ASKHC2P04AC ITT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

K–44 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K A Series General Purpose Snap-acting Switches Models Available Features/Benefits

  • Low cost—high performance
  • Long electrical life
  • Single and double pole
  • Sealed actuator option available Typical Applications
  • Enclosure equipment
  • Garage door openers
  • Vending machines Specifications CONTACT RATING: From low level* to 30.1 AMPS @ 277 V AC. ELECTRICAL LIFE: 75,000 cycles at 25 AMPS @ 250 V AC, 200,000 cycles at 15 AMPS @ 250 V AC. INSULATION RESISTANCE: 1,000 M ohm min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –67ºF to 185ºF (–55ºC to 85ºC). OPERATING FORCE: 20 oz. (567 grams) max. SP models. 40 oz. (1134 grams) max. DP models at actuator button. MOUNTING: Torque screws 3 in/lbs max. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials SWITCH HOUSING: Heat resistant phenolic (UL 94V-0). ACTUATOR BUTTON: Heat resistant phenolic (UL 94V-0). SPRING: Copper alloy. PIVOT: Brass alloy for models up to 15 AMPS. Copper for 25 AMP models. MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less. Fine silver for ratings up to 15 AMPS. Precious metal alloy for ratings of 30.1 AMPS. STATIONARY CONTACTS: Gold alloy on brass base alloy for ratings 1 AMP or less. Fine silver welded on brass base alloy for ratings greater than 1 AMP up to 15 AMPS. Fine silver welded on copper alloy for ratings 30.1 AMPS. TERMINALS: Brass alloy for 1 AMP up to 15 AMPS. Copper alloy for 30.1 AMPS. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-45 through K-49. For additional options not shown in catalog, consult Customer Service Center. Series A General Purpose Snap-acting Switches Operating Force KH*20 oz./567 grams PD** 30 oz./850 grams GG*5 oz./142 grams PF**40 oz./1134 grams Electrical Rating C2 15 A, 125, 25O V AC; 3/4 HP, 125 V AC; 1 1/2 HP , 250 V AC F3 25 A, 125, 250 V AC; 1 HP , 125 V Ac;

2 HP, 250 V AC; 2 A, 24 V DC

F5 1 A, 125 V AC, 3O V DC Actuator P0 Pin plunger T0 Lever A0 Lever roller A2 Lever roller, high force BB Large red button B1 Large black button J0 High overtravel plunger L0 Leaf Q0 High operating position plunger W0 Leaf roller Terminations 4A .250" quick connect Circuitry C DT W ST N.C. Y ST N.O. No. Poles S SP D DP 4 AA * Single Pole ** Double Pole

Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K A Series General Purpose Snap-acting Switches SERIES NO. POLES S SINGLE POLE SWITCH D DOUBLE POLE SWITCH A GENERAL PURPOSE SNAP-ACTING SWITCHES Mounting holes will accept pins or scr ews Mounting holes will accept pins or screws NOTE: To select switching function, see CIRCUITRY section, page K-49.

Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K A Series General Purpose Snap-acting Switches OPERATING FORCE ELECTRICAL RATING 1134DPPF 142SPGG 850DPPD 567SPKH BASIC SWITCH OPERATING FORCE (OZ./GRAMS) NO. POLESOPTION CODE NOTE: Operating force varies with actuator, see ACTUATOR option section.

  • AVAILABLE x NOT AVAILABLE
  • F5 x • • •F3 x •••C2 OPERATING FORCE (OZ./GRAMS) ELECTRICAL RATING AVAILABLE COMBINATIONS GG K H P D P F 5 20 3 0 40 142 5 67 850 1134
  • x x From low level* to 1 AMP @ 125 V AC, 30 V DC.Gold alloy on brass base alloy. Gold alloy.F5

25 AMPS @ 125 & 250 V AC; 1 HP @ 125 V AC;

2 HP @ 250 V AC; 2 AMPS @ 24 V DC. Silver welded on copper base alloy.Precious metal alloy.F3

15 AMPS @ 125 & 250 V AC; 3/4 HP @ 125 V AC;

1-1/2 HP @ 250 V AC. Fine silver welded on brass base alloy.Fine silver.C2 ELECTRICALR ATING CONTACT MATERIAL STATIONARY CONTACT OPTION CODE All models with all options. Contact Customer Service Center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, ROHS COMPLIANT* ROHS COMPATIBLE* YES YES YES YES YES YES MOVABLE CONTACT * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.

