APT6029BLL_04 ADPOW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified. G D S CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com TO-247 D3PAK BLL SLL APT6029BLL APT6029SLL 600V 21A 0.290 ΩΩΩΩΩ Power MOS 7 ® is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching losses are addressed with Power MOS 7 by significantly lowering RDS(ON) and Qg. Power MOS 7 ® combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure.

  • Lower Input Capacitance • Increased Power Dissipation
  • Lower Miller Capacitance • Easier To Drive
  • Lower Gate Charge, Qg • TO-247 or Surface Mount D POWER MOS 7 R MOSFET Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) Drain-Source On-State Resistance 2 (VGS = 10V, ID = 10.5A) Zero Gate Voltage Drain Current (VDS = 600V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 480V, VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 1mA) Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25°C Pulsed Drain Current 1 Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current 1 (Repetitive and Non-Repetitive) Repetitive Avalanche Energy 1 Single Pulse Avalanche Energy 4 UNIT Volts Amps Volts Watts W/°C Amps mJ STATIC ELECTRICAL CHARACTERISTICS Symbol BVDSS RDS(on) IDSS IGSS VGS(th) UNIT Volts Ohms µA nA Volts APT6029BFLL_SFLL 600 ±30 ±40 300 2.40 -55 to 150 300 1210 MIN TYP MAX 600 0.290 100 500 ±100

DYNAMIC CHARACTERISTICS APT6029BLL_SLL 050-7054 Rev D 9-2004 Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current 1 (Body Diode) Diode Forward Voltage 2 (VGS = 0V, IS = -21A) Reverse Recovery Time (IS = -21A, dlS/dt = 100A/µs) Reverse Recovery Charge (IS = -21A, dlS/dt = 100A/µs) Peak Diode Recovery dv/dt 5 UNIT Amps Volts ns µC V/ns MIN TYP MAX 1.3 580 7.92 Symbol RθJC RθJA MIN TYP MAX 0.42 UNIT °C/W Characteristic Junction to Case Junction to Ambient Symbol IS ISM VSD t rr Q rr dv/dt Symbol Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy 6 Turn-off Switching Energy Test Conditions VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 300V ID = 21A @ 25°C RESISTIVE SWITCHING VGS = 15V VDD = 300V ID = 21A @ 25°C RG = 1.6Ω INDUCTIVE SWITCHING @ 25°C VDD = 400V, VGS = 15V ID = 21A, RG = 5Ω INDUCTIVE SWITCHING @ 125°C VDD = 400V VGS = 15V ID = 21A, RG = 5Ω MIN TYP MAX 2615 420 225 360 110 UNIT pF nC ns µJ SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS THERMAL CHARACTERISTICS

1 Repetitive Rating: Pulse width limited by maximum junction

2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2%

3 See MIL-STD-750 Method 3471

4 Starting T j = +25°C, L = 5.49mH, RG = 25Ω, Peak IL = 21A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS ≤ -ID21A di/dt ≤ 700A/µs VR ≤ VDSS TJ ≤ 150°C 6 Eon includes diode reverse recovery. See figures 18, 20. APT Reserves the right to change, without notice, the specifications and information contained herein. Note: Duty Factor D = t1/t2 Peak TJ = PDM x ZθJC + TC PDM SINGLE PULSE ZθJC, THERMAL IMPEDANCE (°C/W) 10-5 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.5 0.1 0.3 0.7 0.9 0.05