AQ4337-01ETG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

Applications

Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ■ ESD, IEC 61000-4-2, ±15kV contact/air ■ ESD, ISO10605 330pF 330Ω, ±15kV contact/air ■ EFT , IEC 61000-4-4, 40A (5/50ns) ■ Maximum surge tolerance, IEC 61000-4-5, 2nd Edition, 7A (8/20μs) ■ Low leakage current of 0.1μA (MAX) at 5V ■ Ultra low capacitance of 0.25pF (Typ @ VR=0V) ■ Small SOD882 packaging helps save board space ■ Halogen-free, lead-free and RoHS compliant ■ Moisture Sensitivity Level (MSL -1) ■ AEC-Q101 Qualified and PPAP Capable ■ Automotive ADAS ■ Automotive DisplayPort ■ GMSL ■ GVIF ■ LVDS ■ 2.5/5G/10G Ethernet

0201 Flipchip

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.08/02/22 AQ4337-01ETG 0.25pF, 7A, Low Clamping Voltage, Bidirectional TVS, Ultra Low Capacitance ESD Protection Absolute Maximum Ratings CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 7. 0 A TOP Operating Temperature -40 to 150 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (T OP=25ºC) Note: 1. Parameter is guaranteed by design and/or component characterization. 2. Transmission Line Pulse (TLP) with 100ns width, 0.2ns rise time, and average window t1=70ns to t2= 90ns 3. Device stressed with ten non-repetitive ESD pulses. Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM 5 V Breakdown Voltage VBR IR=1mA 8.0 V Reverse Leakage Current ILEAK VR=5V 10 100 nA Clamp Voltage1 VC IPP=1A, tp=8/20μs, I/O to GND 3.8 V IPP=7A, tp=8/20μs, I/O to GND 6.5 V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to GND 0.35 Ω ESD Withstand Voltage1,3 VESD IEC 61000-4-2 (Contct Discharge) ±15 kV IEC 61000-4-2 (Air Discharge) ±15 kV ISO10605 (Contact Discharge) ±15 kV ISO10605 (Air Discharge) ±15 kV Diode Capacitance1 CIO-GND Reverse Bias=0V , f=1MHz, I/O to GND 0.25 pF Clamping Voltage vs IPP Peak Pulse Current-IPP (A) Clamp Voltage (VC) 0.0 2.0 4.0 6.0 8.0 10.0 123456 7 Capacitance vs. Reverse Bias 0.10 0.20 0.30 0.40 0.50 012345 Capacitance (pF) Bias Voltage (V)

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.08/02/22 AQ4337-01ETG 0.25pF, 7A, Low Clamping Voltage, Bidirectional TVS, Ultra Low Capacitance ESD Protection Positive T ransmission Line Pulsing (TLP) Plot 05 10 15 20 TLP Voltage TLP Current (A) -20 -18 -16 -14 -12 -10 -20- 15 -10- 50 TLP Voltage TLP Current (A) Negative T ransmission Line Pulsing (TLP) Plot IEC 61000-4-2 +8 kV Contact ESD Clamping Voltage 50V 30 V 20V -10V 40V -20 ns 0 s 20 ns 40 ns 60 ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns 80V 70V 60V 10V -30V -50V -60V -90V -40V -20 ns 0 s 20 ns 40 ns 60ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns -10V -20V -70V -80V IEC 61000-4-2 -8 kV Contact ESD Clamping Voltage ISO10605 Contact Discharge Plot at +8 kV 50V 30V 20V -10V 40V -20 ns 0 s 20 ns 60 40 ns ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns 80V 70V 60V 10V -30V -50V -60V -90V -40V -20 ns 0 s 20 ns 40 ns 60ns 80 ns 100 ns 120 ns 140 ns 160 ns 180 ns -10V -20V -70V -80V ISO10605 Contact Discharge Plot at -8 kV

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.08/02/22 AQ4337-01ETG 0.25pF, 7A, Low Clamping Voltage, Bidirectional TVS, Ultra Low Capacitance ESD Protection Part Number Package Min. Order Qty. AQ4337-01ETG SOD882 10000 Lead Plating Pre-Plated Frame Lead material Copper Alloy Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0 Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters

Ordering Information

Part Marking System Part Numbering System AQ 4337 01 Series Number of Channels Package E: SOD882 Automotive Grade TVS Diode Arrays (SPA Diodes) E TG TG= Tape & Reel J * J : Part Code *: Date Code 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (μs) Percent of IPP

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.08/02/22 AQ4337-01ETG 0.25pF, 7A, Low Clamping Voltage, Bidirectional TVS, Ultra Low Capacitance ESD Protection Embossed Carrier Tape & Reel Specification — SOD882 Product Disclaimer: Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Symbol Millimeters Inches Min Nom Max Min Nom Max Recommended Soldering Pad Layout 0.325 0.325 0.650 0.975 0.650 EE FF ee Bottom View Top View Side View 7 ' <<9,(: Symbol Millimeters A0 0.70+/-0.045 B0 1. 10+/-0.045 D0 1 .55+/-0.05 D1 0.40+/-0.05 E1 1 .75+/-0.10 F 3.50+/-0.05 K0 0.65+/-0.045 P0 4.00+/-0.10 P1 2.00+/-0.10 P2 2.00+/-0.05 T 0.20+/-0.05 W 8.00+0.30/ -0.10 Access Hole, Ref. 14.4mm, Ref. 13mm 8.4mm, Ref. 180mm 60mm 8mm Tape and Reel