AQXX-01FTG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Features

  • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air
  • EFT , IEC 61000-4-4, 40A (5/50ns)
  • Lightning, 30A (8/20 as defined in IEC 61000-4-5 2nd edition) for the AQ05
  • Low clamping voltage
  • PPAP capable
  • Low leakage current
  • Small SOD323 package fits 0805 footprints
  • AEC-Q101 qualified
  • Moisture Sensitivity Level(MSL -1)
  • Halogen free, lead free and RoHS compliant
  • Switches / Buttons
  • Test Equipment / Instrumentation
  • Point-of-Sale Terminals
  • Medical Equipment
  • Notebooks / Desktops / Servers
  • Computer Peripherals
  • CAN Bus protection
  • Automotive applications Pinout and Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. AQxx-01FTG Series 450W Unidirectional TVS Diode RoHS Pb GREEN

General Purpose ESD Protection - AQxx-01FTG Series TVS Diode Array (SPA® Diodes) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18 Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units Ppk Peak Pulse Power (tp=8/20μs) 450 W TOP Operating Temperature -40 to 150 °C TSTOR Storage Temperature -55 to 150 °C Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA 5.0 V Breakdown Voltage VBR IR=1mA 6.0 V Reverse Leakage Current ILEAK VR=5V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 9.8 V IPP=10A, tP=8/20μs, Fwd 13.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to Ground 0.22 Ω Peak Pulse Current Ipp tp=8/20µs 30.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CIO-GND Reverse Bias=0V , f=1MHz 350 pF Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA 12.0 V Breakdown Voltage VBR IR=1mA 13.3 V Reverse Leakage Current ILEAK VR=12V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 18.5 V IPP=10A, tP=8/20μs, Fwd 22.5 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to Ground 0.29 Ω Peak Pulse Current Ipp tp=8/20µs 1 7. 0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CIO-GND Reverse Bias=0V , f=1MHz 150 pF

General Purpose ESD Protection - AQxx-01FTG Series TVS Diode Array (SPA® Diodes) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18 Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA 15.0 V Breakdown Voltage VBR IR=1mA 16.7 V Reverse Leakage Current ILEAK VR=15V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 24.0 V IPP=10A, tp=8/20µs, Fwd 30.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to Ground 0.34 Ω Peak Pulse Current Ipp tp=8/20µs 12.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-GND Reverse Bias=0V , f=1MHz 100 pF Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA 24.0 V Breakdown Voltage VBR IR=1mA 26.7 V Reverse Leakage Current ILEAK VR=24V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 34.0 V IPP=5A, tp=8/20µs, Fwd 42.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to Ground 0.49 Ω Peak Pulse Current Ipp tp=8/20µs 7. 0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-GND Reverse Bias=0V , f=1MHz 65 pF Note: 1 . Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA 36.0 V Breakdown Voltage VBR IR=1mA 40.0 V Reverse Leakage Current ILEAK VR=36V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 50.0 V IPP=5A, tp=8/20µs, Fwd 62.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to Ground 0.61 Ω Peak Pulse Current Ipp tp=8/20µs 5.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-GND Reverse Bias=0V , f=1MHz 50 pF

General Purpose ESD Protection - AQxx-01FTG Series TVS Diode Array (SPA® Diodes) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP Power Derating Curve 100 110 02 55 07 51 00 1251 50 Ambient Temperature - TA (oC) % of Rated Power I PP Non-Repetitive Peak Pulse Power vs. Pulse Time Pulse Duration - tp (µs) Peak Pulse Power - P pk (kW) 0.01 0.1 0.11 10 100 1000 Capacitance vs. Bias 120 150 180 210 240 270 300 0369 12 15 18 21 24 27 30 33 36 Capacitance (pF) Bias Voltage (V) SD36CSD24C AQ05 AQ15 AQ24 AQ36 AQ12 AQ05 T ransmission Line Pulsing(TLP) Plot 02468 10 12 14 TLP Voltage (V) TLP Current (A) AQ12 T ransmission Line Pulsing(TLP) Plot 0246 81 01 21 41 61 82 02 2 TLP Voltage (V) TLP Current (A)

General Purpose ESD Protection - AQxx-01FTG Series TVS Diode Array (SPA® Diodes) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18 AQ15 T ransmission Line Pulsing(TLP) Plot 0246 81 01 21 41 61 82 02 22 42 62 8 TLP Voltage (V) TLP Current (A) AQ24 T ransmission Line Pulsing(TLP) Plot 05 10 15 20 25 30 35 40 TLP Voltage (V) TLP Current (A) AQ36 T ransmission Line Pulsing(TLP) Plot 05 10 15 20 25 30 35 40 45 50 55 60 TLP Voltage (V) TLP Current (A) Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Product Characteristics Lead Plating Matte Tin Lead Material Alloy 42 Lead Coplanarity 0.0004 inches (0.102mm) Substrate material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0

General Purpose ESD Protection - AQxx-01FTG Series TVS Diode Array (SPA® Diodes) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18 Part Numbering System Part Marking System AQ ** 01 T G Voltage Number of Channels Package T= Tape & Reel G= Green Automotive Grade TVS Diode Arrays (SPA Diodes) F: SOD323 F Blank: SD05-01FTG 1: SD12-01FTG 2: SD15-01FTG 3: SD24-01FTG 4: SD36-01FTG

Ordering Information

Part Number Package Min. Order Qty. AQ05-01FTG SOD323 3000 AQ12-01FTG SOD323 3000 AQ15-01FTG SOD323 3000 AQ24-01FTG SOD323 3000 AQ36-01FTG SOD323 3000 E b c D A1 A2 A 0.2 0.45 2.30 2.80 1.80 Recommended Solder Pad Unit: mm Symbol SOD323 Millimeters Inches Min Max Min Max A - 1 .00 - 0.039 A1 0.00 0.10 0.000 0.004 A2 0.80 0.90 0.031 0.035 b 0.25 0.35 0.010 0.014 c 0.08 0.15 0.003 0.006 D 1 .20 1 .40 0.047 0.055 E 1 .60 1 .80 0.063 0.071 E1 2.50 2.70 0.098 0.106 L1 0.25 0.40 0.010 0.016 Blank: AQ05-01FTG 1: AQ12-01FTG 2: AQ15-01FTG 3: AQ24-01FTG 4: AQ36-01FTG 2 1

General Purpose ESD Protection - AQxx-01FTG Series TVS Diode Array (SPA® Diodes) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/15/18 Embossed Carrier T ape & Reel Specification — SOD323 Symbol Millimeters A0 1 .36min/1 .62max B0 2.90+/-0.10 W 8.0+0.3/-0.10 D0 1 .50+0.10 D1 ø1 .00min/ø1 .25max E 1 .75+/-0.10 E2 - F 3.50+/-0.05 P0 4.00+/-0.10 P 4.00+/-0.10 P1 2.00+/-0.05 K0 1 .15min/1 .45max T 0.254+/-0.13 ,Ref. ,Ref. ,Ref. 8mm TAPE AND REEL Pin1 Component Orientation in Tape Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.