ARGP10D TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen High temperature metallurgically bonded constructed /cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-0 /cuspopen Glass passivated cavity-free junction /cuspopen High maximum operating temperature /cuspopen Low leakage current /cuspopen Excellent stability /cuspopen Guaranteed avalanche energy absorption capab ility /cuspopen High temperature soldering guaranteed: 3 5 0 oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs., (2.3kg) tension. Mechanical Data /cuspopen Case: JEDEC DO-41 molded plastic over glass body /cuspopen Lead: Plated Axial leads, solderable per MIL-STD-750, Method 2026 /cuspopen Polarity: Color band denotes cathode end /cuspopen Mounting position: Any /cuspopen Weight: 0.012 ounce, 0.3 gram DO-41 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 ℃ambient temperature unless otherwise specified. Type Number Symbol ARGP 10D ARGP 10G ARGP 10J ARGP 10K ARGP 10M Units Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 800 1000 V Maximum RMS Voltage VRMS 140 280 420 560 700 V Maximum DC Blocking Voltage VR 200 400 600 800 1000 V Min. Reverse Avalanche Breakdown Voltage @ IR=0.1mA V(BR)R 300 500 700 900 1100 V Maximum Average Forward Rectified Current .375” (9.5mm) Lead Length @ T tp = 55 ℃ IF(AV) 1.3 A Peak Forward Surge Current @ t= 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) @ t=10ms half sine wave, Tj=Tjmax prior to surge, VR=V RRM max IFSM A A Non- repetitive Peak Reverse Avalanche Energy L=120mH Tj=125 ℃ max prior to Surge, Inductive load Switched off ERSM 10 7 mJ Maximum Instantaneous Forward Voltage @ IF= 1.0A @ IF=1A, Tj=Tj max. VF 1.3 1.1 V V Maximum DC Reverse Current @ T J=25 ℃ at Rated DC Blocking Voltage @ T J=165 ℃ IR 1.0 100.0 uA uA Maximum Reverse Recovery Time ( Note 1 ) T J=25 ℃ Trr 250 300 nS Typical Junction Capacitance ( Note 2 ) Cj 15.0 pF Typical Thermal Resistance (Note 3) RθJA RθTP 120 OC/W Operating Temperature Range T J TJ -65 to + 175 OC Storage Temperature Range T STG TSTG -65 to + 175 OC 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts. 3. Mount on Cu -Pad Size 5mm x 5mm on P.C.B.
- 583 - FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (ARGP10D THRU ARGP10M) FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method FIG.4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 1 10 100 100 REVERSE VOLTAGE. (V) Tj=25 C0 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 FORWARD VOLTAGE. (V) Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 25 50 75 125 175 150100 0.25 0.75 1.0 0.5 TIE POINT TEMPERATURE. ( C) o 0.375" (9.5mm) LEAD LENGTH FIG.6- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT MICROAMPERES 0 20 40 60 80 100 120 140 0.1 0.01 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=125 C0 Tj=75 C0 Tj=25 C0 1.25 1.5 RESISTIVE OR INDUCTIVE LOAD