K–47 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K A Series General Purpose Snap-acting Switches ACTUATOR FIG. 1 High Overtravel Plunger A B FIG. 2 Leaf A B C FIG. 3 Lever Roller A B C DE A B C DE F FIG. 4 Lever roller (High Force) FIG. 5 High Overtravel Plunger A BC D .322 .003 (8,18 0,08) .380±.003 ?(9,65±0,08) PANEL MOUNTING A B C FIG. 6 B1 – Black Button BB – Red Button PANEL MOUNTING 6-32 NC THD (2) ——.25 dia. (6,4Ø) .38 (9,6) .670 ± .030 (17,02 ± 0,76) .50 (12,7)5Q0 ———.50 (12,7) .312 ± .062 (17,92 ± 1,57) 1.62 (41,1)2L0 ——.25 dia. (6,4Ø) .38 (9,7) .810 ± .030 (20,6 ± 0,8) .50 (12,7)5J0 ———.98 dia. (24,9Ø) .40 (10,2) 1.50 (38,1)6BB ———.98 dia. (24,9Ø) .40 (10,2) 1.50 (38,1)6B1 ——.50 (12,7) .375 dia. (9,53Ø) .718 ± .062 (18,24 ± 1,57) 1.25 (31,8)4A2 —.50 (12,7) .50 (12,7) .375 dia. (9,53Ø) .718 ± .062 (18,24 ± 1,57) 1.38 (35,1)3A0 (7,24 ± 0,76) .50 (12,7)1P0 OPTION CODE NOTE: The “H0” high overtravel plunger option provides .100 (2,54) min. overtravel and longer mechanical life (1,000,000 operations typical). FIG. 7 Lever A BCD FIG. 8 Leaf Roller A B C D 1.50 (38,1) 1.50 (38,1) .312 ± .062 (7,92 ± 1,57) .718 ± .062 (18,24 ± 1,57) .50 (12,7) .375 dia. (9,53ø) .50 (12,7) .50 (12,7) — —

K–48 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K A Series General Purpose Snap-acting Switches ACTUATOR .718 (18,24) .062 (1,57) .281 (7,14) .094 (2,39) 0.5 1 2 14 28 56.7 3 12 18 22 85 340 510 624W0 .312 (7,92) .187 (4,75) .312 (7,92) .062 (1,57) 0.3 0.5 1 8.5 14 28 1.5 4 6 10 42.5 113 170 283T0 —.050 (1,27) .050 (1,27) .010 (0,25) 13 6 28 85 170 5 20 30 40 142 567 850 1134Q0 —.050 (1,27) .050 (1,27) .010 (0,25) 13 6 28 85 170 8 20 30 40 227 567 850 1134P0 .312 (7,92) .062 (1,57) .281 (7,14) .094 (2,39) 0.5 12 14 28 56.7 3 12 18 22 85 340 510 624L0 —.187 (4,75) .050 (1,27) .010 (0,25) 13 6 28 85 170 5 20 30 40 142 567 850 1134J0 —.050 (1,27) .050 (1,27) .010 (0,25) 13 6 28 85 170 8 20 30 40 227 567 850 1134BB —.050 (1,27) .050 (1,27) .010 (0,25) 13 6 28 85 170 8 20 30 40 227 567 850 1134B1 .718 (18,24) .14 (5,6) .25 (6,4) .045 (1,14) 0.4 0.5 1 11 14 28 1.5 4 6 10 42.5 113 170 283A2 .718 (18,24) .312 .187 (7,92) (4,75) .312 (7,92) .062 (1,57) 0.3 0.5 1 8.5 14 28 1.5 4 6 10 42.5 113 170 283A0 OPERATING POSITION GG KH PD PF MINIMUM OVERTRAVEL GG KH PD PF MAXIMUM PRETRAVEL GG KH PD PF MAXIMUM RELEASE FORCE (OZ./GRAMS) GG KH PD PF MINIMUM RELEASE FORCE (OZ./GRAMS) GG KH PD PF MAXIMUM OPERATING FORCE (OZ./GRAMS) GG KH PD PF OPTION CODE NOTE: For basic switch operating forces, see page K-46. SWITCH CHARACTERISTICS

K–49 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K A Series General Purpose Snap-acting Switches TERMINATIONS CIRCUITRY Y ST N.O. (Single Throw, Normally Open) W ST N.C. (Single Throw, Normally Closed) C DT (Double Throw, Normally Open & Normally Closed) 4A .250" QUICK CONNECT NOTE: To select number of poles, see NO. POLES section, page K-45. NOTE: Terminals can be supplied at various angles. Other terminal styles can be supplied for special applications. Consult Customer Service Center for special requirements.