APXG200ARA270ME46G

APXG160ARA390ME46G CHEMI-CON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Surface Mount NPCAP TM -PXGSeries ・Super low ESR, high ripple current capability ・Rated voltage range : 16 to 25Vdc, Capacitance range : 10 to 1,000µF ・Case size : φ5×4.5L toφ10×12.2L ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range 16 to 25Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Surge Voltage Rated voltage×1.15 (at 105℃) Leakage Current Shall not exceed values shown in STANDARD RATINGS. (at 20℃ after 2 minutes) Dissipation Factor (tanЎ) 0.12 max. (at 20℃, 120Hz) Low Temperature Characteristics (Max. Impedance Ratio) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (E46,F45 : 3,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours (E46,F45 : 500 hours). Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ)and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] 0.3max. W P Size Code E46 F45 φD 6.3 L 4.5 4.4 A 5.3 6.6 B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9

• Terminal Code : AφD±0.5 B±0.2 C±0.2 A±0.2 F61 JA0 6.3 6.3 5.8 10.0 6.6 10.3 10.3 6.6 10.3 10.3 7.2 11.0 11.0 0.5 to 0.8 0.7 to 1.1 1.9 4.5 4.5 J80 0.7 to 1.1 HA0 8 10.0 8.3 8.3 H80 8 7.7 7.7 L±0.3 (Note) Note : L+0.1/-0.2 for E46 and F45 L±0.5 for HA0, JA0 and JC0 ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Taping code Terminal code Voltage code (ex. 16V:160, 20V:200) Series code Category A P X G A R A GM 1 3 42 6 7 8 9 10 13125 18171611 1514 Capacitance code (ex. 47µF:470, 100µF:101) Please refer to "Product code guide (conductive polymer type)" Downsized PXG PXE P40 ◆MARKING EX) 25V47µF G14A 25V CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Surface Mount NPCAP TM -PXGSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code Leakage current (µA max./after 2min.) ESR (mЊ max./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No.

39 E46 312 50 1,860 APXG160ARA390ME46G

68 F45 544 40 2,450 APXG160ARA680MF45G

100 E61 320 27 3,000 APXG160ARA101ME61G

180 F61 576 22 3,300 APXG160ARA181MF61G

220 F80 704 22 3,300 APXG160ARA221MF80G

270 H70 864 22 3,300 APXG160ARA271MH70G

330 H70 1,050 22 3,300 APXG160ARA331MH70G

330 H80 1,050 21 3,400 APXG160ARA331MH80G

330 HA0 1,050 21 3,400 APXG160ARA331MHA0G

560 HA0 1,790 18 3,900 APXG160ARA561MHA0G

560 J80 1,790 20 3,800 APXG160ARA561MJ80G

820 JA0 2,620 16 4,200 APXG160ARA821MJA0G

820 JC0 2,620 12 5,400 APXG160ARA821MJC0G

1,000 JA0 3,200 18 4,100 APXG160ARA102MJA0G 1,000 JC0 3,200 12 5,400 APXG160ARA102MJC0G

27 E46 270 55 1,770 APXG200ARA270ME46G

47 E61 188 30 2,800 APXG200ARA470ME61G

47 F45 470 42 2,400 APXG200ARA470MF45G

56 E61 224 30 2,800 APXG200ARA560ME61G

120 F61 480 25 3,200 APXG200ARA121MF61G

150 F80 600 25 3,200 APXG200ARA151MF80G

180 H70 720 25 3,200 APXG200ARA181MH70G

220 H80 880 23 3,300 APXG200ARA221MH80G

220 HA0 880 23 3,400 APXG200ARA221MHA0G

390 HA0 1,560 20 3,700 APXG200ARA391MHA0G

390 J80 1,560 22 3,650 APXG200ARA391MJ80G

560 JA0 2,240 18 4,100 APXG200ARA561MJA0G

10 E46 125 60 1,700 APXG250ARA100ME46G

22 E61 110 40 2,450 APXG250ARA220ME61G

22 F45 275 45 2,350 APXG250ARA220MF45G

27 E61 135 40 2,450 APXG250ARA270ME61G

39 F61 195 30 2,800 APXG250ARA390MF61G

47 F61 235 30 2,800 APXG250ARA470MF61G

56 F61 280 30 2,800 APXG250ARA560MF61G

56 F80 280 28 2,800 APXG250ARA560MF80G

68 H70 340 28 3,000 APXG250ARA680MH70G

82 H80 410 26 3,100 APXG250ARA820MH80G

100 HA0 500 24 3,300 APXG250ARA101MHA0G

120 HA0 600 22 3,500 APXG250ARA121MHA0G

150 J80 750 25 3,400 APXG250ARA151MJ80G

220 JA0 1,100 20 3,800 APXG250ARA221MJA0G

CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS