AQ7520-08UTG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

Applications

Note: This package image is for example and reference only. for detail package drawing, please refer to the package section in this datasheet. Pinout Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ■ ESD, IEC 61000-4-2, ±12kV contact, ±15kV air ■ ESD, ISO 10605, 330pF 330Ω, ±12kV contact, ±12kV air ■ EFT , IEC 61000-4-4, 40A (5/50ns) ■ Maximum surge tolerance, IEC 61000- 4-5 2nd edition, 6A (tP=8/20μs) ■ Low capacitance of 0.32pF@1 .5V (TYP) ■ Low leakage current of 0.02μA (TYP) at 3.3V ■ Low operating and clamping voltage ■ AEC-Q101 qualified and PPAP capable ■ Halogen free, Lead free and RoHS compliant ■ Moisture Sensitivity Level (MSL -1) 12 45 6 78 9 G,3 ■ V-By-One ■ Embedded DisplayPort ■ USB 2.0/3.0/3.1 Ports ■ Automotive ■ Flat Panel Displays ■ LCD/LED TVs ■ Smartphones ■ Mobile Computing 789 453

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 03/31/22 AQ7520-08UTG 0.32pF 12kV Diode Array, Low Capacitance ESD Protection Absolute Maximum Ratings Caution: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 6.0 A TOP Operating Temperature -40 to 150 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (TOP=25ºC) Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM Pin-1,-2,-4,-5,-6,-7 ,-8,-9 to pin-3 3.3 V Breakdown Voltage VBR IR=1mA 6.5 8.5 V Reverse Leakage Current ILEAK VR=3.3V 0.02 0.1 μA Holding Voltage VHOLD I/O to GND 1. 7 V Clamp Voltage1 VC IPP=1A, tp=8/20μs 2.7 3.5 V IPP=6A, tp=8/20μs 4.0 6.0 Dynamic Resistance2 RDYN TLP , tP=100ns 0.25 Ω ESD Withstand Voltage1,3 VESD IEC 61000-4-2 (Contact Discharge) ±12 kV IEC 61000-4-2 (Air Discharge) ±15 kV Diode Capacitance1 CI/O-GND Reverse Bias=1 .5V , f=1MHz 0.32 0.4 pF Capacitance vs. Reverse Bias 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Capacitance (pF) Bias Voltage (V) Notes: 1. Parameter is guaranteed by design and/or component characterization. 2. Transmission Line Pulse (TLP) with 100ns width, 0.2ns rise time, and average window t1=70ns to t2= 90ns 3. Device stressed with ten non-repetitive ESD pulses. Clamping Voltage vs IPP 0.0 1.0 2.0 3.0 4.0 5.0 Clamp Voltage (VC) Peak Pulse Current-IPP (A)

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 03/31/22 AQ7520-08UTG 0.32pF 12kV Diode Array, Low Capacitance ESD Protection Positive T ransmission Line Pulsing (TLP) Plot 05 10 15 20 25 TLP Voltage (V) TLP Current (A)TLP Current (A) -20 -18 -16 -14 -12 -10 -10- 8- 6- 4- 20 TLP Voltage (V) TLP Current (A) Negative T ransmission Line Pulsing (TLP) Plot IEC 61000-4-2 +8 kV Contact ESD Clamping Voltage IEC 61000-4-2 -8 kV Contact ESD Clamping Voltage ISO10605 Contact Discharge Plot at +8KV ISO10605 Contact Discharge Plot at -8 kV -30V -50V -60V -90V -40V -10V -20V -70V -80V -20 ns 0 s 20 ns 40 ns 60 ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns-20 ns 0 s 20 ns 40 ns 60 ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns 50V 30V 20V -10V 40V 80V 70V 60V 10V -20 ns 0 s 20 ns 40 ns 60 ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns 50V 30V 20V -10V 40V 80V 70V 60V 10V -30V -50V -60V -90V -40V -10V -20V -70V -80V -20 ns 0 s 20 ns 40 ns 60 ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 03/31/22 AQ7520-08UTG 0.32pF 12kV Diode Array, Low Capacitance ESD Protection Part Number Package Min. Order Qty. AQ7520-08UTG μDFN-9 3000 Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-dow Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Ordering Information Product Characteristics Part Marking System Part Numbering System AQ 7520 U Series Package U=/uni03BCDFN-9 (3.8x1.0mm) Automotive Grade TVS Diode Arrays (SPA Diodes)® -08 Number of Channels TG TG= Tape & Reel x Product Series Date Code AQ7520U Assembly Code Lead Plating Matte Tin Lead material Copper Alloy Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 03/31/22 AQ7520-08UTG 0.32pF 12kV Diode Array, Low Capacitance ESD Protection Package Dimensions Embossed Carrier Tape & Reel Specification Symbol Millimeters A0 1 .35 +/- 0.10 B0 4.00 +/- 0.05 D1 Ø 1 .00 +/-0.05 E 1 .75 +/- 0.10 F 5.50 +/- 0.05 K0 0.72 +/- 0.05 P 4.00 +/- 0.10 P0 4.00 +/- 0.10 P2 2.00 +/- 0.05 T 0.25 +/- 0.02 0.80mm 0.90mm0.90mm 0.25mm x9 1.30mm 0.40mm 0.40mm Recommended Soldering Pattern 1 2 3 4 5 6789 b e/2 e1 e e1 L Bottom View Front View Top View 5° Max ,Ref. ,Ref. ,Ref.8mm Tape and Reel T F E W 5º Max 5º Max User Feeding Direction Pin 1 Location μDFN-9 (3.8x1.0mm) Symbol Millimeters Inches Min Nom Max Min Nom Max A1 - 0.02 0.05 - 0.001 0.002 e 0.80 BSC 0.031 BSC e1 0.90 BSC 0.035 BSC Product Disclaimer: Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and