ASKHC2O04AC CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

J–81 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com A Series General Purpose Snap-acting Switches Features/Benefits

  • Low cost—high performance
  • Long electrical life
  • Single and double pole
  • Sealed actuator option available Typical Applications
  • Enclosure equipment
  • Garage door openers
  • Vending machines Specifications CONTACT RATING: From low level* to 25 AMPS @ 277 V AC. ELECTRICAL LIFE: 75,000 cycles at 25 AMPS @ 250 V AC, 200,000 cycles at 15 AMPS @ 250 V AC. INSULATION RESISTANCE: 1,000 M ohm min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –67ºF to 185ºF (–55ºC to 85ºC). OPERATING FORCE: 20 oz. (567 grams) max. SP models. 40 oz. (1134 grams) max. DP models at actuator button. MOUNTING: Torque screws 3 in/lbs max. MOUNTING NUT: 20 in/lbs max. torque * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. NOTE: Specifications and materials listed above are for switches with standard options. C&K does provide specific and custom switches at 30 AMPS @ 277 VAC. Please consult Customer Service Center. Materials SWITCH HOUSING: Heat resistant phenolic (UL 94V-0). ACTUATOR BUTTON: Heat resistant phenolic (UL 94V-0). SPRING: Copper alloy. PIVOT: Brass alloy for models up to 15 AMPS. Copper for 25 AMP models. MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less. Fine silver for ratings up to 15 AMPS. Silver alloy for ratings of 25 AMPS. STATIONARY CONTACTS: Gold alloy on brass base alloy for ratings 1 AMP or less. Fine silver welded on brass base alloy for ratings greater than 1 AMP up to 15 AMPS. Fine silver welded on copper alloy for ratings 25 AMPS. TERMINALS: Brass alloy for 1 AMP up to 15 AMPS. Copper alloy for 25 AMPS. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-78 through J-81. For additional options not shown in catalog, consult Customer Service Center. Series A General Purpose Snap-acting Switches Operating Force KH* 20 oz./567 grams PD** 30 oz./850 grams GG* 5 oz./142 grams PF**40 oz./1134 grams Electrical Rating C2 15 A, 125, 25O V AC; 3/4 HP, 125 V AC; 1 1/2 HP, 250 V AC F3 25 A, 125, 250 V AC; 1 HP, 125 V Ac;

2 HP, 250 V AC; 2 A, 24 V DC

F5 1 A, 125 V AC, 3O V DC Actuator P0 Pin plunger T0 Lever A0 Lever roller A2 Lever roller, high force BB Large red button B1 Large black button J0 High overtravel plunger L0 Leaf Q0 High operating position plunger W0 Leaf roller Terminations 4A .250” quick connect Circuitry C DT W ST N.C. Y ST N.O. No. Poles S SP D DP 4 AA * Single Pole ** Double Pole

14 Jan 19

NOTE: To select switching function, see CIRCUITRY section, page J-81. A Series General Purpose Snap-acting Switches SERIES NO. POLES S SINGLE POLE SWITCH D DOUBLE POLE SWITCH A GENERAL PURPOSE SNAP-ACTING SWITCHES Mounting holes will accept pins or screws Mounting holes will accept pins or screws J Snap-acting J–82 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com

J–83 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com A Series General Purpose Snap-acting Switches OPERATING FORCE ELECTRICAL RATING NOTE: Operating force varies with actuator, see ACTUATOR option section.

  • AVAILABLE x NOTA VAILABLE
  • F5 x • • •F3
  • •••C2 OPERATING FORCE (OZ./GRAMS) ELECTRICAL RATING AVAILABLE COMBINATIONS GG KH PD PF 5 20 30 40 142 567 850 1134
  • • • From low level* to 1 AMP @ 125 V AC, 30 V DC.Gold alloy on brass base alloy.Gold alloy.F5

25 AMPS @ 125 & 250 V AC; 1 HP @ 125 V AC;

2 HP @ 250 V AC; 2 AMPS @ 24 V DC. Silver welded on copper base alloy.Silver alloy.F3

15 AMPS @ 125 & 250 V AC; 3/4 HP @ 125 V AC;

1-1/2 HP @ 250 V AC. Fine silver welded on brass base alloy.Fine silver.C2 ELECTRICALR ATING CONTACT MATERIAL MOVABLE CONTACT STATIONARY CONTACTOPTION CODE All models with all options. Contact Customer Service Center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. 1134DPPF 142SPGG 850DPPD 567SPKH BASICS WITCH OPERATING FORCE (OZ./GRAMS) NO. POLESOPTION CODE

Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com A Series General Purpose Snap-acting Switches ACTUATOR FIG. 1 High Overtravel Plunger A B FIG. 2 Leaf A B C FIG. 3 Lever Roller A B C DE A B C DE F FIG. 4 Lever roller (High Force) FIG. 5 High Overtravel Plunger Torque 20 in/lbs max. (Nut) A BC D .322 .003 (8,18 0,08) .380±.003 ?(9,65±0,08) PANEL MOUNTING A B C FIG. 6 B1 – Black Button BB – Red Button 6-32 NC THD 2 places PANEL MOUNTING 0.144 DIA. min 2 places NOTE: The “H0” high overtravel plunger option provides .100 (2,54) min. overtravel and longer mechanical life (1,000,000 operations typical). FIG. 7 Lever A BCD FIG. 8 Leaf Roller A B C D J Snap-acting J–84 ——.25 dia. (6,4Ø) .38 (9,6) .670 ± .030 (17,02 ± 0,76) .50 (12,7)5Q0 ———.50 (12,7) .312 ± .062 (17,92 ± 1,57) 1.62 (41,1)2L0 ——.25 dia. (6,4Ø) .38 (9,7) .810 ± .030 (20,6 ± 0,8) .50 (12,7)5J0 ———.98 dia. (24,9Ø) .40 ± 0.1 (10,2 ± 2.54) 1.50 (38,1)6BB ———.98 dia. (24,9Ø) .40 ± 0.1 (10,2 ± 2.54) 1.50 (38,1)6B1 ——.50 (12,7) .375 dia. (9,53Ø) .718 ± .062 (18,24 ± 1,57) 1.25 (31,8)4A2 —.50 (12,7) .50 (12,7) .375 dia. (9,53Ø) .718 ± .062 (18,24 ± 1,57) 1.38 (35,1)3A0 (7,24 ± 0,76) .50 (12,7)1P0 OPTION CODE 1.50 (38,1) 1.50 (38,1) .318 ± .062 (8,08 ± 1,57) .801 ± .062 (20,34 ± 1,57) .50 (12,7) .375 dia. (9,53ø) .50 (12,7) .50 (12,7) — —

J–85 A Series General Purpose Snap-acting Switches ACTUATOR NOTE: For basic switch operating forces, see page J-77. SWITCH CHARACTERISTICS MAXIMUM OPERATING FORCE (OZ./GRAMS) GG KH PD PF OPERATING POSITION GG KH PD PF .718 (18,24) .718 (18,24) .312 (7,92) 312 (7,92) .718 (18,24) 312 .187 (7,92) (4,75) .14 (5,6) 050 (1,27) .050 (1,27) .187 (4,75) . 062 (1,57) .050 (1,27) .050 (1,27) .187 (4,75) .062 (1,57) .312 (7,92) .25 (6,4) .050 (1,27) .050 (1,27) .050 (1,27) .281 (7,14) .050 (1,27) .050 (1,27) .312 (7,92) .281 (7,14) 0.3 0.5 1 8.5 14 28 0.4 0.5 1 11 14 28 1 3 6 28 85 170 1 3 6 28 85 170 1 3 6 28 85 170 0.5 1 2 14 28 56.7 1 3 6 28 85 170 1 3 6 28 85 170 0.3 0.5 1 8.5 14 28 0.5 1 2 14 28 56.7 1.5 4 6 10 42.5 113 170 283 1.5 4 6 10 42.5 113 170 283 8 20 30 40 227 567 850 1134 8 20 30 40 227 567 850 1134 5 20 30 40 142 567 850 1134 3 12 18 22 85 340 510 624 8 20 30 40 227 567 850 1134 5 20 30 40 142 567 850 1134 1.5 4 6 10 42.5 113 170 283 3 12 18 22 85 340 510 624 MINIMUM OVERTRAVEL GG KH PD PF MAXIMUM PRETRAVEL GG KH PD PF MINIMUM RELEASE FORCE (OZ./GRAMS) GG KH PD PF OPTION CODE BB TERMINATIONS 4A .250” QUICK CONNECT NOTE: Terminals can be supplied at various angles. Other terminal styles can be supplied for special applications. Consult Customer Service Center for special requirements. CIRCUITRY Y ST N.O. (Single Throw, Normally Open) W ST N.C. (Single Throw, Normally Closed) C DT (Double Throw, Normally Open & Normally Closed) NOTE: To select number of poles, see NO. POLES section, page J-56 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com Washer and nut ship with switch