APXJ2R5ARA821MF80G NPC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. NPCAP TM -PXJSeries ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・Rated voltage range : 2.5 to 25Vdc, Capacitance range : 82 to 820µF ・Case size range :φ6.3×7.7L ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range 2.5 to 25Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Surge Voltage Rated voltage×1.15 (at 105℃) Leakage Current Shall not exceed values shown in STANDARD RATINGS. (at 20℃ after 2 minutes) Dissipation Factor (tanЎ) 0.12 max. (at 20℃, 120Hz) Low Temperature Characteristics (Max. Impedance Ratio) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] 0.3max. W P φD±0.5 B±0.2 C±0.2 A±0.2
- Terminal Code : A L±0.3 Size Code F80 6.3 L 7.7 A 6.6 B 6.6 C 7.2 W 0.5 to 0.8 P 1.9 φD ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Taping code Terminal code Voltage code (ex. 2.5V:2R5, 10V:100) Series code Category A P X J A R A GM F 8 0 1 3 42 6 7 8 9 10 13125 18171611 1514 Please refer to "Product code guide (conductive polymer type)" Capacitance code (ex. 82µF:820, 390µF:391) Downsizing PXJ PXG P32 ◆MARKING J57A 820 2.5V EX) 2.5V820µF New! CAT. No. E1001P CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. NPCAP TM -PXJSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code Leakage current (µA max./after 2min.) ESR (mЊ max./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. 2.5 820 F80 1,020 7 5,000 APXJ2R5ARA821MF80G 6.3 560 F80 1,760 8 5,000 APXJ6R3ARA561MF80G 10 390 F80 1,950 13 4,460 APXJ100ARA391MF80G 16 270 F80 864 13 4,460 APXJ160ARA271MF80G 20 150 F80 600 18 3,790 APXJ200ARA151MF80G 25 82 F80 410 28 3,040 APXJ250ARA820MF80G New! CAT. No. E1001P CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS