APXA200ARA150MF45G | DigiCamel IC Datasheet

Online Datasheet

Read APXA200ARA150MF45G online.

APXA4R0ARA681 CHEMI-CON | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 2

Technical content

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Surface Mount NPCAP TM -PXASeries ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte ・Rated voltage range : 2.5 to 25Vdc, case size range : φ4×5.2L toφ10×12.2L ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range 2.5 to 25Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Surge Voltage Rated voltage×1.15 (Rated voltage 2.5 to 20Vdc, 25Vdc) / Rated voltage×1.00 (Rated voltage 23Vdc) (at 105℃) Leakage Current Shall not exceed values shown in STANDARD RATINGS. (at 20℃ after 2 minutes) Dissipation Factor (tanЎ) 0.12 max. (at 20℃, 120Hz) Low Temperature Characteristics (Max. Impedance Ratio) Endurance The following speciﬁcations shall be satisﬁed when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105℃. Appearance No signiﬁcant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial speciﬁed value ESR ≦150% of the initial speciﬁed value Leakage current ≦The initial speciﬁed value Bias Humidity The following speciﬁcations shall be satisﬁed when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours(F45 : 500 hours). Appearance No signiﬁcant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial speciﬁed value ESR ≦150% of the initial speciﬁed value Leakage current ≦The initial speciﬁed value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage speciﬁed at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No signiﬁcant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial speciﬁed value ESR ≦150% of the initial speciﬁed value Leakage current ≦The initial speciﬁed value Failure Rate 0.5% per 1,000 hours maximum (Conﬁdence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] 0.3max. A±0.2 W P Note : L+0.1/-0.2 for F45 L±0.5 for HC0 and JC0 Size code D55 E60 F45 F55 F60 H70 HC0 J80 JC0 φD 6.3 6.3 6.3 L 5.2 5.7 4.4 5.2 5.7 6.7 12.0 7.7 12.2 A 4.3 5.3 6.6 6.6 6.6 8.3 8.3 10.3 10.3 B 4.3 5.3 6.6 6.6 6.6 8.3 8.3 10.3 10.3 C 5.1 5.9 7.2 7.2 7.2 9.0 9.0 11.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 1.9 3.1 3.1 4.5 4.5

Terminal Code : A φD±0.5 B±0.2 C±0.2 L±0.3 (Note) ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Taping code Terminal code Series code Category A P X A A R A GM 1 3 42 6 7 8 9 10 13125 18171611 1514 Please refer to "Product code guide (conductive polymer type)" Capacitance code (ex. 10µF:100,100µF:101) Voltage code (ex. 6.3V:6R3,10V:100) Lower ESR PXA PXE P40 ◆MARKING A15L 16V EX) 16V39µF CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Surface Mount NPCAP TM -PXASeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code Leakage current (µA max./ after 2 min.) ESR (mЊ max./ 20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. WV (Vdc) Cap (µF) Size code Leakage current (µA max./ after 2 min.) ESR (mЊ max./ 20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. 2.5

220 F55 110 25 2,500 APXA2R5ARA221MF55G

4.7 D55 23.5 240 670 APXA100ARA4R7MD55G 220 F60 110 25 2,500 APXA2R5ARA221MF60G 6.8 D55 34.0 240 670 APXA100ARA6R8MD55G 560 H70 280 23 3,100 APXA2R5ARA561MH70G 10 D55 50.0 220 700 APXA100ARA100MD55G 680 HC0 340 12 4,770 APXA2R5ARA681MHC0G 15 D55 75.0 200 740 APXA100ARA150MD55G 1,000 J80 500 19 4,240 APXA2R5ARA102MJ80G 33 E60 66.0 40 1,270 APXA100ARA330ME60G 1,500 JC0 750 10 5,500 APXA2R5ARA152MJC0G 47 E60 94.0 40 1,270 APXA100ARA470ME60G 33 D55 66.0 200 740 APXA4R0ARA330MD55G 47 F45 235 41 1,560 APXA100ARA470MF45G 100 F55 80.0 26 2,450 APXA4R0ARA101MF55G 47 F60 94.0 31 2,250 APXA100ARA470MF60G 100 F60 80.0 26 2,450 APXA4R0ARA101MF60G 56 F55 112 31 2,250 APXA100ARA560MF55G

