DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
VER : A_0 update : 2018.06.01 A C - D C I T E S w i t c h i n g P o w e r S u p p l y AQF700 SERIES 700 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. AQF700-12S AQF700-15S AQ F700-24S AQF700-28S AQF700-48S Max Output Wattage (W) Vin:115(V.AC) 600W 675W Vin:230(V.AC) 625W 700W Input Voltage 90-264 VAC Frequency (Hz) 50 / 60 Hz Current (Full load) <8 A max. (115 VAC) / <3.5 A max. (230 VAC) Inrush Current (<2ms) (Clod Start) < 55 A max. (115 VAC) / < 90 A max. (230 VAC) Leakage Current < 0.1 mA max. (Input-Output) Power Factor (at 230 VAC) PF>0.9 at Full Load Output Voltage (V.DC.) 12V 15V 24V 28V 48V Voltage Accuracy ±2% Voltage Adj. Range (V.DC) ±4% Output Voltage Line Regulation (115-264 VAC) ±0.5% Load Regulation (10-100%) (typ.) ±1% Minimum Load 1% Maximum Capacitive Load 5,000µF 3,750µF 2,500µF 2,000µF 1,250µF Ripple & Noise (typ.) 160mV 160mV 240mV 280 mV 480mV Efficiency (at 230 VAC) 89% 90% 91% 92% 92% Hold-up Time (at 115 VAC) 5 ms min. Protection Over Power Protection Auto recovery Over Voltage Protection Auto recovery Overt Temperature Protection Auto recovery Short Circuit Protection Auto recovery or Latch Isolation Input-Output (V.AC) 4000VAC or 5656VDC Input-PE (V.AC) 2000V Output-PE . (V.AC) 1500V Function 5V Stand by 5VSB: 5V@1A ; Tolerance 10% DC OK Signal (Power Good) Turn ON: 3.7~5.7V ; Turn OFF: 0~1V Remote Control +RC / -RC: Power ON=open ; Power OFF=short KEY FEATURES Enclosed ITE Switching Power Supply Remote ON/OFF Function Standby 5V@1A High Efficiency up to 92% With P.F.C. Function >0.9 Ultra Compact Size: 6.7 x 3.66 x 1.61 Inches 3-Year Product Warranty (In Progress)
VER : A_0 update : 2018.06.01 A C - D C I T E S w i t c h i n g P o w e r S u p p l y AQF700 SERIES 700 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. AQF700-12S AQF700-15S AQF700-24S AQF700-28S AQF700-48S Environment Operating Temperature -30°C…+70°C (with derating) Storage Temperature -35°C…+85°C Temperature Coefficient Altitude During Operation 5000m Humidity 95% RH Atmospheric Pressure 56 kPa to 106 kPa MTBF >100,000 h @ 25°C (MIL-HDBK-217F) Vibration 10~500Hz, 2G 10min./1cycle, 60min. each along X, Y , Z axes. Weight In Progress Safety Approval UL / IEC / EN 62368 (In Progress) EMC Conducted and Radiated EMI EN55032 / EN55011 (conducted class B, Radiated Class A) (In Progress) EMS EN55024 / EN60601-1-2 4th edition (In Progress) NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth by using a 6” twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. 2. Hold-up Time measured at 90% Vout. 3. Strongly recommend to conduct this test with DC Voltage. If customer wishes to test with AC Voltage, please disconnect all Y-Capacitors within Arch power supply. DERATING
VER : A_0 update : 2018.06.01 A C - D C I T E S w i t c h i n g P o w e r S u p p l y AQF700 SERIES 700 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3- MECHANICAL DIMENSION ( Top View ) PIN# Single Terminal AC Input Connector Pin 1 PE ANYTEK YK-301-3P 2 AC IN (N)
3 AC IN (L)
4 +DC OUT M5 Pan HD screw in 2 positions Torque to 8 Ibs-in(90 cNm) max. 5 -DC OUT Connector Pin (CN1) = Cherng Weei PHD2.0 - 2x4P PIN# Single Mating Housing Terminal C1 +S Cherng Weei PHD2.0 - 2x4P or equivalent Cherng Weei PHD2.0 - 2x4P or equivalent C2 -S C3 NC C4 -5V SB C5 GND / -RC C6 +RC C7 PG C8 +5V SB ASSEMBLY INSTRUCTIONS *U Case T=2.0mm Customer is advised to screw into the threads no more than 2.5mm A=For fixture to din rail clip only B=For fixture to pcb/chassis only A=M3x0.5P B=M3x0.5P
VER : A_0 update : 2018.06.01 A C - D C I T E S w i t c h i n g P o w e r S u p p l y AQF700 SERIES 700 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -4- FUNCTION DESCRIPITON of CN1 Pin No. Function Description C1 +S Remote sensing (+) C2 -S Remote sensing (-) C3 NC C4 -5V SB This pin connects to the negative terminal(-V) C5 GND / -RC This pin connects to the negative terminal(-V). Return for DC-OK signal output. C6 +RC Turns the output on and off by electr ical or dry contact between pin C5 (GND / -RC), Short: Power OFF, Open: Power ON. C7 +PG DC-OK Signal is a DC output. (DC-OK ) C8 +5V SB Stand by voltage output ground 4.5~5.5V, referenced to pin C4 or C5(GND). The maximum load current is 1A. BLOCK DIAGRAM