AQZ262 NAIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

(High capacity type) mm inch Max. 32.0 1.260 Max. 43.0 1.693 Max. 9.0 .354

FEATURES

  1. High capacity type power photoMOS relay. Can switch a wide range of currents and voltages. Can control various types of loads, from very small loads to a maxi- mum 6A AC/DC current for sequencers, motors, and lamps. 2. Low ON resistance and high sensi- tivity. Low ON resistance of less than 50 mW on a par with mechanical relays (AQZ262). High sensitivity LED operate current of 3 mA (at 25 C 77 F ). 3. AC/DC dual use Bi-directional control is possible. There is no need to differentiate depending on the load as was necessary with the conven- tional SSR. 4. 4-pin SIL type. 4-pin SIL type of (L) 43.0 mm (W) 9.0 mm (H) 32.0 mm (L) 1.693 inch (W) .354 inch (H) 1.260 inch. 5. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of only 10mA even at the rated load voltage. 6. Controls low-level analog signals The triac, photocoupler, or SSR cannot be used to control signals of less than sever- al hundred mV. The high capacity type power PhotoMOS relay feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. TYPICAL APPLICATIONS
  • Mercury relay replacement
  • Railroad, traffic signals
  • Compact motors, lamps, heaters
  • OA equipment
  • Measurement instruments TYPES AC/DC type * Indicate the peak AC and DC values. Output rating* Part No. Packing quantity Load voltage Load current Inner carton Outer carton 60 V 6.0 A AQZ262 20 pcs 200 pcs400 V 1.0 A AQZ264 RATING 1) Absolute maximum ratings (Ambient temperature: 25 C 77 Item Symbol AQZ262 AQZ264 Remarks Input LED forward current I F 50 mA LED reverse voltage V R 3 V Peak forward current I FP 1 A f = 100Hz, Duty factor = 0.1% Power dissipation P in 75 mA Output Load voltage (Peak AC) V L

60 V 400 V

Continuous load current (Peak AC) I L 6.0 A 1.0 A Peak load current I peak 10.0 A 3.0 A 100 ms (1shot), V L = DC Power dissipation P out 3.0 W Total power dissipation P T 3.0 W I/O isolation voltage Viso 1,500 V AC Temperature limitsOperating T opr –40 C to +85 C –40 F to 185 F Non-condensing at low temperatures Storage Tstg –40 C to +100 C –40 F to 212 F PhotoMOS RELAYS

AQZ262, 264 627 2) Electrical characteristics (Ambient temperature: 25 C 77 Note: Recommendable LED forward current I F = 5 to 10 mA. *Turn on/off time n For Dimensions, see Page 442. n For Schematic and Wiring Diagrams, see Page 448. n For Cautions for Use, see Page 453. Item Symbol AQZ262 AQZ264 Remarks Input LED operate current Typical I Fon 1.0 mA I L = 100 mA V L = 10 VMaximum 3.0 mA LED turn off current Minimum I Foff 0.4 mA I L = 100 mA V L = 10 VTypical 0.9 mA LED dropout voltage Typical V F 1.25 V (1.16 V at I F = 10 mA) I F = 50 mAMaximum 1.5 V Output On resistance Typical R on 0.036 W 1.0 W I F = 10 mA I L = max. Within 1 s on timeMaximum 0.05 W 1.4 W Off state leakage current Maximum I Leak m A I F = 0 V L = max. Transfer characteristics Switching speed Turn on time* Typical T on 5 ms 4 ms I F = 10 mA I L = 100 mA V L = 10 VMaximum 10 ms Turn off time* Typical T off 0.32 ms 0.14 ms I F = 10 mA I L = 100 mA V L = 10 VMaximum 3.0 ms I/O capacitance Typical C iso 2.0 pF f = 1 MHz V B = 0Maximum 4.0 pF Initial I/O isolation resistance Minimum R iso 1,000 M W

500 V DC

Maximum operating frequency Maximum — 0.5 cps I F = 10 mA Duty factor = 50% I L = Max., V L = Max. Ton Input Output 10% 90% Toff REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: –40 C to +85 C –40 F to +185 F 2. Load current vs. ambient temperature char- acteristics in adjacent mounting I L : Load current; I L (max.): Maximum continuous load current 3. On resistance vs. ambient temperature char- acteristics LED current: 10 mA; Continuous load current: 6A (DC)(AQZ262) 1A (DC)(AQZ264) 0 0–40 20 40 60 8085 100–20 AQZ262 AQZ264 Ambient temperature, °C Load current, A 80 85 120 100 0 0–40 20 40 60 100 –20 Ambient temperature, °C IL/IL(max.)·100, % =Adjacent mounting pitch =10mm .394 inch =20mm .787 inch 1.5 0.5 0 0–40 20 40 60 8085–20 AQZ262 AQZ264 Ambient temperature, °C On resistance, W

