ASD05H_16 ASTRODYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Isolated and Regulated 5 WATT Open Frame DC/DC Converter ASD05H series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458WWW.ASTRODYNETDI.COM Unit measures 1”W x 2”L x 0.41”H Wide 4:1 Input Range 9 to 36V or 18 to 75V Available High Efficiency Regulated Outputs 1500VDC Isolation Integral Finned Heatsink EN60950-1 & UL60950-1 Approved Model Number Output Voltage Output Amps Input Range SINGLE OUTPUT ASD05H-12S3 3.3 VDC 1.5 9-36VDC ASD05H-48S3 1.5 18-75VDC ASD05H-12S5 5 VDC 1 9-36VDC ASD05H-48S5 1 18-75VDC ASD05H-12S9 9 VDC 0.55 9-36VDC ASD05H-48S9 0.55 18-75VDC ASD05H-12S12 12 VDC 0.42 9-36VDC ASD05H-48S12 0.42 18-75VDC ASD05H-12S15 15 VDC 0.33 9-36VDC ASD05H-48S15 0.33 18-75VDC DUAL OUTPUT ASD05H-12D5 ±5 VDC ±0.5 9-36VDC ASD05H-48D5 ±0.5 18-75VDC ASD05H-12D12 ±12 VDC ±0.21 9-36VDC ASD05H-48D12 ±0.21 18-75VDC ASD05H-12D15 ±15 VDC ±0.17 9-36VDC ASD05H-48D15 ±0.17 18-75VDC

Isolated and Regulated 5 WATT Open Frame DC/DC Converter ASD05H series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458WWW.ASTRODYNETDI.COM INPUT SPECIFICATIONS Input Voltage, Nominal 12VDC 48VDC Input Voltage Ranges 9-36 18-75 VDC Input Surge Voltage 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Preset Accuracy Single: +/- 3% max. Duals: +/- 4% max. Cross Regulation (Duals) 5-8% typ. Load Regulation single: +/- 0.5% 20% - FL duals: +/-1%, +/-3% (5V mod) Line Regulation single: +/- 0.5% duals: +/- 1% Minimum Load 5% of Full Load Ripple/Noise (Pk-Pk, typ) (Note 1) Single 3.3V 150mV Single 5V 100mV (12Vin), 150mV (48Vin) Single 9,12 50mV (12Vin), 100mV (48Vin) Single15V 50mV Dual 5V 150mV Dual 12, 15V 50mV Overvoltage Protection Clamp, 130-150% * Short Circuit Protection Clamp, need to release load GENERAL SPECIFICATIONS On/Off Control (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF Shutdown Idle Current 15mA Input-Out Isolation 1500VDC (48V)

500 VDC (12V)

In/Out Capacitance 1000 pF Efficiency at nom. Input 12V: 72%-83%, typ. 48V: 69%-80%, typ. ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -25 to +71°C(FL) Relative Humidity 0 to 95%, non-cond Storage Temperature -40 to +125°C * Maximum Heatsink Temp 110°C * MTBF 1,000,000 Hrs Mil Std 217, 25°C Shock/Vibration To MIL-STD 810°C Safety UL/cUL: UL60950-1 2nd ed./ CAN/CSA C22.2 60950-1 2nd ed. UL-EU: EN60950-1 2nd ed. PHYSICAL SPECIFICATIONS Heatsink Material Aluminum Construction Open Frame Weight 0.57 oz, (16g) NOTES 1. Ripple & Noise is measured by using a 20MHz bandwidth oscilloscope and terminating the output with a 47uF electrolytic capacitor paralleled with a 0.1uF ceramic capacitor. * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted

Isolated and Regulated 5 WATT Open Frame DC/DC Converter ASD05H series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458WWW.ASTRODYNETDI.COM OUTPUT DERATING CURVE MECHANICAL DIMENSIONS 120 100 0 10 20 30 40 50 60 70 80 90 Ambient Temp °C Output Power (%) 2.54mm .10in 15.24mm .60in 10.16mm .40in15.24mm .60in 35.56mm 1.40in 2.54mm .10in 12.7mm .50in 22.86mm .90in 10.52mm max .41in 6.0mm min .24in 25.4mm 1.00in 50.8mm 2.00in Pin# Single Outputs Dual Outputs + Input - Input + Output N / A - Output Control + Input - Input + Output Common - Output Control TOLERANCES : .XX 0.5mm(0.02in) : .XXX 0.25mm(0.01in) ASD10H_B B the Noumenon Change height from 9.52 to 10.52mm 2012/10/29 1 : 1 Erica ASD10H 2D outline drawings REV DRAWING NO. DESCRIPTION DATE SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) PIERCING BENDING ANGULAR 300<X<800 25<X<100 8<X<25 ±0.1 ±0.1 ±0.15 ±0.2 ±0.3 ±0.25 ±0.2 ±0.15 ±1° APPROVED CHECKED DRAWN Projection SCALE UNIT MODEL NO. PART NO. MATERIAL TITLE mm 100<X<300 ±0.5° ±0.3 ±0.5 ±1.5° ±0.5° ±0.3°X<8 DIMENSION SHEET OF SIZE A4 2915