AQHV36-01ETG-C

AQHVXX-01ETG-C LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 AQHVxx-01ETG-C General Purpose ESD Protection

Description

Applications

The AQHVxx-01ETG-C series is designed to provide an option for very fast acting, high performance over-voltage protection components. This series is ideally suited for power interfaces, passenger charging interfaces, and well as LED lighting modules, and low speed I/Os. It will protect sensitive equipment from damage due to electrostatic discharge (ESD) and other overvoltage transients. The AQHVxx-01ETG-C series can safely absorb repetitive ESD strikes above the maximum level of the IEC 61000-4-2 international standard (Level 4, ±8kV contact discharge) without performance degradation and safely conduct up to 8A (AQHV12-C) of induced surge current (IEC 61000-4-5 2nd edition, tP=8/20μs) with very low clamping voltages. Features & Benefits Pinout Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 1 2 RoHS Pb ■ ESD, IEC 61000-4-2, ±30kV contact, ±30kV air ■ EFT , IEC 61000-4-4, 40A 5/50ns) ■ Lightning, IEC 61000-4-5 2nd Edition, 8A (8/20us) for AQHV12-C ■ Low clamping voltage ■ PPAP capable ■ Low leakage current ■ Small SOD882 packaging helps save board space ■ AEC-Q101 qualified ■ Moisture Sensitivity Level(MSL -1) ■ Halogen free, lead free and RoHS compliant ■ LED Lighting Modules ■ Portable Instrumentation ■ General Purpose I/O ■ RS232 / RS485 ■ CAN and LIN Bus ■ Automotive application

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 AQHVxx-01ETG-C General Purpose ESD Protection Caution: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units Ppk Peak Pulse Power (tp=8/20μs) 200 W TOP Operating Temperature -40 to 150 °C TSTOR Storage Temperature -55 to 150 °C Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR=1μA 12.0 V Breakdown Voltage VBR IR=1mA 13.3 V Reverse Leakage Current ILEAK VR=12V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 19.0 V IPP=8A, tP=8/20μs, Fwd 25.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to GND 0.48 Ω Peak Pulse Current Ipp tp=8/20µs 8.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-I/O Reverse Bias=0V , f=1MHz 30 pF Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR=1μA 15.0 V Breakdown Voltage VBR IR=1mA 16.7 V Reverse Leakage Current ILEAK VR=15V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 22.0 V IPP=5A, tp=8/20µs, Fwd 30.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to GND 0.43 Ω Peak Pulse Current Ipp tp=8/20µs 5.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-I/O Reverse Bias=0V , f=1MHz 24 pF

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 AQHVxx-01ETG-C General Purpose ESD Protection Power Derating Curve Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR=1μA 36.0 V Breakdown Voltage VBR IR=1mA 40.0 V Reverse Leakage Current ILEAK VR=36V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 52.0 V IPP=2A, tp=8/20µs, Fwd 65.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to GND 1 .33 Ω Peak Pulse Current Ipp tp=8/20µs 2.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±15 kV IEC 61000-4-2 (Air Discharge) ±20 kV Diode Capacitance1 CI/O-I/O Reverse Bias=0V , f=1MHz 13 pF Note: 1 Parameter is guaranteed by design and/or component characterization.

2 Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns

Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR=1μA 24.0 V Breakdown Voltage VBR IR=1mA 26.7 V Reverse Leakage Current ILEAK VR=24V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 36.0 V IPP=3A, tp=8/20µs, Fwd 50.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to GND 0.65 Ω Peak Pulse Current Ipp tp=8/20µs 3.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±24 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-I/O Reverse Bias=0V , f=1MHz 17 pF 100 110 0 150125100755025 Ambient Temperature - TA (oC) % of Rated Power IPP

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 AQHVxx-01ETG-C General Purpose ESD Protection 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP 05 10 15 20 25 30 TLP Voltage (V) TLP Current (A) AQHV12-C T ransmission Line Pulsing(TLP) Plot 05 10 15 20 25 30 35 TLP Voltage (V) TLP Current (A) AQHV15-C T ransmission Line Pulsing(TLP) Plot 05 10 15 20 25 30 35 40 45 50 55 TLP Voltage (V) TLP Current (A) AQHV24-C T ransmission Line Pulsing(TLP) Plot AQHV36-C T ransmission Line Pulsing(TLP) Plot 01 02 03 04 05 06 07 08 09 0 100 TLP Voltage (V) TLP Current (A)

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 AQHVxx-01ETG-C General Purpose ESD Protection Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters

Ordering Information

Part Number Package Min. Order Qty. AQHV12-01ETG-C SOD882 10000 AQHV15-01ETG-C AQHV24-01ETG-C AQHV36-01ETG-C Part Numbering System Part Marking System AQHV ** 01 T G Voltage Number of Channels Package T= Tape & Reel G= Green TVS Diode Arrays (SPA® Automotive Grade Diodes) E: SOD882 E –C Bidirectional 2: AQHV12-C 5: AQHV15-C 4: AQHV24-C 6: AQHV36-C Product Characteristics Lead Plating Pre-Plated Frame Lead Material Copper Alloy Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 AQHVxx-01ETG-C General Purpose ESD Protection Embossed Carrier T ape & Reel Specification Feeding Direction Top mark and pin 1 direction in Tape and Reel BX Recommended Soldering Pad Layout 0.325 0.325 0.650 0.975 0.650 Symbol JEDEC MO-236 Millimeters Inches Min Ty p Max Min Ty p Max D 0.45 0.018 Symbol Millimeters A 0.70+/-0.045 B 1 .10+/-0.045 C 0.65+/-0.045 d 1 .55+/-0.10 E 1 .75+/-0.05 F 3.50+/-0.05 P 2.00+/-0.10 P0 4.00+/-0.10 P1 2.00+/-0.10 ,Ref. ,Ref. ,Ref. 8mm TAPE AND REEL Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.