120 F45 240 38 1,710 APXA4R0ARA121MF45G 56 F60 112 31 2,250 APXA100ARA560MF60G

150 E60 120 30 1,490 APXA4R0ARA151ME60G 120 H70 240 27 2,800 APXA100ARA121MH70G

150 F55 120 26 2,450 APXA4R0ARA151MF55G 150 H70 300 27 2,800 APXA100ARA151MH70G

150 F60 120 26 2,450 APXA4R0ARA151MF60G 270 HC0 540 14 4,420 APXA100ARA271MHC0G

220 H70 176 25 3,020 APXA4R0ARA221MH70G 270 J80 540 24 3,770 APXA100ARA271MJ80G

330 H70 264 25 3,020 APXA4R0ARA331MH70G 330 HC0 660 14 4,420 APXA100ARA331MHC0G

470 J80 376 20 4,130 APXA4R0ARA471MJ80G 330 J80 660 24 3,770 APXA100ARA331MJ80G

560 HC0 448 12 4,770 APXA4R0ARA561MHC0G 470 JC0 940 12 5,300 APXA100ARA471MJC0G

680 J80 544 20 4,130 APXA4R0ARA681MJ80G 560 JC0 1,120 12 5,300 APXA100ARA561MJC0G

820 JC0 656 10 5,500 APXA4R0ARA821MJC0G

3.3 D55 26.4 260 660 APXA160ARA3R3MD55G 1,200 JC0 960 10 5,500 APXA4R0ARA122MJC0G 22 E60 70.4 45 1,210 APXA160ARA220ME60G 6.3 22 D55 69.3 200 740 APXA6R3ARA220MD55G 22 F45 176 45 1,490 APXA160ARA220MF45G 47 E60 59.2 35 1,380 APXA6R3ARA470ME60G 33 F60 105 37 2,050 APXA160ARA330MF60G 68 F60 85.6 27 2,400 APXA6R3ARA680MF60G 39 F55 124 37 2,050 APXA160ARA390MF55G

82 F45 258 40 1,670 APXA6R3ARA820MF45G 39 F60 124 37 2,050 APXA160ARA390MF60G

82 F55 103 27 2,400 APXA6R3ARA820MF55G 82 H70 262 30 2,700 APXA160ARA820MH70G

82 F60 103 27 2,400 APXA6R3ARA820MF60G 150 J80 480 26 3,430 APXA160ARA151MJ80G

100 E60 126 35 1,380 APXA6R3ARA101ME60G 180 HC0 576 16 4,360 APXA160ARA181MHC0G

100 F45 315 40 1,670 APXA6R3ARA101MF45G 180 J80 576 26 3,430 APXA160ARA181MJ80G

100 F55 126 27 2,400 APXA6R3ARA101MF55G 220 JC0 704 14 5,050 APXA160ARA221MJC0G

100 F60 126 27 2,400 APXA6R3ARA101MF60G 330 JC0 1,050 14 5,050 APXA160ARA331MJC0G

120 F60 151 27 2,400 APXA6R3ARA121MF60G

15 F45 150 57 1,300 APXA200ARA150MF45G

150 H70 189 25 3,020 APXA6R3ARA151MH70G 22 F55 88.0 50 1,650 APXA200ARA220MF55G 220 H70 277 25 3,020 APXA6R3ARA221MH70G 22 F60 88.0 50 1,650 APXA200ARA220MF60G

330 J80 415 20 4,130 APXA6R3ARA331MJ80G 39 H70 156 45 2,000 APXA200ARA390MH70G

390 HC0 491 12 4,770 APXA6R3ARA391MHC0G 47 H70 188 45 2,000 APXA200ARA470MH70G

470 HC0 592 12 4,770 APXA6R3ARA471MHC0G 82 J80 328 40 2,500 APXA200ARA820MJ80G

470 J80 592 20 4,130 APXA6R3ARA471MJ80G 150 JC0 600 20 4,320 APXA200ARA151MJC0G

680 JC0 856 10 5,500 APXA6R3ARA681MJC0G 23 15 F45 172 57 1,300 APXA230ARA150MF45G

820 JC0 1,030 10 5,500 APXA6R3ARA821MJC0G

10 F60 125 65 1,500 APXA250ARA100MF60G

22 H70 275 50 1,800 APXA250ARA220MH70G

39 J80 487 45 2,100 APXA250ARA390MJ80G

CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Product Information

APXA200ARA150MF45G specifications and overview.

Summary

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Description

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Source title APXA200ARA150MF45G Datasheet(PDF) - United Chemi-Con, Inc.

Related Parts

More parts from the same family.

Browse manufacturer