ASM-1900117-11 MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Page <1> V1.021/10/19 Raspberry Pi A+ Case Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Specification Material : ABS Diagram No. Description Qty.

1 Pi 3A+ Base Moulding

2 Pi 3A+ Top Moulding

3 Rubber Foot 10×1mm 4

  1. General draft angle shall be 1° unless otherwise stated 2. Product should not have weld line and/or flow mark. 3. Product should not have stress/sink marks 4. Height of burrs should be less than 0.1mm 5. The part number should be expressed by convex letters, the type of which is optional. 6. Gate should be removed completely. 7. Sections shown are true at section line, various details that appear behind section line are omitted and or included to clarify the drawing. 8. Vendor inspection reports must accompany samples submitted for approval. 9. Parts must be suitably packed to avoid damage in shipment. Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number Raspberry Pi A+ Case, Black ASM-1900117-21 Raspberry Pi A+ Case, White ASM-1900117-11 Raspberry Pi A+ Case, Clear ASM-1900117-01