APT42F50B_09 MICROSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Thermal and Mechanical Characteristics G D S Single die FREDFET Unit A V mJ A Unit W °C/W oz g in·lbf N·m Ratings 135 ±30 930 Min Typ Max 625 0.20 0.11 -55 150 300 0.22 6.2 1.1 Parameter Continuous Drain Current @ T C = 25°C Continuous Drain Current @ TC = 100°C Pulsed Drain Current 1 Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive Characteristic Total Power Dissipation @ TC = 25°C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) Package Weight Mounting Torque ( TO-247 Package), 6-32 or M3 screw Symbol I D IDM VGS EAS IAR Symbol PD RθJC RθCS TJ,TSTG TL WT Torque TYPICAL APPLICATIONS ZVS phase shifted and other full bridge Half bridge PFC and other boost converter Buck converter Single and two switch forward Flyback
FEATURES
Fast switching with low EMI Low t rr for high reliability Ultra low C rss for improved noise immunity Low gate charge Avalanche energy rated RoHS compliant TO-247 D3PAK APT42F50B APT42F50S 500V, 42A, 0.13Ω Max, trr, ≤260ns APT42F50B APT42F50S Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. This 'FREDFET' version has a drain-source (body) diode that has been optimized for high reliability in ZVS phase shifted bridge and other circuits through reduced t rr, soft recovery, and high recovery dv/dt capability. Low gate charge, high gain, and a greatly reduced ratio of C rss/Ciss result in excellent noise immunity and low switching loss. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control di/dt during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Microsemi Website - http://www.microsemi.com 050-8084 Rev E 08-2009
Static Characteristics T J = 25°C unless otherwise specifi ed Dynamic Characteristics T J = 25°C unless otherwise specifi ed Source-Drain Diode Characteristics 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 4.22mH, RG = 25Ω, IAS = 21A. 3 Pulse test: Pulse Width < 380µs, duty cycle < 2%. 4 Co(cr) is defi ned as a fi xed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 C o(er) is defi ned as a fi xed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of V DS less than V(BR)DSS, use this equation: Co(er) = -1.84E-7/VDS^2 + 3.75E-8/VDS + 1.05E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifi cations and information contained herein. G D S Unit V V/°C Ω V mV/°C µA nA Unit S pF nC ns Unit A V ns µC A V/ns Min Typ Max 500 0.60 0.11 0.13 2.5 4 5 -10 250 1000 ±100 Min Typ Max 135 1.0 225 260 400 480 1.00 2.50 9.1 12.9 Min Typ Max 6810 735 425 215 170 Test Conditions VGS = 0V, ID = 250µA Reference to 25°C, ID = 250µA VGS = 10V, ID = 21A VGS = VDS, ID = 1mA V DS = 500V T J = 25°C V GS = 0V T J = 125°C VGS = ±30V Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) I SD = 21A, TJ = 25°C, VGS = 0V T J = 25°C T J = 125°C ISD = 21A 3 T J = 25°C di SD/dt = 100A/µs T J = 125°C V DD = 100V T J = 25°C T J = 125°C ISD ≤ 21A, di/dt ≤1000A/µs, VDD = 333V, TJ = 125°C Test Conditions VDS = 50V, ID = 21A VGS = 0V, VDS = 25V f = 1MHz VGS = 0V, VDS = 0V to 333V VGS = 0 to 10V, ID = 21A, VDS = 250V Resistive Switching VDD = 333V, ID = 21A RG = 4.7Ω 6 , VGG = 15V Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coeffi cient Drain-Source On Resistance 3 Gate-Source Threshold Voltage Threshold Voltage Temperature Coeffi cient Zero Gate Voltage Drain Current Gate-Source Leakage Current Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Peak Recovery dv/dt Parameter Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time Symbol VBR(DSS) ΔVBR(DSS)/ΔTJ RDS(on) VGS(th) ΔVGS(th)/ΔTJ IDSS IGSS Symbol IS ISM VSD trr Qrr Irrm dv/dt Symbol gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf 050-8084 Rev E 08 -2009 AP42F50B_S