AS212-93

AS212-93 SKYWORKS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

■ Four Inputs, Two Output Switches ■ Any Input Can Be Directed To Either Output ■ Only Requires 4 Control Lines ■ Low DC Power Consumption ■ Small Low Cost TSSOP-16 Plastic Package ■ High Isolation Between Ports Applications: ■ DBS Switching Applications, Cable Modems, Cable TV TSSOP-16 AS212-93 R 0.004 (0.09 mm) MIN. 0.010 (0.25 mm) 0˚–8˚A A 0.024 (0.60 mm) ± 0.006 (0.15 mm) 0.252 (6.4 mm) BSC 0.173 (4.40 mm) ± 0.004 (0.10 mm) 0.197 (5.00 mm) ± 0.004 (0.10 mm) 0.035 (0.90 mm) + 0.006 (0.15 mm)/ -0.004(-0.10 mm) 0.047 (1.20 mm) MAX. 0.006 (0.15 mm) MAX. 0.002 (0.05 mm) MIN. 0.009 (0.22 mm) REF . PIN 16 PIN 1 INDICATOR PIN 1 0.0256 (0.65 mm) BSC EXPOSED PAD 0.118 (3.0 mm) MAX. 0.118 (3.0 mm) MAX.

Description

The AS212-93 is an IC FET 4 x 2 matrix switch in a low cost TSSOP-16 exposed paddle plastic package. The exposed paddle should be grounded. The AS212-93 enables 16 states directing any of the four inputs to any of the two outputs. DC block capacitors are required at Parameter1 Frequency Min. Typ. Max. Unit Insertion Loss 0.70–0.95 6.50 7.00 dB 0.95–1.45 6.50 7.00 dB 1.45–2.15 6.75 7.30 dB 2.15–3.00 7.00 7.50 dB Insertion Loss Flatness 0.70–3.00 1.0 2.0 dB Isolation 0.70–0.95 25.0 33.0 dB 0.95–1.45 23.0 28.5 dB 1.45–2.15 22.5 28.5 dB 2.15–3.00 19.5 25.5 dB Return Loss Insertion Loss State 0.70–3.00 9 11 dB Return Loss Isolation State 0.70–3.00 9 11 dB Electrical Specifications at 25°C (0, +5 V) 1. All measurements made in a 50 Ω system. Parameter Condition Min. Typ. Max. Unit P-1 dB 0, +5 V 12 dBm VCC @ 400 µA Max. 4.5 5.5 V Control Voltages V1, V2, V3, V4 Low @ 50 µA Max. 0 0.2 V High @ 50 µA Max. 2.5 V CC V Operating Characteristics at 25°C (0, +5 V) each RF port. States are selected by 4 positive controls. All ports are absorptive.The AS212-93 switch is suitable for DBS switching applications.

2 Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email sales@skyworksinc.com • www.skyworksinc.com Specifications subject to change without notice. 12/02A GaAs IC 4 x 2 Switch Matrix 0.7–3.0 GHz AS212-93 Characteristic Value RF Input Power 15 dBm Supply Voltage +6 V Control voltage +6 V Operating Temperature -40 to +85°C Storage Temperature -65 to +150°C Absolute Maximum Ratings Note: Exceeding these parameters may cause irreversible damage. Loss (dB) Frequency (GHz) Typical Insertion Loss (Various States Shown) -10 Return Loss S11 and S22 (dB) Frequency (GHz) Return Loss Insertion Loss State -50 -45 -40 -35 -30 -25 -20 -15 -10 Return Loss S11 and S22 (dB) Frequency (GHz) Return Loss Isolation State -50 -45 -40 -35 -30 -25 -20 -15 -10 Isolaiton (dB) Frequency (GHz) Typical Isolation (Including Worst Case) -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 Typical Performance Data (0, +3 V)

Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email sales@skyworksinc.com • www.skyworksinc.com 3 Specifications subject to change without notice. 12/02A GaAs IC 4 x 2 Switch Matrix 0.7–3.0 GHz AS212-93 LO RO VCC GND GND GND GND GND I1I2 1 23456 8 16 15 14 13 12 11 9 Pin Out Controls For LO For RO (Left Output) (Right Output) Signal Path (Insertion SW SW SW SW State # Loss Path) 1 A1 A2 B1 B2

0 I1->LO & I1->RO 0 0 0 0

1 I1->LO & I2->RO 0 0 0 1

2 I1->LO & I3->RO 0 0 1 0

3 I1->LO & I4->RO 0 0 1 1

4 I2->LO & I1->RO 0 1 0 0

5 I2->LO & I2->RO 0 1 0 1

6 I2->LO & I3->RO 0 1 1 0

7 I2->LO & I4->RO 0 1 1 1

8 I3->LO & I1->RO 1 0 0 0

9 I3->LO & I2->RO 1 0 0 1

10 I3->LO & I3->RO 1 0 1 0

11 I3->LO & I4->RO 1 0 1 1

12 I4->LO & I1->RO 1 1 0 0

13 I4->LO & I2->RO 1 1 0 1

14 I4->LO & I3->RO 1 1 1 0

15 I4->LO & I4->RO 1 1 1 1

Unused leads and package bottom should be well grounded. All paths are bidirectional. 1. All other paths are in isolation. “1” = 5 V. “0” = 0 V. Bias V CC before applying bias to control lines. Control lines need to be grounded for “0 V”. Control lines can not be left open circuit. Control A1 GND Back of Board Control B1 SK39616 In2 In4 LO REV 2 In3 Control A2 A2 B1 In1 VCC RO Control B2 VCC Test Board

4 Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email sales@skyworksinc.com • www.skyworksinc.com Specifications subject to change without notice. 12/02A GaAs IC 4 x 2 Switch Matrix 0.7–3.0 GHz AS212-93 ALPHA INDUSTRIES 17540 SMP1307-994 REV. A WAFER-MULTI DATE CODE-9903 QTY. 3000 CUST. P/N- 1338-140-000 CAUTION STATIC SENSITIVE DEVICES MADE IN U.S.A. 431 Cover Tape Carrier Tape Label Reel P0P1 8˚ MAX. A0 B0 WF T1 (Cover Tape Thickness) K0 5˚ MAX. T (Carrier Tape Thickness) Tape Dimensions Description Symbol TSSOP-16 Cavity Length A 0 0.80±0.10 Width B 0 5.40±0.10 Depth K 0 1.60±0.10 Pitch P 1 8.00±0.10 Bottom Hole D 1 1.60±0.10 Diameter Perforation Diameter D 0 1.50±0.10 Pitch P 0 4.00±0.10 Position E 1 1.75±0.10 Carrier Tape Width W 12.0±0.30 Thickness T 0.30±0.05 Cover Tape Width W 1 9.20±0.10 Tape Thickness T 1 0.062±0.01 Distance Cavity to F 7.50±0.10 Perforation (Width Direction) Cavity to P 2 2.00±0.1 Perforation (Length Direction) Note: All dimensions are in mm. SOIC, MSOP, QSOP, SSOP and TSSOP Devices 8, 10, 14, 16, 20, 28 Leads User Direction of Feed Pin 1 Standard Reel Size 7" 13" Standard Reel Quantity 1,000 3,000