AS11AP NKK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS Distinctive Characteristics Subminiature size (1/3 size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Available in various actuator lengths. Antistatic superstructure of carbon blended polyacetal prevents static discharge to the contacts. Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M. Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 50 milliohms maximum Insulation Resistance: 500 megohms minimum @ 500V DC Dielectric Strength: 500V AC minimum for 1 minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 50,000 operations minimum Nominal Operating Force: 2.55N Contact Timing: Nonshorting (break-before-make) Materials & Finishes Actuator: Glass fiber reinforced polyamide Upper Case Housing: Carbon blended polyacetal (antistatic) Lower Case Housing: Glass fiber reinforced polyamide Support Bracket: Tin plated phosphor bronze Movable Contact: Phosphor bronze with gold plating Stationary Contacts: Brass with gold plating Terminals: Brass with gold plating Environmental Data Operating Temperature Range: –30°C through +85°C (–22°F through +185°F) Humidity: 90 ~ 95% humidity for 192 hours @ 40°C (104°F) Vibration: 10 ~ 60Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 30 minutes Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: for single pole see Profile B in Supplement section; for double pole see Profile A. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications UL Recognition or CSA Certification: The A Series slides have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS POLES

1 SPST

2 DPDT

TYPICAL SWITCH ORDERING EXAMPLE

2 HAS

Slide Position Connected Terminals Throw & Schematics Pole Model Left Center Right Left Center Right Note: Terminal numbers are not actually on the switch. SP AS11 ON NONE OFF 3-1 OPEN OPEN SPST SP AS12 AS13 ON ON NONE OFF ON ON 2-1 2-1 OPEN OPEN 2-3 2-3 SPDT DP AS22 AS23 ON ON NONE OFF ON ON 2-1 5-4 2-1 5-4 OPEN OPEN 2-3 5-6 2-3 5-6 DPDT CIRCUITS

1 ON NONE OFF

2 ON NONE ON

3 ON OFF ON

4 ON ON ON

DESCRIPTION FOR TYPICAL ORDERING EXAMPLE AS22AH POLES & CIRCUITS A ACTUATORS A .098” (2.5mm) Long B Flush C .150” (3.8mm) Long PC TERMINALS P Straight B Straight with Bracket H Right Angle with Bracket V Vertical with Bracket Bracketed models are ESD protected .098” (2.5mm) Long Actuator INTERNAL CONNECTION 1 3 4 6 2 5 (COM) For 3 Throw (3-On) Connected Terminals & Schematics External Connection Pole Model Left Center Right The SP3T model utilizes a double pole base. External connections must be made during field installation. SP AS24 ON 2-1 5-4 ON 2-3 5-4 ON 2-3 5-6 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 2 (COM) 3 6 2 5 Common (in) (out) (out) (out) External Conn1 (out) 4 (out) 6 (out) 2 (in) External Connection

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS (2.4) .094 (2.4) .094 (2.5) .098 (2.4) .094 (2.4) .094 (3.8) .150 (2.4) .094(2.4) .094 ACTUATORS Use of a support bracket is recommended to increase PCB mounting strength and stability. TYPICAL SWITCH DIMENSIONS Straight PC Single Pole AS12AP Actuator shown in LEFT position Single throw models do not have terminal 2. Flush Actuator Color: Gray standard; contact factory for other colors. A B C Straight Straight with BracketP B Right Angle with BracketH Vertical with BracketV (2.54) Typ .100 (0.6) Dia Typ .024 (5.08) Typ .200 (0.8) .031 (8.8) .346 (9.0) .354 (5.08) .200 (5.08) .200 (10.16) .400 (9.0) .354 (8.8) .346 (2.54) Typ .100 (0.3) Typ .012 (0.7) Typ .028 (0.6) Dia Typ .024 (5.08) .200 (5.08) .200 (2.54) Typ .100 (0.3) .012 (0.7) .028 (9.0) .354 (8.8) .346 (0.6) Dia Typ .024 (0.5) Typ .020 (9.0) .354 (2.54) Typ .100 (2.54) Typ .100 (5.08) .200 (0.6) Dia Typ .024 (8.8) .346 (0.5) .020 (0.7) .028 (0.3) .012 Straight PC Double Pole AS12AB Actuator shown in LEFT position .150” (3.8mm) Long.098” (2.5mm) Long AS22AP Actuator shown in LEFT position Straight PC • Bracket Single Pole (9.1) .358 (2.06) .081 (2.54) Typ .100 (2.5) Travel .098 (0.6) Dia Typ .024 (2.5) .098 (3.1) .122 (0.8) .031 P/N This Side (9.8) .386 (1.0) .039 CL (2.4) Sq .094 (0.4) Typ .016 (0.3) .012 (5.38) .212 (9.8) .386 (5.08) .200 (9.1) .358 (2.06) .081 (2.54) Typ .100 (2.5) Travel .098 (0.6) Dia Typ .024 (2.5) .098 (3.1) .122 (0.8) .031 P/N This Side (9.2) .362 (0.4) .016 (0.4) Typ .016 (2.4) Sq .094 (9.8) .386 (0.7) Typ .028 (1.0) .039 (2.54) .100CL (10.16) .400 (9.1) .358 (2.06) .081 (0.3) Typ .012 (0.6) Dia Typ .024 (2.54) Typ .100 (3.1) .122 (0.8) .031 (2.5) .098 (2.5) Travel .098 P/N This Side (0.3) .012 (5.7) .224 (2.4) Sq .094 (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (0.8) Dia Typ .031 5 2 (2.54) Typ .100 (5.08) .200 2 (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (2.54) .100 PC TERMINALS

