AQH1223 NAIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

ASCT1B272E ’03.7 http://www.naisrelay.com/ New AQ-H RELAYS Pending VDE (AQH1213, AQH1223, AQH2213, AQH2223) (AQH0213, AQH0223, AQH3213, AQH3223) VDE AQ-H SOLID STATE RELAY ZC Zero-cross circuit

FEATURES

  1. Compact DIP type SSR that’s ideal for AC load control ON-state RMS currents. 3. The 1.2 A type saves space with a DIP 8-pin package. (Competitor only provides a 16-pin type.) 4. Only ours handles both 100 and 200 V AC loads This relay handles both voltages in a single product. It is not necessary for users that use both types to manage separate part numbers. 5. High dielectric strength: 5,000 V AC (between input and output) 6. Two types available: Zero-cross type and Non-zero-cross type TYPICAL APPLICATIONS 1. Home appliances (air conditioners, microwave ovens, washing machines, personal hygiene systems, refrigerators, fan heaters, inductive heating cooker, and water heaters, etc.) 2. Industrial equipment market. 6.4 .252 DIP8 DIP16 (mm inch) 19.82 .780 9.78 .385 TYPES *Indicate the repetitive peak OFF-state voltage and ON-state RMS current: peak AC. Note: For space reasons, the SMD terminal shape indicator “A” and the package type indicator “X” and “Z” are omitted from the seal. Type Output rating* Type Part No. Packing quantityThrough hole terminal Surface-mount terminal Repetitive peak OFF- state voltage ON-state RMS current Tube packing style Tape and reel packing style Tube Tape and reelPicked from the 1/2/3/4-pin side Picked from the 5/6/8-pin side AC type 600 V 0.3 A Zero-cross AQH0213 AQH0213A AQH0213AX AQH0213AZ 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs.

0.6 A AQH1213 AQH1213A AQH1213AX AQH1213AZ

0.9 A AQH2213 AQH2213A AQH2213AX AQH2213AZ

1.2 A AQH3213 AQH3213A AQH3213AX AQH3213AZ

0.3 A Non zero-cross AQH0223 AQH0223A AQH0223AX AQH0223AZ

0.6 A AQH1223 AQH1223A AQH1223AX AQH1223AZ

0.9 A AQH2223 AQH2223A AQH2223AX AQH2223AZ

1.2 A AQH3223 AQH3223A AQH3223AX AQH3223AZ

  1. Absolute maximum ratings (Ambient temperature: 25 C 77 Item Symbol AQH0213 AQH0223 AQH1213 AQH1223 AQH2213 AQH2223 AQH3213 AQH3223 Remarks Input LED forward current I F 50 mA LED reverse voltage V R 6 V Peak forward current I FP

1 A f = 100 Hz,

Duty Ratio = 0.1% Output Repetitive peak OFF-state votage V DRM 600 V ON-state RMS current IT (RMS) 0.3 A 0.6 A 0.9 A 1.2 A Non-repetitive surge current I TSM

3 A 6 A 9 A 12 A 60Hz, 1 cycle

5,000 V AC Temperature limits Operating T opr –30 C to +85 C –22 F to +185 F Non-condensing at low temperatures Storage T stg –40 C to +125 C –40 F to +257 F

  1. Electrical characteristics (Ambient temperature: 25 C 77 Notes: *Recommended LED current I FT : 20 mA Applicable part No.: AQH0213, AQH1213, AQH2213 and AQH3213. *Turn on time Item Symbol AQH0213 AQH1213 AQH2213 AQH3213 AQH0223 AQH1223 AQH2223 AQH3223 Condition Input LED dropout voltageTypical V F

1.18 V I

F = 10 mAMaximum 1.3 V LED reverse currentTypical I R — V R = 6 VMaximum 10 m A Output Peak OFF-state current Typical I DRM — I F = 0 mA V DRM = 600 VMaximum 100 m A Peak ON-state voltage Typical V TM — I F = 10 mA I TM = Max.Maximum 2.5 V Holding current Typical I H Maximum 25 mA Critical rate of rise of OFF-state voltage Minimum dv/dt 200 V/ m s V DRM = 600 V M Transfer charac- teristics Trigger LED current* Maximum I FT 10 mA V D = 6 V R L = 100 W Zero-cross voltage** Maximum V ZC

50 V — I

F = 10 mA Turn on time*** Maximum T ON m s I F = 20 mA V D = 6 V R L = 100 W I/O isolation resistance Minimum R iso 50 G W

500 V DC

90% DIMENSIONS mm inch Through hole terminal type Terminal thickness: 0.25 .010 General tolerance: 0.1 .004 7.62 .300 6.4 .252 3.9–0.2 .154–.008 3.0 .118 2.54 .100 1.2 .047 1.2 .047 2.54 .100 2.54 .100 3.4 .134 9.78 .385 MAX. 10° MAX. 10° 0.5 .020 0.5 .0200.5 .020 0.5 .020 1.2 .0471.2 .047 Surface mount terminal type Terminal thickness: 0.25 .010 General tolerance: 0.1 .004 MAX.10 ° 7.62 .300 6.4 .252 3.4 .134 0.2+0.2 .008+.008 2.54 .100 1.2 .047 1.2 .047 2.54 .100 2.54 .100 3.4 .134 9.78 .385 0.5 .020 0.5 .020 0.5 .020 0.5 .020 1.2 .047 1.2 .047 PC board pattern (BOTTOM VIEW) Tolerance: 0.1 .004 Recommended mounting pad (TOP VIEW) Tolerance: 0.1 .004 7.62 .300 7.62 .3006.4 .252 2.54 .100 2.54 .100 8-0.8 dia. hole 8-.031 dia. hole 8.3 .3271.9 .075 1.5 .059 2.54 .100 2.54 .100 2.54 .100

  1. ON-state RMS current vs. Ambient temperature characteristics Allowable ambient temperature: –30 C to +85 C –22 F to +185 F 2. On voltage vs. Ambient temperature characteristics LED current: 10 mA; ON current: Max. Measured portion: between terminals 6 and 8 3. Trigger LED current vs. Ambient temperature characteristics Load voltage: 6 V DC; Load resistance: 100 W 0.3 0.6 0.9 1.2 1.5 –20 02 0 4 0 6 0 80 10085–30 Ambient temperature, °C ON-state RMS current, mA AQH2213, AQH2223 AQH1213, AQH1223 AQH0213, AQH0223 AQH3213, AQH3223 0.6 0.8 1.2 1.4 1.6 –40 –20 0 2 04 06 0 80–30 85 Ambient temperature, °C On voltage, V AQH1213, AQH1223 AQH2213, AQH2223 AQH0213, AQH0223 AQH3213, AQH3223 Ambient temperature, °C 02 0 4 0 6 0 80 85–30–40 –20 Trigger LED current, mA 4. LED dropout voltage vs. Ambient temperature characteristics LED current: 10 to 50 mA 5. Turn on time vs. LED current characteristics Load voltage: 6 V DC; Load resistance: 100 W Measured portion: between terminals 6 and 8 6. Repetitive peak OFF-state current vs. Load voltage characteristics LED current: 0 mA; Measured portion: between terminals 6 and 8; Ambient temperature: 25 C 77 F Ambient temperature, °C 02 0 4 0 6 0 80 85–30–40 –20 1.1 1.3 1.2 1.4 1.5 50mA 30mA 20mA 10mA LED dropout voltage, V LED current, mA 01 0 2 0 3 0 4 0 5 0 100Turn on time, µs Load voltage, V 0 20 40 60 80 10010–10 10–9 10–8 10–7 10–6 10–5 10–4 10–3 Repetitive peak OFF-state current, A 7. Hold current vs. Ambient temperature characteristics 8. Zero-cross voltage vs. Ambient temperature characteristics LED current: 10 mA –40 –20 0 2 04 06 0 80–30 85 AQH1213, AQH1223 AQH2213, AQH2223 AQH0213, AQH0223 AQH3213, AQH3223 Ambient temperature, °C Hold current, mA –40 –20 0 2 04 06 0 80–30 85 AQH0213, AQH1213, AQH2213, AQH3213 Ambient temperature, °C Zero-cross voltage, V SCHEMATIC AND WIRING DIAGRAMS Notes: E : Power source at input side; I F : Trigger LED forward current; V L : Load voltage; I L : Load current; Schematic Output configuration Load Wiring diagram 1a AC ZC Zero-cross circuit IF IL

8 Load

E1 VL (AC) IL Load VL (AC) IF IL E1 VL (AC) IL Load VL (AC)

