AR0532P6 APMICRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Ultra small package: 1.6x1.0x0.75mm
- Ultra low capacitance: 0.3pF typical
- Ultra low leakage: nA level
- Operating voltage: 5V
- Low clamping voltage
- Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±25kV Contact discharge: ±25kV – IEC61000-4-5 (Lightning) 8A (8/20μs)
- RoHS Compliant 0532P = Device Marking Code Dot denotes Pin1 0532P All d ata sheet.com
Revision, 1 2 of 4 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power (8/20µs) Ppk 160 W Peak Pulse Current (8/20µs) IPP 8 A ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±25 ±25 kV Operating Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 3.3 5 V Breakdown Voltage VBR 6.5 9.5 V IT = 1mA Reverse Leakage Current IR 0.05 uA VRWM = 3.3V Reverse Leakage Current IR 0.2 uA VRWM = 5V Clamping Voltage VC 12 V IPP = 1A (8 x 20µs pulse) Clamping Voltage VC 20 V IPP = 8A (8 x 20µs pulse) Junction Capacitance CJ 0.3 0.4 pF VR = 0V, f = 1MHz,Pin 1 to Pin 2 AR0532P6 All d ata sheet.com
Revision, 1 3 of 4 www.appliedpowermicro.com Typical Performance Characteristics (TA=25°C unless otherwise Specified) AR0532P6 Junction Capacitance vs. Reverse Voltage Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current Power Derating Curve
8 X 20μs Pulse Waveform
8 kV Contact per IEC61000−4−2 Note：Data is taken with a 10x attenuator All d ata sheet.com
Revision, 1 4 of 4 www.appliedpowermicro.com Suggested Land Pattern Contact Information Applied Power Microelectronics Co., Ltd. Website: http://www.appliedpowermicro.com Email: sales@appliedpowermicro.com Phone: +86 (0519) 8399 3606 AR0532P6 Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. SYM MILLIMETERS MIN NOM MAX A 0.50 0.55 0.60 A1 - - 0.02 0.05 b 0.15 0.20 0.25 b1 0.35 0.40 0.45 b2 0.20 0.25 0.30 c 0.10 0.15 0.20 D 1.55 1.60 1.65 E 0.95 1.00 1.05 e 0.50BSC L 0.33 0.38 0.43 L1 0.100REF L2 0.05REF L3 0.49REF R 0.08 0.13 0.18 All d ata sheet.com