AQM1264D-MLG-YBS ZETTLER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
DISPLAYTRONIC CO., LTD. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 CUSTOMER APPROVAL 1.POLARIZER OPTIONS: □R=REFLECTIVE □F=TRANSFLECTIVE □N=TRANSMISSIVE NEGATIVE ■M=TRANSMISSIVE POSITIVE 2.BACKLIGHT OPTIONS:□N=NONE □E=EL ■L=LED □C=CCFL 3. BACKLIGHT COLOR: □A= AMBER □B= BLUE ■G= GREEN □W=WHITE □R= RED □RGB= RED+GREEN+BLUE 4.FLUID OPTIONS: □T=TN □F=FSTN ■Y=STN-YELLOW GREEN □G=STN-GRAY □B=STN-BLUE 5. VIEWING DIRECTION: ■B=BOTTOM VIEW(6 O’CLOCK) □T=TOP VIEW(12 O’CLOCK) 6.TEMPERATURE RANGE: ■ S=STANDARD TEMPERATURE RANGE □H=DUAL POWER,WIDE TEMPERATURE RANGE □W=SINGLE POWER,WIDE TEMPERATURE RANGE2 7.OTHERS REQUIREMENT: ※ CUSTOMER PART NO. : AQM1264D-MLG-YBS APPROVAL COMPANY CHOP CUSTOMER COMMENTS DISPLAYTRONIC ENGINEERING APPROVAL DESIGN BY CHECKED BY APPROVED BY
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 1 REVISION RECORD REVISION REVISION DATE CONTENTS VER1.0 21/11-2007 FIRST ISSUED
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 2 ※ CONTENTS
1.0 MECHANICAL DRAWING
2.0 MECHANICAL SPECIFICATION
3.0 ABSOLUTE MAXIMUM RATINGS
4.0 ELECTRICAL CHARACTERISTICS
5.0 LCD OPTICAL CHARACTERISTICS
6.0 BLOCK DIAGRAM
7.0 PIN ASSIGNMENT
8.0 TIMING CHARACTERISTICS
9.0 COMMAND SETTING DESCRIPTION
10.0 RELIABILITY SPECIFICATION
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 3 LCD规格详述 XIAMEN ZETTLER ELECTRONICS CO., LTD. 厦门赛特勒电子有限公司 单位 2007/09/20更改FPC(D7) 2007/09/19更改背光颜色A3 符号引脚 制图: 批准： 审核： 比例: 品号： X.XX = ±0.10 ANG = - 毫米(mm) X.X = ±0.2 误差 1/1页码 版本 次数 变更号 修改内容 日期 型号： 题目：
9 LED+
VDD(3.0V) RST RS CS SCK SDA 2007/09/10第一次发行
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 4 NOTE1: ULESS OTHERWISE SPECIFIED STANDARD TOLERANCE ±0.2MM
- Number of dots 128x64 2. Module dimension 93.0mm(L) x 57.0mm(W) x 10.5mm(T) 3. Bezel dimension 70.6mm(L) x 51.5mm(W) x 10.5mm(T) 4. Active display area (A/A) 60.775mm(L)x32.935mm(W) 5. View area (V/A) 65.5mm(L)x38.0mm(W) 6. Dot Size 0.45mm(W) x 0.49mm(H) 7. Dot Pitch 0.475mm(W) x 0.515mm(H) 8. Driver method 1/65 dut y,1/9 bias, Vop=9.8V 9. Display mode Positive STN Transmissive Yellow-Green 10. LCD type STN/ YELLOW-GREEN 11. Driver IC ST7565P COG 12. Backlight Options LED-SIDE Green
DC Supply Voltage(VDD) 0.3 5.0 V DC Supply Voltage(Vout) 0.3 18.0 V DC Supply Voltage(V0) 0.3 18.0 V Input Voltage 0.3 VDD+0.3 V Operating Temperature -10 60 ºC Storage Temperature -20 70 ºC Item Symbol Condition Min Typ Max Unit Power Supply V DD-VSS - 1.8 3.0 3.3 V Input voltage (high) Vih H level 0.8 VDD - V DD V Input voltage (low) Vil L level Vss - 0.2 V DD V Output voltage (high) Voh I OH=-0.5mA 0.8 VDD V DD V Output voltage (low) Vol I OL=0.5mA Vss 0.2 V DD V Power Supply Current Idd Vdd=3.0V - - 0.8mA mA LED Power Supply Voltage A-K - 3.0 3.15 3.3 V LED Power Supply Current I BL - - 15 - mA Luminance evenness - Same part(Min/Max) 70% - - -
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 5
5.0 BLOCK DIAGRAM
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 6
6.0 PIN ASSIGNMENT
Pin No I/O Name Description
1 I SDA Serial data input
2 I SCK Serial clock input
3 I /CS Chip select signal. Active:L
4 I RS Display data or control data select signal
5 I RST Reset signal
6 I VDD Power supply(3.0V)
7 I GND Power supply(0V)
8 I LED-(K) Power supply for backlight(+)
9 I LED+(A) Power supply for backlight(-)
7.0 LCD OPTICAL CHARACTERISTICS
Item Symbol Test condition Min. Typ. Max. Unit Note Ф1-Ф2 - 65 - Ф1 35 45 - Ф2 -25 -20 - Degree Note2 Viewing angle θ T=25 ,CR=2℃ - ±35 - Contrast ratio K1 Ф=0°,θ=0° 6 - - - Note3 Rise time tr 1 - 150 250 ms Note4 Fall time td 1 Ф=0°,θ=0° Transflective mode - 150 250 ms Note4 Note 2: Definition of angle θ and φ. φ: Angle measured from normal to direction of observation. θ: Azimuth angle measured counter-clockwise from X-axis. Note 3 : Definition of Contrast ratio The contrast ratio is defined to be the ratio of transmission or reflection of a symbol at its "on" and "off" state. Transmission/Reflectance at "OFF" state Contrast ratio(K) = Transmission/Reflectance at "ON" state Note 4 : Definition of response time At specific operating voltage and temperature, the times measured by observing contrast or transmission ratio.
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 7 Von Voff TIME (BRIGHT) 10% 100% 90%(DARK) CONTRAST(%) t0 tr td Delay time to : Measured between zero and 10% with Von. Rise time tr : Measured between 10% and 90% of LCD segment maximum response with Von Decay time td : With voltage switches to zero and the instant LCD segment reaches 10% of its maximum response Ton : Time measured between the instant operating voltage is applied to display and the distant the display reaches 90% of its maximum response. Toff : Time measured between the instant operating voltage switches to zero and the instant the display reaches 10% of its maximum response. LIQUID CRYSTAL PANEL LIFE TIME 50000 hours minimum at 25 ±10 and 65% RH maximum.℃℃ Note: Definition of life time : the time up to occurrence of any of the following: Contrast reduces to 30% of the initial value. Current consumption becomes three times the initial value. Orientation deteriorates significantly.
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 8
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 9
AQM1264D-MLG-YBS GRAPHIC MODULE VER1.0 DISPLAYTRONIC CO., LTD. 10 High temperature operation 60℃ for 96 hours Low temperature operation -10℃ for 96 hours High humidity, High temperature operation 40℃,90%RH for 96 hours High temperature storage 70℃ for 96 hours Low temperature storage -20℃ for 96 hours Temperature cycling(storage) 70℃ (30 min) 25℃ ( 5 min) -20℃ ( 30 min) CYCLES: 5 ESD (Electrostatic Discharge) +/-8KV air discharge to LCD module. +/-2KV discharge is applied to VDD&VSS of LCD module. Test for functionality and No missing line after discharge.