ASL60 ASTRODYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

60W Ultraminiature Open Frame Switching Power Supplies A S L 6 0 s e r i e s 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181WWW.ASTRODYNE.COM 2”W x 4”L x 1.2”H Up to 60W Output Power Universal 90-264VAC Input Single and Dual Outputs from 5VDC to 48VDC High Efficiency up to 86% 3000V Isolation 1U Compatible Height Order On-Line! astrodyne.com Model Number Output Voltage Max. O/P Amps Min. O/P Amps Efficiency @ 230VAC R&N P-P Current Limit SINGLE OUTPUT ASL60-5(A)* 5VDC 9 0 73% 100mV 112% ASL60-9(A)* 9VDC 6.66 0 82% 100mV 135% ASL60-12(A)* 12VDC 5 0 84% 150mV 162% ASL60-15(A)* 15VDC 4 0 84% 150mV 162% ASL60-24(A)* 24VDC 2.5 0 86% 150mV 162% ASL60-36(A)* 36VDC 1.66 0 85% 100mV 125% ASL60-48(A)* 48VDC 1.25 0 86% 400mV 162% DUAL OUTPUT (V1/V2) (I1/I2) ASL60D-1 5/12VDC 5/3 1/0.60 81% 100/120mV 150% ASL60D-2 5/15VDC 5/2.4 1/0.48 82% 100/150mV 150% ASL60D-3 5/24VDC 5/1.5 1/0.30 82% 100/240mV 150% ASL60D-5 5/48VDC 5/0.73 1/0.15 82% 100/400mV 150% *Note: The Single Outputs can be ordered with Molex 09-50-30x1 I/O connectors.. Simply add the suffix “A” to the end of the Model Number. For example, ASL60-5A

60W Ultraminiature Open Frame Switching Power Supplies A S L 6 0 s e r i e s 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181WWW.ASTRODYNE.COM * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. INPUT SPECIFICATIONS Input Voltage Range 90-264 VAC Frequency Range 47-63 Hz Inrush Current, typ: 30A @ 100VAC Input * 60A @ 200VAC Input * Leakage Current <0.1mA OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation (0%-FL) Single O/P: ± 1% Dual O/P (V1/V2): ± 3/5% max Line Regulation (LL-HL) Single O/P: ± 1% max Dual O/P (V1/V2): ± 1/2% max Cross Regulation (Dual Outputs) (100-20% L w. other O/P at 60%) ± 3/5% max Preset Accuracy 1% DC Voltage Adjust (typ) ± 6% of FS (Primary) Temperature Coefficient ± 0.05%/°C Ripple/Noise, 20Mhz BW See Selection Chart Over Voltage Protection Clamp, 118-130% Current Limit, Self Recovering See Selection Chart * Short Circuit Protection Continuous, self-recovering * Hold Up Time (115V / 60Hz) 10 mS, min. GENERAL SPECIFICATIONS Input-Out Isolation 3000VAC Efficiency See Selection Chart Switching Frequency 65Khz, (fixed, typical) Safety UL, TUV, CB PHYSICAL SPECIFICATIONS Size 2” x 4” x 1.2” 50.8 x 101.6 x 30.48mm Construction Open Frame Weight 7oz (198g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -10 to +50°C(FL) , See Derate Storage Temperature -25 to +85°C * Relative Humidity 0 to + 95%, non-cond * EMC EN 60601-1-2:2001 MTBF 185,000 Hrs Mil Std 217, 25°C OUTPUT DERATING CURVE -10 0 10 20 30 40 50 60 100

60W Ultraminiature Open Frame Switching Power Supplies A S L 6 0 s e r i e s 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181WWW.ASTRODYNE.COM MECHANICAL DIMENSIONS WITH JST CONNECTORS - STANDARD 0 5 1 . 0 0 8 . 3 43.20 1.701 3.80 0.150 4 9 1 0 7 . 3 29.60 1.165 L ) 5 2 1 . 0 O ( 7 1 . 3 O X 4 50.80 2.000 N 0 6 . 1 0 1 0 0 0 . 4 Pin # Single Outputs Dual Outputs

1 AC Line AC Line

2 AC Neutral AC Neutral

4 GND GND

5 GND GND

All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. Input Connector: JST B3P-VH Input Mating Connector: JST VHR-3N or Molex 51144 Series Output Connector: JST B4P-VH Output Mating Connector: JST VHR-4N or Molex 53520 & 53521 Series Use with JST # SVH-21T-P1.1 or Molex # 50539-8100 Crimp Terminals

60W Ultraminiature Open Frame Switching Power Supplies A S L 6 0 s e r i e s 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181WWW.ASTRODYNE.COM 0 5 1 . 0 0 8 . 3 43.20 1.701 3.80 0.150 4 9 1 0 7 . 3 29.60 1.165 L ) 5 2 1 . 0 O ( 7 1 . 3 O X 4 50.80 2.000 N 0 6 . 1 0 1 0 0 0 . 4 Input Connector: Molex 09-50-3031 Input Mating Connector: JST VHR-3N or Molex 51144 Series Output Connector: Molex 09-50-3041 Output Mating Connector: JST VHR-4N or Molex 53520 & 53521 Series Use with JST # SVH-21T-P1.1 or Molex # 50539-8100 Crimp Terminals All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. Pin # Single Outputs

1 AC Line

2 AC Neutral

5 GND

6 GND

MECHANICAL DIMENSIONS WITH MOLEx CONNECTORS (“A” VERSIONS SINGLE OUTPUTS ONLY)