AQW614 NAIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

N.C. N.O. GU (General Use) Type [2-Channel (Form A Form B) Type] mm inch 6.4 .2529.78 .385 3.6–0.2 .142–.008 6.4 .2529.78 .385 3.9–0.2 .154–.008

FEATURES

  1. Approx. 1/2 the space compared with the mounting of a set of 1 Form A and 1 Form B photoMOS relays 2. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use 3. Low thermal electromotive force (Approx. 1 m 4. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 5. Controls load currents up to 0.13 A with an input current of 5 mA with load voltage of 400 V 6. High speed switching: operate time of 300 m s typical. 7. Eliminates the need for a power sup- ply to drive the power MOSFET 8. Extremely low closed-circuit offset voltages to enable control of small an- alog signals without distortion (Typical 100 pA at 400 V) 9. Stable on resistance TYPICAL APPLICATIONS
  • High-speed inspection machines
  • Telephone equipment
  • Computer TYPES *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. Type Output rating* Part No. Packing quantity Load voltage Load current Through hole ter- minal Surface-mount terminal Tube packing style Tape and reel packing style Tube Tape and reelPicked from the 1/2/3-pin side Picked from the 4/5/6-pin side AC/DC type 400 V 100 mA AQW614 AQW614A AQW614AX AQW614AZ 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. RATINGS 1. Absolute maximum ratings (Ambient temperature: 25 C 77 Item Symbol AQW614(A) Remarks Input LED forward current I F 50 mA LED reverse voltage V R 3 V Peak forward current I FP 1 A f = 100 Hz, Duty factor = 0.1% Power dissipation P in 75 mW Output Load voltage V L 400 V Continuous load current I L 0.1 A (0.13 A) Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel Peak load current I peak

0.3 A 100 ms (1 shot), V

L = DC Power dissipation P out 800 mW Total power dissipation P T 850 mW I/O isolation voltage V iso 1,500 V AC Between input and output/between contact sets Temperature limitsOperating T opr –40 C to +85 C –40 F to +185 F Non-condensing at low temperatures Storage T stg –40 C to +100 C –40 F to +212 F PhotoMOS RELAYS

  1. Electrical characteristics (Ambient temperature: 25 C 77 Note: Recommendable LED forward current I F = 5 mA. For type of connection, see page 32. *Operate/Reverse time Item Symbol AQW614 Condition Input LED operate (OFF) current Typical I Fon (N.O.) I Foff (N.C.) L = 100 mAMaximum 3 mA LED reverse (ON) current Minimum I Foff (N.O.) I Fon (N.C.) 0.4 mA I L LED dropout voltage Typical V F 1.14 V (1.25 V at I F = 50 mA) I F = 5 mAMaximum 1.5 V Output On resistance Typical R on W I F = 5 mA (N.O.) I F = 0 mA (N.C.) I L = 100 mA within 1 s on time Maximum 50 W Off state leakage current Maximum I Leak m A I F = 0 mA (N.O.) I F = 5 mA (N.C.) V L = 400 V Transfer characteristics Operate (OFF) time* Typical T on (N.O.) T off (N.C.) F = 0 mA Ý 5 mA I L = 100 mAMaximum 1 ms Reverse (ON) time* Typical T off (N.O.) T on (N.C.) F = 5 mA Ý 0 mA I L = 100 mAMaximum 1 ms I/O capacitance Typical C iso 0.8 pF f = 1 MHz V B = 0Maximum 1.5 pF Initial I/O isolation resistance Minimum R iso 1,000 M W

500 V DC

1) N.O. 2) N.C. Ton Input Output 10% 90% Toff Toff Input Output 10% 90% Ton REFERENCE DATA 1. Load current vs. ambient temperature char- acteristics Allowable ambient temperature: –40 C to +85 C –40 F to +185 F 2. On resistance vs. ambient temperature char- acteristics Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 3. Operate (OFF) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 0–20 20 40 100 120 100 0–40 60 8085 Load current, mA Ambient temperature, °C 0–20 20 40 60 8085 0 –40 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) On resistance, Ω Ambient temperature, °C 0–20 20 40 60 8085 1.2 1.0 0.8 0.6 0.4 0.2 0 –40 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Operate (OFF) time, ms Ambient temperature, °C

  1. Reverse (ON) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 5. LED operate (OFF) current vs. ambient tem- perature characteristics Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 6. LED reverse (ON) current vs. ambient tem- perature characteristics Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 0–20 20 40 60 8085 1.2 1.0 0.8 0.6 0.4 0.2 0 –40 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Reverse (ON) time, ms Ambient temperature, °C 0–20 20 40 60 8085 0 –40 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) LED operate (OFF) current, mA Ambient temperature, °C 0–20 20 40 60 8085 0 –40 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) LED reverse (NO) current, mA Ambient temperature, °C 7. LED dropout voltage vs. ambient tempera- ture characteristics LED current: 5 to 50 mA 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25 C 77 F 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25 C 77 F 5mA 0–20 20 40 60 8085 1.5 1.4 1.3 1.2 1.1 1.0 –40 50mA 30mA 20mA 10mA LED dropout voltage, V Ambient temperature, °C 1 2 3 4 5 100 –100 –80 –60 –40 –20 Between terminal 7 and 8 (N.C.) Between terminal 5 and 6 (N.O.) Current, mA Voltage, V 0 40 60 8020 100 10–3 10–6 10–9 10–12 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Off state leakage current, A Load voltage, V 10. LED forward current vs. operate (OFF) time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25 C 77 F 11. LED forward current vs. reverse (ON) time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25 C 77 F 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25 C 77 F 10 20 30 40 50 60 3.0 2.5 2.0 1.5 1.0 0.5 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Operate (OFF) time, ms LED forward current, mA 10 20 30 40 50 6010 20 30 40 50 60 0.6 0.5 0.4 0.3 0.2 0.1 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Reverse (ON) time, ms LED forward current, mA 10 20 30 40 50 60 120 100 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) Output capacitance, pF Applied voltage, V 5/7/2001 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.