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS TYPICAL SWITCH DIMENSIONS Right Angle PC Double Pole Right Angle PC Single Pole Vertical PC Single Pole AS22AB Actuator shown in LEFT position AS12AH Actuator shown in LEFT position AS22AH Actuator shown in LEFT position AS22AV Actuator shown in LEFT position Vertical PC Double Pole AS12AV Actuator shown in LEFT position (9.8) .386 (0.7) Typ .028 (5.08) .200 (10.16) .400 (9.1) .358 (2.06) .081 (0.3) Typ .012 (0.6) Dia Typ .024 (2.54) Typ .100 (3.1) .122 (0.8) .031 (2.5) .098 (2.5) Travel .098 P/N This Side (9.5) .374 (0.4) .016 (2.4) Sq .094 5 2 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 (5.08) .200 (0.8) Dia Typ .031 2 31 (2.54) Typ .100 (5.08) .200 64 5 2 31 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100 (2.54) Typ .100 (0.8) Dia Typ .031 (1.0) .039 CL (2.54) .100 5 2 1 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 (5.08) .200 (2.5) Travel .098 (2.06) .081 (2.4) Sq .094 (0.3) .012 (9.8) .386 (5.08) .200 (0.3) Typ .012 (9.9) .389 (0.7) .028 (0.8) .031 (3.3) .131 (3.1) .122 (5.08) .200 (2.5) .098 P/N This Side (6.18) .2433 2 1 (0.6) Dia Typ .024 (2.54) Typ .100 (10.0) .394 3 2 1 6 5 4 (0.6) Dia Typ .024 (2.54) Typ .100 (12.4) .489 (0.8) .031 (0.7) .028 (0.5) .020 (5.2) .205 (2.54) .100 (5.08) .200 (3.1) .122 (2.5) .098 P/N This Side (5.08) .200 (2.06) .081 (0.4) .016 (2.4) Sq .094 (2.5) Travel .098 (9.8) .386 (0.3) Typ .012 (1.0) .039 CL (0.6) Dia Typ .024 (10.2) .402 (15.0) .589 (2.06) .081 (2.54) .100 (2.54) .100 (2.54) Typ .100 (2.5) Travel .098 (0.8) .031 (5.3) .208 (0.5) .020 (3.1) .122 (1.0) .039 (2.5) .098 P/N This Side(2.4) Sq .094 (0.7) Typ .028 (0.3) Typ .012 (0.4) .016 (5.7) .224 (2.54) .100 (5.08) .200 (0.7) .028 (15.0) .589 (2.06) .081 (2.54) Typ .100 (0.8) .031 (5.3) .208(2.5) Travel .098 (2.5) .098 (1.0) .039 (0.5) .020 (3.1) .122 P/N This Side (9.5) .374 (5.08) .200 (0.3) Typ .012 (2.4) Sq .094 (0.4) .016 (10.2) .402 (5.08) .200 (0.6) Dia Typ .024 Straight PC • Bracket Double Pole