AQ1003 LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air
  • EFT , IEC 61000-4-4, 40A (5/50ns)
  • Lightning, IEC 61000-4-5 2nd edition, 7A (8/20µs)
  • Low leakage current of 100nA (MAX) at 5V
  • Tiny SOD882 (JEDEC MO-236) package saves board space
  • Fits solder footprint of industry standard 0402 (1005) components
  • AEC-Q101 qualified
  • Halogen free, Lead free and RoHS compliant
  • Mobile phones
  • Smart phones
  • PDAs
  • Portable navigation components
  • Digital cameras
  • Portable medical components
  • Automotive applications Pinout Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb GREEN Application Example GND Signal Ground I/O port ControllerLow-speed por t Outside World(4) AQ1003-01 Signal Ground I/O port ControllerLow-speed por t AQ1003 Series - 30pF 30kV Unidirectional Discrete TVS AQ1003 Series

©2017 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 11/09/17 General Purpose ESD Protection - SP1003 Series 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 1 2 3 4 5 6 7 Peak Pulse Current-IPP (A) Clamp Voltage (VC) CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Pulse Current (tp=8/20μs) 7. 0 A TOP Operating Temperature -40 to 150 °C TSTOR Storage Temperature -55 to 150 °C Thermal Information Parameter Rating Units Maximum Junction Temperature 150 °C Maximum Lead Temperature (Soldering 20-40s) 260 °C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Forward Voltage Drop VF IF = 10mA 0.8 1. 2 V Reverse Voltage Drop VR IR=1mA 6.0 7. 8 8.5 V Reverse Standoff Voltage VRWM IR≤1µA 5.0 V Reverse Leakage Current ILEAK VR=5V 100 nA Clamp Voltage1 VC Ipp=6A tp=8/20µs 11. 4 V Ipp=7A tp=8/20µs 12.0 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to GND 0.25 Ω ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CD Reverse Bias=0V 30 pF Note: 1 Parameter is guaranteed by design and/or component characterization.

2 Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns

Capacitance vs. Reverse Bias Clamping Voltage vs. IPP 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 DC Bias (V) Capacitance (pF) AQ1003 Series

©2017 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 11/09/17 General Purpose ESD Protection - SP1003 Series 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 0 10 20 30 40 50 Temperature (ºC) Leakage Current (nA) Leakage vs. T emperatureT ransmission Line Pulsing(TLP) Plot 0246 81 01 21 41 61 8 TLP Voltage (V) TLP Cu rrent (A) Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters AQ1003 Series

©2017 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 11/09/17 General Purpose ESD Protection - SP1003 Series Product Characteristics Lead Plating Pre-Plated Frame Lead Material Copper Alloy Substrate material Silicon Body Material Molded Epoxy Flammability UL Recognized epoxy meeting flammability rating V-0. Notes : 1 . All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. Package surface matte finish VDI 11-13. Part Numbering System Part Marking System AQ 1003 T G Series Package T= Tape & Reel G= Green E: SOD882 Number of Channels -01 = 1 Channel 01 E Automotive Grade TVS Diode Arrays (SPA Diodes) C Product ID Pin1 Indicator SOD723 C SOD882 Product ID Pin1 Indicator D EA L b e Recommended Soldering Pad Layout 0.325 0.325 0.650 0.975 0.650 Symbol JEDEC MO-236 Millimeters Inches Min Max Min Max A 0.36 0.42 0.014 0.017 b 0.45 0.55 0.018 0.022 L 0.20 0.30 0.008 0.012 e 0.65 0.026 D 0.93 1 .07 0.037 0.042 E 0.53 0.67 0.021 0.026 AQ1003 Series

Ordering Information

Part Number Package Marking Min. Order Qty. AQ1003-01ETG SOD882 C 10000

©2017 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 11/09/17 General Purpose ESD Protection - SP1003 Series Embossed Carrier T ape & Reel Specification — SOD882 Symbol Millimetres Inches Min Max Min Max A 0.65 0.70 0.026 0.028 B 1. 10 1 .20 0.043 0.047 C 0.50 0.60 0.020 0.024 dØ 1 .40 1 .60 0.055 0.063 E 1 .65 1 .85 0.065 0.073 F 3.40 3.60 0.134 0.142 P0 3.90 4.10 0.154 0.161 P 1 .90 2.10 0.075 0.083 P1 1 .90 2.10 0.075 0.083 W 7 .90 8.10 0.311 0.319 User Feeding Direction Pin 1 Location Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 8mm TAPE AND REEL AQ1003 Series