AR5 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

www.sensata.com Copyright © 2022 Sensata Technologies, Inc. | AR5 Analog Rocker SPECIFICATIONS Main Features Introduction Custom Modifications

  • Contactless sensing – Hall effect
  • Rocker life > 2 million cycles
  • Optional:
  • detent, life > 200K cycles
  • latching, life > 100K cycles
  • Single sensor – optional second sensor for redundancy
  • Integrated temperature compensation
  • Short circuit protection
  • Ideal solution for fingertip rocker designs
  • Potted electronics The AR5 Analog Rocker has been developed to provide the reliability required in demanding environments - such as dashboards or armrest controls - for heavy duty industrial and off-road applications. The unique design makes the rocker module an ideal proportional function solution for off-road machinery for cost-effective custom designs. The AR5 has been designed to simplify the customization of fingertip rockers in an off-road vehicle application.
  • Deflection angle
  • Detent / Latching detent
  • Lever design allows for usage of longer levers
  • Connector / Harness Supply Ratings Voltage range DC current 9V … 30V or 5.0 V ± 5% 50 mA at 24V Voltage Output Output 1 Output 2 (A) 0.5V … 4.5V at 5Vcc 4.5V … 0.5V at 5Vcc Output proportional to Vcc Pull-down resistor Recommendation 4.7 kΩ Output current max. 1 mA Other electrical Characteristics EMI > 100 V/m Electrical

www.sensata.com Page 2 Copyright © 2022 Sensata Technologies, Inc. DIMENSIONS Life - rocker - detent - latching > 10 million cycles (equivalent > 20 million movements) > 200k cycles > 100k cycles Operating temperature - Storage - Working - 40°C to 85°C - 40°C to 85°C Operating force 4-6 N Vertical load maximum 30 N Protection Level IP 67 Rocker deflection angle ± 40° max. Mechanical

www.sensata.com Page 3 Copyright © 2022 Sensata Technologies, Inc. PIN SIGNAL FUNCTION (9-30V) FUNCTION (5V)

1 UB (B) SUPPLY VOLTAGE NOT CONNECTED

2 GND REFERENCE GROUND REFERENCE GROUND

3 VCC (B) NOT CONNECTED SUPPLY VOLTAGE

4 OUT OUTPUT SIGNAL OUTPUT SIGNAL

5 OUT (B) OPTIONAL REDUNDANT OUTPUT SIGNAL OPTIONAL REDUNDANT OUTPUT SIGNAL

www.sensata.com Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. CONTACT US INDUSTRIAL SOLUTIONS DIVISION Americas +1 (800) 350 2727 sensors.deltatech@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 ost-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 HEAVY VEHICLE & OFF-ROAD DIVISION Americas +1 508 236 2196 products@sensata.com Europe, Middle East & Africa +49 30 43 999 0 products@sensata.com Asia Pacific products@sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7001 Korea +82 (31) 601 2004 Page 4 Copyright © 2022 Sensata Technologies, Inc. Rev:04/06/22 -/-: no latching D32/32: standard ± 32° latching Lx/x: customized ± x° latching ORDERING OPTIONS Example : AR5-S-40/40-xN-D26/26-L32/32-1-V-2-00 Lever Deflection Angle Family Detent (C) Latching (C) C: customized lever S: standard lever 40/40: ± 40° x/x: customized ± 0-40° (left/right) AR5: analog rocker 5 AR5 S 40/40 xN D26/26 1L32/32 -/-: no detent D26/26: standard ± 26° detent Dx/x: customized ± x° detent Operation Force xN: operation force depends on lever Electrical supply 0: voltage 9 ... 30 V 1: 5 V ± 5% Output V: voltage V 2 Output Voltage Code (D) (A) for redundant version (B) optional (C) detent and latching positions must been teached-in in application (D) ratiometric to 5V supply GENERAL NOTES Sensors 1: 1 sensor 2: 2 sensors (for redundancy)