Load Min.Vin Max.Vin Maximum Capacitor Load Model Number VDC VDC A A mA % % µF ASR01-12S05 -7 ~ -32 -5 -0.1 -1 -3 91.5 84.5 1600 ASR01-12S5P2 -7 ~ -32 -5.2 -0.1 -1 -3 92.0 85.0 1600 ASR01-12S06 -8 ~ -32 -6 -0.1 -1 -3 92.5 86.5 1000 ASR01-12S08 -10.5 ~ -32 -8 -0.1 -1 -3 94.0 89.0 1000 ASR01-24S09 -11.5 ~ -32 -9 -0.1 -1 -3 94.5 90.5 1000 ASR01-24S12 -15 ~ -32 -12 -0.1 -1 -3 96.0 92.0 470 ASR01-24S15 -18 ~ -32 -15 -0.1 -1 -3 96.0 93.5 470 PART NUMBER STRUCTURE ASR01 - 12 S 05 - A Series Name Input Voltage (VDC) Output Quantity Output Voltage (VDC) Assembly Option 12: 24: -7 ~ -32 -8 ~ -32 -10.5 ~ -32 -11.5 ~ -32 -15 ~ -32 -18 ~ -32 Single 05: 5P2: 06: 08: 09: 12: 15: -5.2 -12 -15 /filetall/filetall /filetall/filetall: Standard Horizontal type

2 www.PDUKE.com 2014/04/30 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range ASR01-12S05 ASR01-12S5P2 ASR01-12S06 ASR01-12S08 ASR01-24S09 ASR01-24S12 ASR01-24S15 -10.5 -11.5 -15 -18 -12 -12 -12 -12 -24 -24 -24 -32 -32 -32 -32 -32 -32 -32 VDC Start up time Constant resistive load Power up 15 ms Rise time Time for Vo to rise from 10% to 90% of Vo 10 ms Input reflected ripple current -12Vin(nom) -24Vin(nom) 100 100 mAp-p Maximum input current Vin=Vin(min); Io=Io(max) -1 A Input filter Capacitor type OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy -2.0 +2.0 % Line regulation Low Line to High Line at Full Load -1.0 +1.0 % Load regulation 10% Full Load to Full Load Standard type Suffix-A -0.5 -0.6 +0.5 +0.6 % Ripple and noise Measured by 20MHz bandwidth -5Vout -5.2Vout -6Vout -8Vout -9Vout -12Vout -15Vout mVp-p Temperature coefficient -0.015 +0.015 %/ ℃ Dynamic load response 50% load step change Peak deviation Recovery time 5 250 %Vo µs Over load protection % of Iout rated; Hiccup mode -2.0 A Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Switching frequency 12S05,12S5P2 Others 323 425 380 500 437 575 kHz Safety meets UL60950-1 EN60950-1 IEC60950-1 Case material Non-conductive black plastic Potting material Silicone (UL94 V-0) Weight 3.1g(0.11oz) MTBF MIL-HDBK-217F, Full load 8.475 x 10 6 hrs ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating temperature range -40 +85 ℃ Over temperature protection Internal IC junction +165 ℃ Storage temperature range -55 +125 ℃ Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH CAUTION: This power module is not internally fused. An input line fuse must always be used.

3 www.PDUKE.com 2014/04/30 CHARACTERISTIC CURVE ASR01-12S05 Derating Curve ASR01-12S05 Efficiency V S Input Voltage ASR01-12S05 Efficiency VS Output Lo ad MECHANICAL DRAWING FOR STARDANDS ASR01-/filetall/filetallS/filetall/filetall Vertical SIP type 1. All dimensions in Inch (mm) Tolerance: X.XX ± 0.02 (X.X ± 0.5) X.XXX± 0.01 (X.XX± 0.25) 2. Pin pitch tolerance ± 0.01(0.25) 3. Pin dimension tolerance ± 0.004 (0.1) PIN CONNECTION PIN DEFINE

1 GND

MECHANICAL DRAWING FOR SUFFIX-A ASR01-/filetall/filetallS/filetall/filetall-A Horizontal SIP type 1. All dimensions in Inch (mm) Tolerance: X.XX ± 0.02 (X.X ± 0.5) X.XXX± 0.01 (X.XX± 0.25) 2. Pin pitch tolerance ± 0.01(0.25) 3. Pin dimension tolerance ± 0.004 (0.1) PIN CONNECTION PIN DEFINE