APTF1616LSEKJ3ZGKQBC KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
z 1.6mmX1.6mm SMD LED, 0.7mm thickness. z Low power consumption. z Can produce any color in visible spectrum, including white light. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z Low current IF=2mA operating. z RoHS compliant. Descriptions z The Hyper Red device is based on light emitting diode chip made from AlGaInP. z The Green source color devices are made with InGaN on Sapphire Light Emitting Diode. z The Blue source color devices are made with InGaN Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAO4460 REV NO: V.2B DATE: SEP/18/2015 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203015167 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 2mA Viewing Angle [1] Min. Typ. 2 θ1/2 APTF1616LSEKJ3ZGKQBC Hyper Red (AlGaInP) Water Clear 20 40 Green (InGaN) 20 50 Blue (InGaN) 6 14 120° Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green Blue 640 515 460 nm I F=2mA λD [1] Dominant Wavelength Hyper Red Green Blue 625 525 465 nm I F=2mA Δλ1/2 Spectral Line Half-width Hyper Red Green Blue nm I F=2mA C Capacitance Hyper Red Green Blue 100 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.8 2.65 2.65 2.1 3.1 3.1 V I F=2mA IR Reverse Current Hyper Red Green Blue uA V R=5V Parameter Hyper Red Green Blue Units Power dissipation 63 77.5 93 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 150 150 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Electrostatic Discharge Threshold (HBM) 3000 450 250 V Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
SPEC NO: DSAO4460 REV NO: V.2B DATE: SEP/18/2015 PAGE: 3 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203015167 APTF1616LSEKJ3ZGKQBC Hyper Red
SPEC NO: DSAO4460 REV NO: V.2B DATE: SEP/18/2015 PAGE: 4 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203015167 Green
SPEC NO: DSAO4460 REV NO: V.2B DATE: SEP/18/2015 PAGE: 5 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203015167 Blue
SPEC NO: DSAO4460 REV NO: V.2B DATE: SEP/18/2015 PAGE: 6 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203015167 APTF1616LSEKJ3ZGKQBC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) Reel Dimension
SPEC NO: DSAO4460 REV NO: V.2B DATE: SEP/18/2015 PAGE: 7 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203015167 PACKING & LABEL SPECIFICATIONS APTF1616LSEKJ3ZGKQBC Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes