RES-AS-SMD OHMITE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com6 AS Series Anti-surge Thick Film Chip Resistors FeA tureS
- Small size and light weight
- Suitable for both wave and reflow soldering
- Can withstand high surge
- Reduction of assembly costs SerieS SpeciFicA tionS chArActeriSticS Power Max Max Dielectric Rating Working Overload Withstanding Resistance Type at 70°C Voltage Voltage Voltage Range AS08 (0805) 0.33W 150V 300V 500V 1Ω~10MΩ AS12 (1206) 0.5W 200V 400V 500V 1Ω~10MΩ AS25 (2512) 1.5W 500V 500V 500V 1Ω~20MΩ Std. Oper. Temp. -55°C ~ +155°C Standard Values E-24 values Construction Thick film Tolerance ±5% standard; ±10% and ±20% available Derating Reflow 100Percent Rated Power Ambient Temperature, °C 05 0 100 15570-55 300 Temperature °C Time Preheating 150° ~ 180° 90 ±30sec. Soldering Cooling 200 250 100 150 230° ~ 245°/250° 20 ±10sec. Test ΔR Test Methods (JIS C 5201-1 ) Temperature Coefficient 1Ω-10Ω: ≤ ±400PPM/°C (±200 PPM can be provid- ed on a case to case basis) 11Ω-10MΩ: ≤ ±100PPM/°C Natural ΔR/°C R2-R1 x 106 (PPM/°C)R1(t2-t1) R1: at room temp. (T1) R2: at room temp. plus 100°C (T2) Test pattern: room temp. (T1), room temp. +100°C(T2) Short Time Overload ±(1.0% + 0.1Ω) max. Permanent ΔR after the application of a potential of 2.5 times RCWV for 5 sec. Terminal Bending ±(1.0% + 0.05Ω) max. Twist of Test Board: Y/X = 3/90 mm for 60 sec. Soldering Heat ±(1.0% + 0.05Ω) max. 260°C±3°C for 10 ±1 sec. Single Pulse ±(1.0% + 0.1Ω) max. See graph on next page. Humidity ±(3.0% + 0.1Ω) max. Temporary ΔR after 240 hr. at 40 ±2°C and 90-95% relative humidity Load Life in Humidity "off" ) at RCWV at 40 ±2°C and 90-95% relative humidity Load Life ±(3.0% + 0.1Ω) max. ΔR change after 1,000 hr. operat- ing at RCWV , with duty cycle of (1.5 hours"on", 0.5 hour"off") at 70°C ±2°C ambient Solderability Min. 95% coverage Wave Solder: 245°C ±3°C for 2-3 sec. Temperature Cycling ±(1.0% + 0.05Ω) max. ΔR after 5 cycles: -55°C ±3°C 30 min. Room temp. 10-15 min. +155°C ±2°C 30 min. 4 Room temp. 10-15 min. Dielectric withstanding voltage No evidence of flashover, mechanical damage, arcing or insulation breakdown Clamped in the trough of a 90°C metal- lic v-block at specified AC potential 60-70 sec.
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 7 chArActeriSticS AS Series Anti-surge Thick Film Chip Resistors Series L W H a b Series Packaging Qty./reel A B T W AS08 Paper 5,000 pcs. 1.65 2.40 0.81 10 AS12 Paper 5,000 pcs. 2.00 3.60 0.81 10 DimenSionS (mm) orDerinG inFormA tion Standard Part Numbers Tape and Reel 0805 AS08J1R00ET AS08J10R0ET AS08J1000ET AS08J1001ET AS08J1002ET AS08J1003ET AS08J1004ET 1206 AS12J1R00ET AS12J10R0ET AS12J1000ET AS12J1001ET AS12J1002ET AS12J1003ET AS12J1004ET 2512 AS25J1R00ET AS25J10R0ET AS25J12R0ET AS25J15R0ET AS25J22R0ET AS25J1000ET AS25J1001ET AS25J1002ET AS25J1003ET AS25J1004ET a a b b Pulse Curve Lightning Surge 178 ±2 60 ±1 13 ±.5 2 ±.5 W ±121 ±.5 A ±.2 B ±.2 3.5 ±0.05 4.0 ±.1 8.0 ±.2 Paper Embossed 2.0 ±.05 A ±.2 B ±.2 1.5 +0.1/-0 1.75 ±.1 3.5 ±0.05 4.0 ±.1 8.0 ±.2 2.0 ±.05 AS08J1004ET RoHS compliant Ohms First 3 digits are significant; 4th digit is multiplier. Values below 100 ohms use "R" as a decimal holder. examples: 1001 = 1000 ohms 1502 = 15000 ohms Tolerance J = 5% standard for E24 values Series AS08= 0805 AS12= 1206 AS25= 2512 TCR T= tape and reel: 0805 and 1206 paper tape; 2512 embossed tape. Single AS25 AS12 AS08 AS25 AS12 AS08 Continuous (100K/uni03A9) AS25 AS12 AS08 1.2/50µs Lightning Surge Resistance (Ω) Voltage (V) 10,000 1,000 100 1 10 100 1K 10K 1M100K