  1. The following shows the packaging format mm inch 1) Tape and reel Type Tape dimensions Dimensions of paper tape reel 8-pin SMD type (1) When picked from 1/2/3/4-pin side: Part No. AQHmmmm AX (Shown above) (2) When picked from 5/6/8-pin side: Part No. AQHmmmm AZ 1.5 dia. .059 dia. +0.1 +.004 –00.3±0.05 .012±.002 Tractor feed holes Device mounted on tape Direction of picking 1.55±0.1 dia. .061±.004 dia. 4.5±0.3 .177±.012 2±0.1 .079±.004 10.1±0.1 .400±.004 4±0.1 .157±.004 1.75±0.1 .069±.004 10.2±0.1 .402±.00412±0.1 .472±.004 7.5±0.1 .295±.004 16±0.3 .630±.012 21±0.8 .827±.031 80±1 dia. 3.150±.039 dia. 13±0.5 dia. .512±.020 dia. 17.5±2.0 .689±.079 2±0.5 .079±.020 2±0.5 .079±.020 80±1 dia. 3.150±.039 dia. 300±2 dia. 11.811±.079 dia. CAUTIONS FOR USE 1. For cautions regarding use, please refer to ’03-’04 Solid State Relays catalog. 2. The internal IC could be damaged if a short forms between the I/O terminals while the solid state relay is powered. 3. Output spike voltages 1) The figure below shows an ordinary circuit. Please add a snubber circuit or varistor, as noise/surge on the load side could damage the unit or cause malfunctions. Note) Connection of an external resister, etc., to terminal No. 5 (gate) is not necessary. 2) Even if spike voltages generated at the load are limited with a clamp diode if the circuit wires are long, spike voltages will occur by inductance. Keep wires as short as possible to minimize inductance. 4. Ripple in the input power supply 1) For LED operate current at E min maintain min. 10 mA 2) Keep the LED operate current at 50 mA or less at E max 5. When soldering terminals, keep soldering time to within 10s at 260 C 500 F 6. Cleaning The solid state relay forms an optical path by coupling a light-emitting diode (LED) and photodiode via transparent silicon resin. For this reason, avoid ultrasonic cleansing if at all possible. We recommend cleaning with an organic solvent. If you cannot avoid using ultrasonic cleansing, please ensure that the following conditions are met, and check beforehand for defects.
  • Frequency: 27 to 29 kHz
  • Ultrasonic output: No greater than 0.25 W/cm
  • Cleaning time: No longer than 30 seconds
  • Cleanser used: Asahiklin AK-225
  • Other: Submerge in solvent in order to prevent the PCB and elements from being contacted directly by the ultrasonic vibrations. Note: Applies to unit area ultrasonic output for ultrasonic baths. 7. Soldering 1) When soldering PC board terminals, keep soldering time to within 10 s at 260 C 500 2) When soldering surface-mount terminals, the following conditions are recommended. (1) IR (Infrared reflow) soldering method (2) Vapor phase soldering method (3) Double wave soldering method (4) Soldering iron method Tip temperature: 280 to 300 C 536 to 572 F Wattage: 30 to 60 W Soldering time: within 5 seconds (5) Others Check mounting conditions before using other soldering methods (hot-air, hot plate, pulse heater, etc.)
  • The temperature profile indicates the temperature of the soldered terminal on the surface of the PC board. The ambient temperature may increase excessively. Check the temperature under mounting conditions.
  • The conditions for the infrared reflow soldering apply when preheating using the VPS method. Load VL(AC) Emin. Emax. T1 = 155 to 165°C 311 to 329°F T2 = 180°C 200°C 356 to 392°F T3 = 245°C 473°F or less t1 = 120 s or less t2 = 30 s or less t1 t2 t1 t2 T1 = 180 to 200°C 366 to 392°F T2 = 215°C 419°F or less t1 = 40 s t2 = 90 s or less (40 s: SOP type) t1 t2 t3 T1 = 155 to 165°C 311 to 329°F T2 = 260°C 500°F or less t1 = 60 s or less t2+t3 = 5 s or less

2) Tube Devices are packaged in a tube so pin No. 1 is on the stopper B side. Observe correct orientation when mounting them on PC boards. (DIP type) 9. Transportation and storage 1) Extreme vibration during transport will warp the lead or damage the relay. Handle the outer and inner boxes with care. 2) Storage under extreme conditions will cause soldering degradation, external appearance defects, and deterioration of the characteristics. The following storage conditions are recommended:

  • Temperature: 0 to 45 C 32 to 113 F
  • Humidity: Less than 70% R.H.
  • Atomosphere: No harmful gasses such as sulfurous acid gas, minimal dust. StopperB StopperA

Specifications are subject to change without notice. Printed in Japan. Automation Controls Company Head Office: 1048, Kadoma, Kadoma-shi, Osaka 571-8686, Japan Telephone: Japan (81) Osaka (06) 6908-1050 Facsimile: Japan (81) Osaka (06) 6908-5781 http://www.nais-e.com/ COPYRIGHT © 2003 All Rights Reserved Matsushita Electric Works, Ltd. These materials are printed on ECF pulp. These materials are printed with earth-friendly vegetable-based (soybean oil) ink. North America Europe : http://www.aromat.com/ : http://www.mew-europe.com/ Asia & others

  • (Japanese)
  • (Chinese) : http://www.nais-e.com/ : http://www.mac-j.co.jp/ : http://www.cmew.com.cn/ Internet Homepage