APTB1615SURKCGKC-F01_15 KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
1.6mmx1.5mm SMT LED, 0.7mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package : 2000pcs / reel. Moisture sensitivity level : level 3. RoHS compliant. Descriptions The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF9413 REV NO: V.9A DATE: JAN/08/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203002123 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 APTB1615SURKCGKC-F01 Hyper Red (AlGaInP) Water Clear 120 200 120° *40 *80 20 50 *20 *50 Green (AlGaInP) Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green 645 574 nm I F=20mA λD [1] Dominant Wavelength Hyper Red Green 630 570 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red Green 20 nm I F=20mA C Capacitance Hyper Red Green 15 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5
2.5 V I F=20mA
IR Reverse Current Hyper Red Green 10 10 uA V R = 5V Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C
SPEC NO: DSAF9413 REV NO: V.9A DATE: JAN/08/2015 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203002123 APTB1615SURKCGKC-F01 Hyper Red
SPEC NO: DSAF9413 REV NO: V.9A DATE: JAN/08/2015 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203002123 Green
SPEC NO: DSAF9413 REV NO: V.9A DATE: JAN/08/2015 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203002123 APTB1615SURKCGKC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)
SPEC NO: DSAF9413 REV NO: V.9A DATE: JAN/08/2015 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203002123 PACKING & LABEL SPECIFICATIONS APTB1615SURKCGKC-F01 Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes