AR3354S2 APMICRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

 Low capacitance: 1.5pF typical (I/O to I/O)  Ultra low leakage: nA level  Operating voltage: 3.3V  Low clamping voltage  Up to four I/O lines  Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-5 (Lightning) 22A (8/20μs)  RoHS Compliant AR3354S2 4-Line Low Capacitance TVS Diode Array Part Number Packaging Reel Size AR3354S2 3000/Tape & Reel 7 inch SRV33YYWW= Device Marking Code Circuit and Pin Schematic Dimensions and Pin Configuration Mechanical Characteristics  Package: SOT23-6L  Lead Finish: Matte Tin  Case Material: “Green” Molding Compound  Moisture Sensitivity: Level 3 per J-STD-020  Terminal Connections: See Diagram Below  Marking Information: See Below

Applications

 10/100/1000 Ethernet  Central Office Equipment  LVDS Interfaces  MagJacks/Integrated Magnetics  Notebook/Desktops/Service Marking Information

Ordering Information

All d ata sheet.com

Revision 12/2017 2 of 4 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power (8/20µs) Ppk 300 W Peak Pulse Current (8/20µs) IPP 22 A ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±30 ±30 kV Operating Temperature Range TJ −55 to +85 °C Storage Temperature Range TSTG −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 3.3 V Pin 5 to Pin 2 Punch-Through Voltage VPT 3.5 5.3 V IT = 2 μA, Pin 5 to Pin 2 Snap-Back Voltage VSB 2.8 V ISB = 50mA Reverse Leakage Current IR 0.5 µA VRWM = 3.3V, Pin 5 to Pin 2 Clamping Voltage VC 6 V IPP = 1A (8 x 20µs pulse), any I/O pin to ground Clamping Voltage VC 14 V IPP = 22A (8 x 20µs pulse), any I/ O pin to ground Junction Capacitance CJ 1.5 pF VR = 0V, f = 1MHz, between I/O pins Junction Capacitance CJ 3.0 5.0 pF VR = 0V, f = 1MHz, any I/O pin to ground AR3354S2 Note 1: I/O pins are Pin 1, 3, 4 and 5 All d ata sheet.com

Revision 12/2017 3 of 4 www.appliedpowermicro.com Typical Performance Characteristics (TA=25°C unless otherwise Specified) AR3354S2 Junction Capacitance vs. Reverse Voltage Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current Power Derating Curve

8 X 20μs Pulse Waveform

8 kV Contact per IEC61000−4−2 Note：Data is taken with a 10x attenuator Measured between I/O pins All d ata sheet.com

Revision 12/2017 4 of 4 www.appliedpowermicro.com AR3354S2 Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. Suggested Land Pattern X C P G Y Z SYM DIMENSIONS MILLIMETERS INCHES C 2.50 0.098 G 1.40 0.055 P 0.95 0.037 X 0.60 0.024 Y 1.10 0.043 Z 3.60 0.141 Contact Information Applied Power Microelectronics Co., Ltd. Website: http://www.appliedpowermicro.com Email: sales@appliedpowermicro.com Phone: +86 (0519) 8399 3606 SYM DIMENSIONS MILLIMETERS INCHES MIN NOM MAX MIN NOM MAX A 0.90 1.45 0.035 0.057 A1 0.00 0.15 0.000 0.006 b 0.25 0.50 0.010 0.020 c 0.08 0.22 0.003 0.009 E 2.80 BSC 0.110 BSC e 0.95 BSC 0.037 BSC e1 1.90 BSC 0.075 BSC N 6 6 aaa 0.10 0.004 ccc 0.20 0.008 A E E/2 e B ccc C 2X N/2 TIPS A D bxN aaa C All d ata sheet.com