AQZ262, 264 628 4. Turn on time vs. ambient temperature char- acteristics LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 5. Turn off time vs. ambient temperature char- acteristics LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 6. LED operate vs. ambient temperature char- acteristics Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 0 0–40 20 40 60 80 85–20 AQZ262 AQZ264 Ambient temperature, °C Turn on time, ms 0.8 0.6 0.4 0.2 0 0–40 20 40 60 80 85–20 AQZ262 AQZ264 Ambient temperature, °C Turn off time, ms 0 0–40 20 40 60 80 85–20 AQZ262 AQZ264 Ambient temperature, °C LED operate current, mA 7. LED turn off current vs. ambient temperature characteristics Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 8. LED dropout voltage vs. ambient tempera- ture characteristics Sample: all types; LED current: 5 to 50 mA 9. Voltage vs. current characteristics of output at MOS portion Ambient temperature: 25 C 77 F 0 0–40 20 40 60 8085–20 AQZ264 AQZ262 Ambient temperature, °C LED turn off current, mA 1.5 1.4 1.3 1.2 1.1 1.0 0 0–40 20 40 60 100 80 85–20 50mA 30mA 20mA 10mA 5mA LED dropout voltage, V Ambient temperature, °C –2.0 –4.0 –6.0 –8.0 0.5 2.0 1.0 2.01.5 AQZ262 AQZ264 8.0 6.0 4.0 Voltage, V Current, A 10. Off state leakage current Ambient temperature: 25 C 77 F 11. LED forward current vs. turn on time char- acteristics Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25 C 77 F 12. LED forward current vs. turn off time char- acteristics Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25 C 77 F 0 50 100 –12 AQZ264 AQZ262 Load voltage, V Off state leakage current, A 0 10 20 30 40 500 AQZ264 AQZ262 LED forward current, mA Turn on time, ms 0.5 0.6 0.4 0.3 0.2 0.1 0 10 20 30 40 500 AQZ262 AQZ264 LED forward current, mA Turn off time, ms 13. Maximum operating frequency vs. load volt- age/current characteristics LED current: 10 mA; Ambient temperature: 25 C 77 F 14. Applied voltage vs. output capacitance characteristics Frequency: 10 KHz; Ambient temperature: 25 °C 77°F 15.-(1) On resistance distribution Sample: AQZ262 LED current: 10 mA; Continuous load current: 6 A (DC): Quantity. n=100; Ambient temperature: 25°C 77°F 0 0 50 100 150 200 250 300 350 400 450 Load voltage, V ·load current, A Maximum operating frequency, time/s duty = 50% 5000 4000 3000 2000 1000 00 20 40 60 80 100 AQZ262 AQZ264 Applied voltage, V Output capacitance, pF On resistance, mW Quantity

AQZ262, 264 629 15.-(2) On resistance distribution Sample: AQZ264 LED current: 10 mA; Continuous load current: 1 A (DC); Quantity, n=100; Ambient temperature: 25°C 77°F 16.-(1) Turn on time distribution Sample: AQZ262 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F 16.-(2) Turn on time distribution Sample: AQZ264 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F 0 0.9 1 1.1 1.31.2 On resistance, W Quantity 05 6 437 Turn on time, ms Quantity 02 3 4 65 Quantity Turn on time, ms 17.-(1) Turn off time distribution Sample: AQZ262 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F 17.-(2) Turn off time distribution Sample: AQZ264 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F 18.-(1) LED operate current distribution Sample: AQZ262 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F Turn off time, ms Quantity Turn off time, ms Quantity Quantity LED operate current, mA 18.-(2) LED operate current distribution Sample: AQZ264 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F 19.-(1) LED turn off current distribution Sample: AQZ262 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F 19.-(2) LED turn off current distribution Sample: AQZ264 Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Quantity, n=100; Ambient temperature: 25°C 77°F Quantity LED operate current, mA Quantity LED turn off current, mA Quantity LED turn off current, mA 20.-(1) LED dropout voltage distribution Sample: AQZ262 LED current: 50 mA; Quantity, n=100; Ambient temperature: 25°C 77°F 20.-(2) LED dropout voltage distribution Sample: AQZ264 LED current: 50 mA; Quantity, n=100; Ambient temperature: 25°C 77°F 21.-(1) Bias test at high temperature and high humidity (change of turn on time) Quantity, n=10; Ambient temperature: 85°C 185°F Humidity: 85%, VL=Max. · 0.8 100 Quantity LED dropout voltage, V 100 Quantity LED dropout voltage, V 11 0 AQZ264 Test time, h AQZ262 Turn on time, ms

AQZ262, 264 630 21.-(2) Bias test at high temperature and high humidity (change of on resistance) Quantity, n=10; Ambient temperature: 85 °C 185°F Humidity: 85%, VL=Max. · 0.8 22.-(1) Low temperature storage test (change of turn on time) Quantity, n=10; Ambient temperature: –40°C –40°F 22.-(2) Low temperature storage test (change of on resistance) Quantity, n=10; Ambient temperature: –40°C –40°F 1.6 1.2 0.8 0.4 1 10 10 Test time, h AQZ262 AQZ264 On resistance, W 1 10 10 AQZ264 AQZ262 Test time, h Turn on time, ms 1.6 1.2 0.8 0.4 1 10 10 Test time, h On resistance, W AQZ264 AQZ262 23.-(1) High temperature storage test (change of turn on time) Quantity, n=10; Ambient temperature: 100°C 212°F 23.-(2) High temperature storage test (change of on resistance) Quantity, n=10; Ambient temperature: 100°C 212°F 1 10 AQZ264 AQZ262 Test time, h Turn on time, ms 1.6 1.2 0.8 0.4 1 10 AQZ264 AQZ262 Test time, h On resistance, W 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog