ASD1

ASD1 MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

MODEL: ASD1 ASD1 SPECIFICATIONS ES-1610 Rev.11 Page 1/4 http://www.m-system.co.jp/ Plug-in Signal Conditioners M-UNIT DC ALARM (thumbwheel switch adjustment) Functions & Features

• Providing SPDT relay outputs at preset DC input levels
• Dual trip
• Latching or non-latching output
• Thumbwheel switch setpoint adjustments
• Enclosed relays
• Relays can be powered 110 V DC
• Isolation up to 2000 V AC
• High-density mounting Typical Applications
• Annunciator
• Various alarm applications SET2 SET1 4 4 123456 123456 (1.97) 132 (5.20) (3.15) mm (inch)

ORDERING INFORMATION

• Code number: ASD1-[1][2][3][4][5]-[6][7] Specify a code from below for each of [1] through [7]. (e.g. ASD1-61302-K3/UL/Q)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) Voltage 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) [2] SETPOINT 1 OUTPUT 1: Hi (coil energized at alarm) 2: Hi (coil de-energized at alarm) 3: Lo (coil energized at alarm) 4: Lo (coil de-energized at alarm) [3] SETPOINT 2 OUTPUT 1: Hi (coil energized at alarm) 2: Hi (coil de-energized at alarm) 3: Lo (coil energized at alarm) 4: Lo (coil de-energized at alarm) [4] ON DELAY TIME 0: 0.5 seconds 1: 1 second 2: 2 seconds 3: 3 seconds 4: 4 seconds [5] POWER ON DELAY TIME 1: 1 second 2: 2 seconds 5: 5 seconds [6] POWER INPUT AC Power K3: 100 – 120 V AC (Operational voltage range 90 – 132 V, 47 – 66 Hz) L3: 200 – 240 V AC (Operational voltage range 180 – 264 V, 47 – 66 Hz) (UL not available) [7] OPTIONS (multiple selections) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating (UL not available) TERMINAL SCREW MATERIAL /S01: Stainless steel (UL not available) GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3.5 screw terminals Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Setpoint adjustments: Thumbwheel switches (front); 0 – 99

MODEL: ASD1 ASD1 SPECIFICATIONS ES-1610 Rev.11 Page 2/4 http://www.m-system.co.jp/ % independently; 1 % increments Deadband and latching control: 16-position rotary switches (front)

• Deadband: 0.5, 1 – 14 % independently; 1 % increments (SW position 0 = 0.5, A thr. E = 10 thr. 14); [Lo SP + Deadband] ≤ 102
• Latching: enabled at the position "F." For resetting, turn the power supply off or set the switch position to other than "F." Front LEDs Output 1: Red LED turns on when the coil is energized. Output 2: Green LED turns on when the coil is energized. INPUT SPECIFICATIONS ■ DC Current: Shunt resistor attached to the input terminals (0.5 W) OUTPUT SPECIFICATIONS ■ Relay Contact: 100 V AC @ 5 A (cos ø = 1)

120 V AC @ 5 A (cos ø = 1)

240 V AC @ 2.5 A (cos ø = 1)

30 V DC @ 5 A (resistive load)

Maximum switching voltage: 300 V AC or 125 V DC Maximum switching power: 600 VA or 150 W Minimum load: 5 V DC @ 10 mA Mechanical life: 5 × 107 cycles 0 50 100 ▲ Input (%) Output 2 Setpoint Output 1 Setpoint Output 1 (1-3)ON Output 2 (9-11)ON (9-10)ON (1-2)ON

• Output Code 1, 4 0 50 100 ▲ Input (%) Output 2 Setpoint Output 1 Setpoint Output 1 (1-3)ON Output 2 (9-11)ON (9-10)ON (1-2)ON
• Output Code 2, 3 Alarm Trip Operation Terminal No. in parentheses Trip Operation in Power Failure : Terminals 1 – 3, 9 – 11 turn ON. INSTALLATION Power consumption
• AC: Approx. 3 VA Operating temperature: -5 to +60°C (23 to 140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 300 g (0.66 lb) PERFORMANCE in percentage of span Setpoint accuracy: ±0.5 % Deadband setpoint accuracy: ±0.3 % Power ON delay time accuracy: rating ±35 % Trip point repeatability: ±0.05 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) ON delay time accuracy: (0 – 100 % at 90 % setpoint) Code 0: 0.5 ±0.2 sec. Code 1, 2, 3, 4: rating ±20 % Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Measurement Category II (output) Installation Category II (power) Pollution Degree 2 Input to output to power: Basic insulation (300 V) RoHS Directive EN 50581 Approval: UL/C-UL general safety requirements (UL 3111-1, CAN/CSA-C22.2 No.1010-1)

MODEL: ASD1 ASD1 SPECIFICATIONS ES-1610 Rev.11 Page 3/4 http://www.m-system.co.jp/ EXTERNAL VIEW Monitor LED

• Output 1 Setpoint Adj.9 9 Setpoint Adj.
• Output 2 9 9 Monitor LED Deadband & Latching Control Deadband & Latching Control EXTERNAL DIMENSIONS unit: mm (inch) 80 (3.15) 132 (5.20) (.79)
• When mounting, no extra space is needed between units. 5678 2111 10 [3.3 (.13)] 80 (3.15) 40 (1 .57) 50 (1 .97) 7 .8 (.31) CLAMP (top & bottom) DIN RAIL 35mm wide2–4.5 (.18) dia. MTG HOLE 25 (.98) deep 11 –M3.5 SCREW TERMINAL ASSIGNMENTS unit: mm (inch) 2111 10 12 (.47) INPUT RESISTOR (model: REM) Input shunt resistor attached for current input.

MODEL: ASD1 ASD1 SPECIFICATIONS ES-1610 Rev.11 Page 4/4 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM LOAD Inductive Load (Coil) Varistor or Spark Quenching Circuit

• DC Powered LOAD Inductive Load (Coil) Diode, Varistor or CR Circuit ■ Relay Protection
• AC Powered U Base Socket U V POWER Digital Computation Circuit

5 Low Drift

*Input shunt resistor attached for current input. N.C. N.O. COM N.C. N.O. COM *INPUT R THUMBWHEEL SWITCHES DEADBAND & LATCHING CONTROL DEADBAND & LATCHING CONTROL 9 9 THUMBWHEEL SWITCHES 9 9 Specifications are subject to change without notice.