AR0524P5 APMICRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Features
- Ultra low capacitance: 0.3pF typical (I/O to I/O)
- Ultra low leakage: nA level
- Operating voltage: 5V
- Low clamping voltage
- Up to 4 lines protects
- Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±25kV Contact discharge: ±20kV – IEC61000-4-5 (Lightning) 5A (8/20μs)
- RoHS Compliant AR0524P5 4-Line Ultra Low Capacitance TVS Diode Array Part Number Packaging Reel Size AR0524P5 3000/Tape & Reel 7 inch 0524S = Device Marking Code YYWW = Date Code Dot denotes Pin1 Dimensions and Pin Configuration Mechanical Characteristics
- Package: DFN2510-10 (2.5×1.0×0.5mm)
- Lead Finish: Matte Tin
- Case Material: “Green” Molding Compound.
- Moisture Sensitivity: Level 3 per J-STD-020
- Terminal Connections: See Diagram Below
- Marking Information: See Below
Applications
- HDMI 1.3 & 1.4, USB 2.0 & 3.0 and MDDI ports
- Monitors and flat panel displays
- Set-top box and Digital TV
- Video graphics cards
- HDMI 2.0
- Digital Visual Interface (DVI)
- Notebook Computers
- PCI Express and Serial SATA Ports Marking Information
Ordering Information
I/O_1 I/O_2 I/O_3 I/O_4 GND NC NC NC NC GND All d ata sheet.com
Revision 2 2 of 11 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power (8/20µs) Ppk 80 W Peak Pulse Current (8/20µs) IPP 5 A ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±25 ±20 kV Operating Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 5 V Any I/O pin to ground Breakdown Voltage VBR 6 V IT = 1mA, any I/O pin to ground Reverse Leakage Current IR 0.01 0.5 µA VRWM = 5V, any I/O pin to ground Clamping Voltage VC 9 V IPP = 1A (8 x 20µs pulse), any I/O pin to ground Clamping Voltage VC 16 V IPP = 5A (8 x 20µs pulse), any I/O pin to ground Junction Capacitance CJ 0.3 0.4 pF VR = 0V, f = 1MHz, between I/O pins Junction Capacitance CJ 0.8 pF VR = 0V, f = 1MHz, any I/O pin to ground AR0524P5 All d ata sheet.com
Revision 2 3 of 11 www.appliedpowermicro.com Typical Performance Characteristics (TA=25°C unless otherwise Specified) AR0524P5 Junction Capacitance vs. Reverse Voltage Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current Power Derating Curve
8 X 20μs Pulse Waveform ESD Clamping Voltage
8 kV Contact per IEC61000−4−2 Note：Data is taken with a 10x attenuator All d ata sheet.com
Revision 2 4 of 11 www.appliedpowermicro.com Re-flow Solder Profile All d ata sheet.com
Revision 2 5 of 11 www.appliedpowermicro.com Typical Application The AR0524P5 is designed for easy PCB layout by allowing the traces to run straight through the device. The PCB traces could be used to connect the pin pairs for each line. For example, line 1 enters at pin 1 and exits at pin 10 and the PCB trace connects Pin 1 and Pin 10 together. Ground is connected at Pin 3 and Pin 8. AR0524P5 on USB 3.0 Port Application AR0524P5 Vbus ID GND MicB_SSTX- MicB_SSTX+ MicB_SSRX- MicB_SSRX+ GND_DRAIN Vbus 1245 3 10976 8 Line 1 Line 1 Line 2 Line 2 Line 3 Line 3 Line 4 Line 4 All d ata sheet.com
Revision 2 6 of 11 www.appliedpowermicro.com AR0524P5 on DVI Port Application AR0524P5 C2C1 C4C3 Data 2- Data 2+ Data 4- Data 4+ DDC Clock DDC Data Data 1- Data 1+ Data 3- Data 3+ Data 0- Data 0+ Data 5- Data 5+ Clock+ Clock- Red Green Blue Hysnc DVI Graphic Video Controller All d ata sheet.com
Revision 2 7 of 11 www.appliedpowermicro.com AR0524P5 on HDMI Port Application AR0524P5 TMDS D2+ TMDS D2- TMDS D1+ TMDS D1- TMDS D0+ TMDS D0- TMDS Clock+ TMDS Clock- CEC NC SCL SDA GND 5V Power Hot Plug Detect GND GND GND HDMI Graphic Video Controller GND All d ata sheet.com
Revision 2 8 of 11 www.appliedpowermicro.com AR0524P5 on VGA Port Application SATA Controller AR0524P5 on eSATA Port Application AR0524P5 R G B SCL Vsync Hsync SDA VGA Graphic Video Controller All d ata sheet.com
Revision 2 9 of 11 www.appliedpowermicro.com AR0524P5 on MDDI Port Application AR0524P5 AR0524P5 on 10/100 Base Ethernet Port Application CLIENTHOST MDDI Link MDDI Link Stb+ Stb- Stb+ Stb- Data 0+ Data 0- Data 0+ Data 0- Data 1+ Data 1+ Data 1- Data 1- Host Power Host GND AR0524P5 AR0524P5 AR0521P1 AR0521P1 AR0521P1 AR0521P1 AU0551P1 AU0551P1 10/100 Ethernet PHY RX- RX+ TX- TX+ Transformer All d ata sheet.com
Revision 2 10 of 11 www.appliedpowermicro.com Suggested Land Pattern SYM DIMENSIONS MILLIMETERS INCHES X1 0.200 0.008 X2 0.400 0.016 X3 0.600 0.024 Y 0.600 0.024 Z 1.400 0.056 AR0524P5 TOP VIEW SIDE VIEW BOTTOM VIEW X1 X2 Y Z SYM DIMENSIONS MILLIMETERS INCHES MIN NOM MAX MIN NOM MAX e 0.50BSC 0.020BSC Nd 2.00BSC 0.080BSC L1 0.075REF 0.003REF L2 0.050REF 0.002REF D E A c b RL1 L2e L PIN 1 Nd All d ata sheet.com
Revision 2 11 of 11 www.appliedpowermicro.com Contact Information Applied Power Microelectronics Co., Ltd. Website: http://www.appliedpowermicro.com Email: sales@appliedpowermicro.com Phone: +86 (0519) 8399 3606 DFN2510-10 Tape and Reel Specification Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. All d ata sheet.com