AQY221N2S NAIS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
RF (Radio Frequency) C · R 10 Type (by) PhotoMOS RELAYS Measuring and testing equipment 1. Testing equipment for semiconductor performance IC tester, Liquid crystal driver tester, semiconductor performance tester 2. Board tester Bear board tester, In-circuit tester, function tester 3. Medical equipment Ultrasonic wave diagnostic machine 4. Multi-point recorder Warping, thermo couple TYPICAL APPLICATIONSFEATURES 1. In addition to lower output capaci- tance between terminals than ever before, the PhotoMOS relay achieves low ON-resistance. Output capacitance(C): 1.0pF (typ.) ON resistance(R): 9.5 W (typ.) 2. High speed switching Turn on time: 30 m s Turn off time: 30 m s 3. SO package 4-pin type in super min- iature design 4. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes, where as this PhotoMOS relay has only 10pA (typical) even with the rated load voltage 5. Controls low-level analog signals 6. Low thermal electromotive force (Approx. 1 m 4.4–0.2 .173–.008 2.1–0.2 .083–.008 4.3–0.2 .169–.008 mm inch * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the initial letters of the product number “AQY and S”, the package type indicator “X” and “Z” are omitted from the seal. Circuit arrangement Type Output rating* Tape and reel packing style Packing quantity in tape and reelLoad voltage Load current Picked from the 1/2-pin side Picked from the 3/4-pin side 1 Form A AC/DC 40 V 120 mA AQY221N2SX AQY221N2SZ 1,000 pcs. TYPES Item Symbol AQY221N2S Remarks Input LED forward current I F 50mA LED reverse voltage V R Peak forward current I FP 1A f=100 Hz, Duty factor=0.1% Power dissipation P in 75mW Output Load voltage (peak AC) V L 40V Continuous load current I L 0.12A Peak AC,DC Peak load current I peak 0.30A 100 ms (1 shot), VL= DC Power dissipation P out 300mW Total power dissipation P T 350mW I/O isolation voltage V iso 1,500V AC Temperature limits Operating T opr –40°C to +85°C –40°F to +185°F Non-condensing at low temperatures Storage T stg –40°C to +100°C –40°F to +212°F RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) CSA pending UL pending
Item Symbol AQY221N2S Condition Input LED operate current Minimum Typical Maximum I Fon 0.9 mA 3.0mA I L = 80 mA LED turn off current Minimum Typical Maximum I Foff 0.2 mA 0.85mA I L = 80 mA LED dropout voltage Minimum Typical Maximum V F 1.14V (1.25 V at I F = 50mA) 1.5 V I F = 5mA Output On resistance Minimum Typical Maximum R on 9.5 W 12.5 W I F = 5mA I L = 80 mA Within 1 s on time Output capacitance Minimum Typical Maximum C out 1.0 pF 1.5 pF I F = 0 V B = 0 V f = 1 MHz Off state leakage current Minimum Typical Maximum I Leak 0.01 nA 10 nA I F = 0 V L = Max. Transfer characteristics Switching speed Turn on time* Minimum Typical Maximum T on 0.03 ms 0.5 ms I F = 5mA V L = 10V R L = 125 W Turn off time* Minimum Typical Maximum T off 0.03ms 0.2 ms I F = 5mA V L = 10V R L = 125 W I/O capacitance Minimum Typical Maximum C iso 0.8 pF 1.5pF f = 1MHz V B = 0 Initial I/O isolation resistance Minimum Typical Maximum R iso 1,000M W 500V DC 2. Electrical characteristics (Ambient temperature: 25°C 77°F) *Turn on/Turn off time Toff Input Output Ton 90% 10% REFERENCE DATA 140 0 2 04 06 0 8085 100-40 -20 100 120Load current, mA Ambient temperature, °C 02 0 4 0 6 0 8 0 8 5-40 -20 On resistance, W Ambient temperature, °C 200 10 20 30 40 500 120 160Load current, mA Load voltage, V 1. Load current vs. ambient temperature char- acteristics Allowable ambient temperature: –40°C to +85 C –40°F to +185°F 2. Load current vs. Load voltage characteristics Ambient temperature: 25°C 77°F 3. On resistance vs. ambient temperature char- acteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: Max. (DC); Load current: 80mA (DC) n For Dimensions, see Page 441. n For Schematic and Wiring Diagrams, see Page 444. n For Cautions for Use, see Page 449.
Turn on time vs. ambient temperature characteris- tics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) 5. Turn off time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) 6. LED operate current vs. ambient tempera- ture characteristics Load voltage: Max. (DC); Continuous load current: 80mA (DC) 0.04 0.06 -40 -20 0.1 02 0 4 0 6 0 8 0 0.02 0.08 Turn on time, ms Ambient temperature, °C 0.04 0.06 -40 -20 0.1 02 0 4 0 6 0 8 0 8 5 0.02 0.08Turn off time, ms Ambient temperature, °C 0.5 -40 -20 02 0 4 0 6 0 8085 1.5 LED operate current, mA Ambient temperature, °C 7. LED turn off current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: 80mA (DC) 8. LED dropout voltage vs. ambient tempera- ture characteristics LED current: 5 to 50 mA 9. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 0.5 -40 -20 02 0 4 0 6 0 8085 1.5 LED turn off current, mA Ambient temperature, °C 1.0 1.1 1.2 1.3 -40 -20 02 0 4 0 6 0 8 0 1.4 50mA 30mA 20mA 10mA 5mA 1.5 85 100 LED dropout voltage, V Ambient temperature, °C -0.5 120 100 -20 -40 -60 -80 -100 -120 voltage current 10. Off state leakage current Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 11. LED forward current vs. turn on time characteristics Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25 C 77°F 12. LED forward current vs. turn off time characteristics Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25 C 77°F 40302010 -12 05 0 Off state leakage current, A Load voltage, V 0.04 0.12 0.08 1002 0 3 0 4 0 0.16 50 60 Turn on time, ms LED forward current, mA 0.02 0.08 0.04 0.06 1002 0 3 0 4 0 0.1 50 60 Turn off time, ms LED forward current, mA 13. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25 C 77°F 14. Isolation characteristics (50 W impedance) Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 15. Insertion loss characteristics (50 W imped- ance) Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 0.5 2.5 2010 30 40 50 1.5 Output capacitance, pF Applied boltage, V 0 10 10 10 68 10710 100 Isolation, dB Frequency, Hz 0 10 10 106710 1.5 0.5 Insertion loss, dB Frequency, Hz
- On resistance distribution Measured portion: between terminals 3 and 4 Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25 C 77°F 17. Turn on time distribution Load voltage: 10V(DC); Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25 C 77°F 18. Turn off time distribution Load voltage: 10V(DC); Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25 C 77°F 8.6 9 9.4 9.8 10.2 Quantity, n On resistance, W Quantity, n Turn on time, ms Quantity, n Turn off time, ms 19. LED operate current distribution Load voltage: 10V(DC); Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25 C 77°F Quantity, n LED operate current, mA 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog