ASC0402-100RF1 RIEDON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com SPECIFICATIONS - STANDARD Package Size Power Rating (W) at 70°C Operating Temperature Range MAX Operating Voltage 1 MAX Overload Voltage 2 Resistance Range TCR PPM/°C ±0.5% ±1% ±5% 0201 0.05 -55 to +125 25V 50V - 1Ω - 10MΩ ±200 0402 0.0625 -55 to +155 50V 100V 1Ω - 9.76Ω 10 Ω - 1MΩ 1.02MΩ - 10MΩ ±200 ±100 ±200 0603 0.100 50V 100V 1Ω - 9.76Ω 10 Ω - 1MΩ 1.02MΩ - 10MΩ ±200 ±100 ±200 0805 0.125 150V 300V 1Ω - 9.76Ω 10 Ω - 1MΩ 1.02MΩ - 10MΩ ±200 ±100 ±200 1206 0.250 200V 400V 1Ω - 9.76Ω 10 Ω - 1MΩ 1.02MΩ - 10MΩ ±200 ±100 ±200 1210 0.333 200V 400V 1Ω - 9.76Ω 10 Ω - 1MΩ 1.02MΩ - 10MΩ ±200 ±100 ±200 2010 0.750 200V 400V 1Ω - 9.76Ω 10 Ω - 1MΩ 1.02MΩ - 10MΩ ±200 ±100 ±200 2512 1 250V 500V 1Ω - 9.76Ω 10 Ω - 1MΩ 1.02MΩ - 10MΩ ±200 ±100 ±200 ASC Series

  • Resistances from 1 Ohm to 10M Ohms
  • Power Rating 0.05 to 1 Watt
  • Resistance Tolerances to ± 0.5%
  • TCR’s to ±200 ppm/°C
  • Sizes: 0201/0402/0603/0805/1206/2010 /2512
  • Anti-Sulfur Construction
  • AEC-Q200 Certifi ed Anti-Sulfur Thick Film Chip Resistor 1 Operating Voltage = or MAX Listed, whichever is lower. 2 Overload Voltage = 2.5 * or MAX Listed, whichever is lower. ( P * R ) ( P * R )

Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com Recommended Land Pattern (mm) Type A B C 0201 0.30 0.25 0.30 0402 0.50 0.45 0.60 0603 0.90 0.60 0.90 0805 1.20 0.70 1.30 1206 2.00 0.90 1.60 1210 2.00 0.90 2.80 2010 3.80 0.90 2.80 2512 3.80 1.60 3.50 ASC Series Anti-Sulfur Thick Film Chip Resistor A B C Power ratio (%) Ambient Temperature ( °C ) 100 0 20 40 60 80 100 120 140 160 Derating Curve 0402-2512 0201 L W Recommended Land Pattern Alumina Substrate Edge Electrode Resistor Layer Bottom Electrode Barrier Layer Primary Overcoat Top Electrode External Electrode Secondary Overcoat Size L (mm) W (mm) T (mm) (mm) (mm) Weight* (g) * Weight based on 1,000 pcs

Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com Environmental Characteristics Test Requirement Conditions ±1% and Below ±5% TCR As Spec. -55°C to +125, +25°C is reference temperature Short Time Overload ±(1%+0.05Ω) ±(2%+0.05Ω) RCWV*2.5 or Max. overload voltage for 5 seconds, 2 seconds for high power series Insulation Resistance >10 GΩ Max. Overload for 1 minute Endurance ±(2%+0.10Ω) ±(3%+0.10Ω) 70 ± 2°C, RCWV for 1000 hrs w/ 1.5 hrs “ON” and 0.5 hrs “OFF” Damp Heat with Load ±(2%+0.10Ω) ±(3%+0.10Ω) RCWV for 1000 hrs w/ 1.5 hrs “ON”and 0.5 hrs “OFF” Dry Heat ±(1%+0.05Ω) ±(1.5%+0.10Ω) at +125/+155°C for 1000 hrs Bending Strength ±(1%+0.05Ω) ±(1%+0.05Ω) Bending once for 5 seconds 2010,2512 sizes: 2 mm other sizes: 3 mm Solderability Terminal Finish = Nickel Tin 95% min. coverage 245±5°C for 3 seconds Resistance to Soldering Heat ±(0.5%+0.05Ω) ±(1%+0.05Ω) 260±5°C for 10 seconds Voltage Proof No breakdown or fl ashover 1.42 times Max. Operating Voltage for 1 minute Leaching Individual leaching area ≤ 5% Total leaching area ≤ 10% 260±5°C for 30 seconds Rapid Change of Temperature ±(0.5%+0.05Ω) ±(1%+0.05Ω) -55°C to +125/+155°C, 5 cycles rating for 1000 hrs ASC Series Anti-Sulfur Thick Film Chip Resistor 1 Operating Voltage = or MAX Listed, whichever is lower. 2 Overload Voltage = 2.5 * or MAX Listed, whichever is lower. ( P * R ) ( P * R )

Ordering Information

Part Description: Part Type - Package Size- Resistance - Tolerance - TCR - HP option Example: ASC0402 50 Ohms 0.05% 100ppm HP (Note: if no TCR is specifi ed: The highest value will be supplied) RCWV(Rated Continuous Working V oltage) = √(P*R) or Max. Operating V oltage chichever is lower SPECIFICATIONS - HIGH POWER RATING Package Size Power Rating (W) at 70°C MAX Operating Voltage 1 MAX Overload Voltage 2 Resistance Range TCR PPM/°C 1% 5% 0402 HP 0.100 50V 100V 1Ω - 9.76Ω 10 Ω - 1M Ω ±200 ±100 0603 HP 0.125 50V 100V 0805 HP 0.25 150V 300V 1206 HP 0.333 200V 400V 1210 HP 0.500 200V 400V

2010 HP 1 200V 400V

Note: High Power option not AEC-Q200 Qualifi ed