APTD3216SURC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

/G7A3.2mmx1.6mm SMT LED,1.8mm THICKNESS. /G7ALOW POWER CONSUMPTION. /G7AWIDE VIEWING ANGLE. /G7AIDEAL FOR BACKLIGHT AND INDICATOR. /G7APACKAGE : 2000PCS / REEL. /G7ARoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice.

SPEC NO: DSAB9994 REV NO: V.6 DATE: MAR/16/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203002299 Selection Guide N ote: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2 θ 1/2 APTD3216SURC 50°HYPER RED (InGaAlP) WATER CLEAR 280 600 Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Hyper Red 640 nm IF=20mA λD Dominant Wavelength Hyper Red 628 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C

SPEC NO: DSAB9994 REV NO: V.6 DATE: MAR/16/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203002299 Hyper Red APTD3216SURC

SPEC NO: DSAB9994 REV NO: V.6 DATE: MAR/16/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203002299 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) APTD3216SURC If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.