AR2020 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Features
20 MP CMOS Sensor with Advanced 1.4 /C0109m Pixel Stacked BSI Technology Enhanced NIR Response at 850 nm and 940 nm Wavelength LI−HDR: Supports Line Interleaved T1/T2 Readout to Enable HDR Processing in ISP Chip enhanced Dynamic Range (eDR) In Sensor Scaler that Supports both Mono and Bayer RGB Version Super Low Power Mode (SLP) Wake On Motion (WOM)/Motion Detection Subsampling Modes: Skipping, Binning, Summing Data Interfaces: MIPI D−PHY − 2x4 Lanes Bit−depth Compression Available for MIPI Interface I2C Fast Mode+ Serial Interface Various Trigger Modes for Multi−sensor Synchronization Electronic Rolling Shutter (ERS) and Global Reset Release (GRR) Modes Supported Context Switching 1952 bytes One−time Programmable Memory (OTPM) for Storing Shading Correction Coefficients and Module Information Programmable Controls: Gain, Horizontal and Vertical Blanking, Frame Size/Rate, Exposure, Window Size, Cropping and Mirror and Flip On−chip Temperature Sensor with 5C accuracy On−chip Lens Shading Correction for RGB Bayer and Mono See detailed ordering and shipping information on page 3 of this data sheet.
ORDERING INFORMATION
Applications
Surveillance Camera Video Conferencing Machine Vision 3D and Stereo Imaging Request Full Data Sheet Non−NDA Data Sheet Interested in what you see? If you would like more detailed information, please request the full version of our data sheet. PBGA78 13x10.5 CASE 117CV
Table 1. KEY PERFORMANCE PARAMETERS Scaler Adjustable x− and y−scaling up to 32x, with 0.05% accuracy, for Bayer and Mono variant. SmartROI Support SmartROI feature that can send out two ROIs over different MIPI Virtual Channels.
- /C0113JA is dependent on the customer module design and should not be used for calculating junction temperature.
Table 2. MODES OF OPERATION 10−BIT NOTE: Contact your onsemi Field Applications Engineer for additional modes. Table 3. MODES OF OPERATION 12−BIT NOTE: Contact your onsemi Field Applications Engineer for additional modes. Table 4. ORDERING INFORMATION NOTE: Refer to AR2020 Die Data Sheet for Die Part Numbers & Ordering Information.
Figure 1. Block Diagram
XXXX = Specific Device Code Y = Year ZZZ = Lot Traceability *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “/C0071”, may or may not be present. Some products may not follow the Generic Marking. GENERIC MARKING DIAGRAM* PBGA78 13x10.5 CASE 117CV ISSUE O DATE 28 OCT 2021 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 98AON37510HDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1PBGA78 13x10.5 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. Semiconductor Components Industries, LLC, 2021 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales