ASO SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Mini-SIP SSR
  • Ratings to 2A @ 280 VAC
  • SCR output
  • DC control
  • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 1.5 A 2 A 4-10 VDC ASO241 ASO242 Description ASO241 ASO242 Operating Voltage (47-63Hz) [Vrms] 12-280 12-280 Transient Overvoltage [Vpk] 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.1 0.1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 3 500 500 Maximum Load Current [Arms] 3 1.5 2.0 Minimum Load Current [Arms] 0.025 0.06 Maximum Surge Current (16.6ms) [Apk] 40 120 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.5 1.5 Minimum Power Factor (with Maximum Load) 0.5 0.5 SPECIFICATIONS Output (1)

www.sensata.com Page 2 Copyright © 2024 Sensata Technologies, Inc. Description Parameters Control Voltage Range 4-10 VDC Must Turn On Voltage 4.0 VDC Must Turn Off Voltage 1.0 VDC Typical Input Current @ 5 VDC 15 mAdc Nominal Input Impedance 300 Ohm Maximum Turn-On Time [msec] 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2 2500 Vrms Minimum Insulation Resistance (@ 500 V DC) 2 109 Ohms Maximum Capacitance, Input/Output 8.0 pF Ambient Operating Temperature Range -30ºC to 80ºC Ambient Storage Temperature Range -30ºC to 125ºC Weight (typical) 0.07 oz. (1.9g) Encapsulation Thermally Conductive Epoxy WIRING DIAGRAM LOAD CAN BE WIRED IN POSITION A or B A B TRIGGER CIRCUIT ACAC LOAD LOAD 3 421 Input (1) General (1)

www.sensata.com Page 3 Copyright © 2024 Sensata Technologies, Inc. THERMAL DERATE INFORMATION MECHANICAL SPECIFICATIONS *Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] ASO - 241 - R Series ASO Operational Current 241: 1.5 Amps 242: 2 Amps Switching Mode Blank: Zero Voltage Turn-On R: Random Turn-On ORDERING OPTIONS Example : ASO241-R Required for valid part number For options only and not required for valid part number

www.sensata.com CONTACT US Americas +1 (877) 502 5500 sales.crydom@sensata.com Europe, Middle East & Africa +44 (1202) 416170 ssr-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com. SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Rev. 03/21/2024 ECN 20395 FDE-07-01 Rev. B Copyright © 2024 Sensata Technologies, Inc. WARNINGS GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Dielectric and insulation resistance are measured between input and output (3) Off-State dv/dt test method per EIA/NARM standard RS-443 AGENCY APPROVALS & CERTIFICATIONS HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury. E RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage.