AQ1210-01ETG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

TVS Diode Arrays (SPA® Diodes) Datasheet © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/21 AQ1210-01ETG Bidirectional Discrete TVS Diode, General Purpose Surge Protection The AQ1210-01ETG bidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic discharge) protection level for electronic equipment. The AQ1210-01ETG TVS can safely absorb repetitive ESD strikes of ±30 kV (contact and air discharge as defined in IEC 61000-4-2) without any performance degradation. Additional, each TVS can safely dissipate a 15A 8/20us surge event as defined in IEC 61000- 4-5 2 nd edition.

Description

Features & Benefits

Applications

Note: This package image is for example and reference only. for detail package drawing, please refer to the package section in this datasheet. Pinout

0201 Flipchip

■ Switches / Buttons ■ Test Equipment / Instrumentation ■ Point-of-Sale Terminals ■ Medical Equipment ■ Automotive ■ Computer Peripherals ■ Battery Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ■ ESD, IEC 61000-4-2, ±30kV contact, ±30kV air ■ EFT , IEC 61000-4-4, 40A (5/50ns) ■ Surge tolerance, IEC 61000-4- 5 2nd Edition, 15A (8/20us) ■ ESD, ISO 10605, 330pF 330Ω, ±30kV contact, ±30kV air ■ Low leakage current of 0.02μA (TYP) at 5V ■ Halogen free, lead free and RoHS compliant ■ Moisture Sensitivity Level (MSL -1) ■ AECQ-101 qualified and PPAP capable

TVS Diode Arrays (SPA® Diodes) Datasheet © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/21 AQ1210-01ETG Bidirectional Discrete TVS Diode, General Purpose Surge Protection Absolute Maximum Ratings CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 15 A TOP Operating Temperature -40 to 150 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (T OP=25ºC) Note: 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 0.2ns rise time, and average window t1=70ns to t2= 90ns Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR=1μA 5 V Breakdown Voltage VBR IR=1mA 5.2 5.5 V Reverse Leakage Current ILEAK VR=5V 0.02 0.1 μA Clamp Voltage1 VC IPP=15A, tp=8/20μs 11 V Dynamic Resistance2 RDYN TLP , tP=100ns 0.11 Ω ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CIO-GND Reverse Bias=0V , f=1MHz 25 pF Capacitance vs Reverse Bias 0.0 6.0 12.0 18.0 24.0 30.0 01234 5 Capacitance (pF) Bias Voltage (V) Clamping Voltage vs. IPP 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 1 357 91 11 31 5 Clamp Voltage (VC) Peak Pulse Current - IPP(A) Pin1 to Pin2 Pin2 to Pin1

TVS Diode Arrays (SPA® Diodes) Datasheet © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/21 AQ1210-01ETG Bidirectional Discrete TVS Diode, General Purpose Surge Protection Positive T ransmission Line Pulsing (TLP) Plot 0123456789 10 11 12 TLP Voltage (V) TLP Current (A)TLP Current (A) -24 -22 -20 -18 -16 -14 -12 -10 TLP Voltage (V) TLP Current (A) Negative T ransmission Line Pulsing (TLP) Plot IEC 61000-4-2 +8 kV Contact ESD Clamping Voltage IEC 61000-4-2 -8 kV Contact ESD Clamping Voltage ISO10605 contact discharge plot at +8 kV ISO10605 contact discharge plot at -8 kV

TVS Diode Arrays (SPA® Diodes) Datasheet © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/21 AQ1210-01ETG Bidirectional Discrete TVS Diode, General Purpose Surge Protection Part Number Package Min. Order Qty. AQ1210-01ETG SOD882 10,000 Lead Plating Matte Tin Lead material Copper Alloy Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0 Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-dow Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters

Ordering Information

E: SOD882 T= Tape & Reel G= Green Automotive Grade TVS Diode Arrays (SPA Diodes) E Date code Q: Part code Part Marking System Part Numbering System 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP

TVS Diode Arrays (SPA® Diodes) Datasheet © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/31/21 AQ1210-01ETG Bidirectional Discrete TVS Diode, General Purpose Surge Protection Drawing# : E03-B D E TOP VIEW BOTTOM VIEW-1 e Recommended Soldering Pattern 0.30mm0.35mm 1.00mm 0.60mm SIDE VIEW A h h Symbol SOD882 Millimeters Inches Min Ty p Max Min Ty p Max e 0.65 BSC 0.026 BSC Symbol Millimeters A0 0.70+/-0.045 B0 1 .10+/-0.045 K0 0.65+/-0.045 F 3.50+/-0.05 P1 2.00+/-0.10 ,Ref. ,Ref. ,Ref. 8mm TAPE AND REEL Embossed Carrier Tape & Reel Specification — SOD882 Product Disclaimer: Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to