APT20M10JLL ADPOW | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
ADVANCE TECHNICALINFORMATION Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) On State Drain Current 2 (VDS > ID(on) x RDS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.]) Zero Gate Voltage Drain Current (VDS = VDSS , VGS = 0V) Zero Gate Voltage Drain Current (VDS = 0.8 VDSS , VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS , ID = 5mA) 050-7022 Rev A 8-2001 MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified. Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ T C = 25°C Pulsed Drain Current 1 Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ T C = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current 1 (Repetitive and Non-Repetitive) Repetitive Avalanche Energy 1 Single Pulse Avalanche Energy 4 UNIT Volts Amps Volts Watts W/°C Amps mJ STATIC ELECTRICAL CHARACTERISTICS Symbol BV DSS ID(on) R DS(on) IDSS IGSS VGS(th) UNIT Volts Amps Ohms µA nA Volts MIN TYP MAX 200 180 0.010 100 500 ±100 APT20M10JLL 200 180 720 ±30 ±40 690 5.52 -55 to 150 300 180 3600 APT20M10JLL 200V 185A 0.010 W G D S CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 SOT-227 G S S D ISOTOP ® "UL Recognized" POWER MOS 7 TM Power MOS 7TM is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching losses are addressed with Power MOS 7 TM by significantly lowering RDS(ON) and Qg. Power MOS 7TM combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure.
- Lower Input Capacitance • Increased Power Dissipation
- Lower Miller Capacitance • Easier To Drive
- Lower Gate Charge, Qg • Popular SOT-227 Package
ADVANCE TECHNICALINFORMATION DYNAMIC CHARACTERISTICS APT20M10JLL 050-7022 Rev A 8-2001 THERMAL CHARACTERISTICS Symbol R qJC R qJA MIN TYP MAX 0.18 UNIT °C/W Characteristic Junction to Case Junction to Ambient APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 SOT-227 (ISOTOP® ) Package Outline 31.5 (1.240) 31.7 (1.248) Dimensions in Millimeters and (Inches) 7.8 (.307) 8.2 (.322) 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504) 14.9 (.587) 15.1 (.594) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) 0.75 (.030) 0.85 (.033) 12.6 (.496) 12.8 (.504) 25.2 (0.992) 25.4 (1.000) 1.95 (.077) 2.14 (.084) * Source Drain Gate r = 4.0 (.157) (2 places) 4.0 (.157) 4.2 (.165) (2 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 3.3 (.129) 3.6 (.143) * Source Source terminals are shorted internally. Current handling capability is equal for either Source terminal. Symbol C iss C oss C rss Q g Q gs Q gd td(on) tr td(off) tf Test Conditions VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 0.5 VDSS ID = ID[Cont.] @ 25°C VGS = 15V VDD = 0.5 VDSS ID = ID[Cont.] @ 25°C R G = 0.6W MIN TYP MAX 12780 4330 327 316 174 UNIT pF nC ns Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge 3 Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current 1 (Body Diode) Diode Forward Voltage 2 (VGS = 0V, IS = -ID[Cont.]) Reverse Recovery Time (IS = -ID[Cont.], dlS /dt = 100A/µs) Reverse Recovery Charge (IS = -ID[Cont.], dlS /dt = 100A/µs) Peak Diode Recovery dv/dt 5 SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS UNIT Amps Volts ns µC V/ns MIN TYP MAX 180 720 1.3 460 7.0 Symbol IS ISM VSD t rr Q rr dv/dt
1 Repetitive Rating: Pulse width limited by maximum junction3 See MIL-STD-750 Method 3471
temperature. 4 Starting Tj = +25°C, L = 0.22mH, RG = 25W, Peak IL = 180A 2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 5d v/dt numbers reflect the limitations of the test circuit rather than the device itself. IS £ -ID [Cont.] di/dt £ 700A/µs VR £ VDSS TJ £ 150°C APT Reserves the right to change, without notice, the specifications and information contained herein.